Acer Labs 1543C IDE/ATAPI CD-ROM adapter
- Copy Page Tree
- Kirill Nikolaev (Unlicensed)
- Bruno Miretti (Deactivated)
Table of Contents
General description
CHARON-AXP supports emulation of an integrated virtual Acer Labs 1543C IDE/ATAPI controller.
Loading Acer Labs 1543C IDE/ATAPI adapter
By default the integrated virtual Acer Labs 1543C IDE/ATAPI controller is preloaded with a name "ide".
Example:
set ide container="\\.\CdRom0" |
Configuration parameters
The Acer Labs 1543C IDE/ATAPI adapter emulation has only one configuration parameter:
container
| Parameter | container |
|---|---|
| Type | Text String |
| Value | Specifies the name of ATAPI or SATA CD/DVD-ROM drive attached to the host system. The supported values are of the form “\\.\CdRomN”, where N is 0, 1, 2… In most cases 0 is the only meaningful value for N, because usually the host system has only one CD/DVD-ROM drive. By default it is left unspecified. |
Example
set ide container="\\.\CdRom0" |
When running HP OpenVMS/Alpha Operating System on CHARON VM the specified CD/DVD-ROM drive is available as DQA0: device.
CHARON-AXP is able to boot any OpenVMS/Alpha and Tru64 version from Acer Labs 1543C IDE/ATAPI CD-ROM.
Virtual Acer Labs 1543C IDE/ATAPI can me mapped only to physical CD-ROM drives. If a CD-ROM container or an ISO file should be used, it is required to utilize KZPBA-CA controller as it offers full support of both physical and virtual mappings to system resources.
© Stromasys, 1999-2024 - All the information is provided on the best effort basis, and might be changed anytime without notice. Information provided does not mean Stromasys commitment to any features described.