PBXDA-xx series PCI serial adapters
Table of Contents
General description
CHARON-AXP supports emulation of PBXDA-xx family PCI serial adapter based on DIGI AccelePort serial adapters via CHARON PCI Pass Through mode (using a specific CHARON PCI Pass Through driver) and by direct virtualization.
CHARON PCI Pass Through mode enables connection between the virtual PBXDA-xx PCI serial adapter and the physical DIGI AccelePort PCI serial adapter plugged into a hosting server PCI bus whether as the direct virtualization may address the host serial port or TCP/IP port.
Virtual PBXDA-xx PCI serial adapter
Loading virtual PBXDA-xx serial lines adapter
Syntax for loading PBXDA (AccelePort 2r 920) serial lines adapter:
|
Syntax for loading PBXDA_BA (AccelePort 4r 920) serial lines adapter:
|
Syntax for loading PBXDA_BB (AccelePort 8r 920) serial lines adapter:
|
Syntax for loading PBXDA_AC (AccelePort Xem) serial lines adapter:
|
Example:
load PBXDA/DIGI TXA |
The adapter instance name ("TXA" in the example above) is used then for parametrization, for example:
set TXA line[2]="COM1:" |
The numbers in the square brackets represent line number on the virtual PBXDA-xx adapter starting from 0.
| Controller type | Maximum number of lines |
|---|---|
| PBXDA | 2 |
| PBXDA_BA | 4 |
| PBXDA_BB | 8 |
| PBXDA_AC | 16 |
DIGI drivers for OpenVMS and Tru64 are sensitive to PBXDA-xx location on PCI, therefore it is recommended to fix PBXDA-xx location with explicit configuration.
For example:
load PBXDA TXA bus=pci_1 device=4 function=0 |
Configuration parameters
The PBXDA-xx serial lines adapter emulation has the following configuration parameters:
port
| Parameter | port | ||
|---|---|---|---|
| Type | Text String | ||
| Value | Specifies a local port for incoming telnet connections By default the "port" configuration option is not specified. Syntax:
Example:
|
line
| Parameter | line |
|---|---|
| Type | Text string |
| Value | A defined COM port on host system: Example:
|
Pass-through mode
Loading PBXDA-xx PCI serial adapter in pass-through mode
Note the model of DIGI AccelePort PCI serial adapter for emullation of a particular model of PBXDA-xx family PCI serial adapter:
DEC PBXDA-xx adapter | Name of the device to map to | Controller | Vendor ID | Device ID |
|---|---|---|---|---|
| PBXDA-BA | DIGI AccelePort 4r 920 | ASIC PCI | 114Fh | 0026h |
| PBXDA-BB | DIGI AccelePort 8r 920 | ASIC PCI | 114Fh | 0027h |
| PBXDA-AC | DIGI AccelePort Xem | ASIC PCI | 114Fh | 0004h |
| PBXDA-AC | DIGI AccelePort Xem | ASIC PCI | 114Fh | 0008h |
Syntax for loading PBXDA-xx PCI serial adapter:
load digi <name> |
Example:
load digi SERIAL_A |
By default PBXDA-xx adapter uses first available PCI slot. If instead some particular slot is needed, refer to this section for details of specific placement of PCI peripherals on CHARON Virtual Machine (VM) PCI bus.
In AlphaStation 400 configuration use the following syntax for PBXDA-xx PCI serial adapter loading:
load digi SERIAL_A irq_bus = isa |
Configuration parameters
The PBXDA-xx PCI serial adapter emulation has only one configuration parameter:
host_bus_location
| Parameter | host_bus_location | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | Text String | ||||||||||
| Value | Establish connection between virtual PBXDA-xx PCI serial adapter and physical DIGI AccelePort PCI serial adapter installed on CHARON host (pass through mode) Syntax:
where:
Example:
|
Installation of DIGI AccelePort PCI serial adapter
- Install the DIGI AccelePort PCI serial adapter to some spare PCI slot of the host system
- Boot a Windows operating system
- Open “Computer Management”
- Select “Device Manager”
- In the right window select the desired physical serial adapter connected to the system, right-click the mouse button, and the corresponding menu will appear.
- From the menu select “Update driver…”. Windows will show “Hardware Upgrade Wizard”
- Select “No, not this time”, click “Next”
- Select “Install from a list or specific location (Advanced)”, click “Next”
- Select “Don’t search. I will choose the driver to install”, click “Next”
- Click “Have Disk…”. Windows shows dialog “Install From Disk”
- Instead of “A:\”, click “Browse” and select path to the folder in which driver’s INF file is located (typically "C:\Program Files\CHARON\Drivers\DIGI_X.X.0.XXXXX"), select “digi_ppt_amd64.inf”, and click “Open”
- The “Hardware Upgrade Wizard” should have “CHARON DIGI adapter”. Select it, and click “Next”
- There will be one or two more dialogs, but they are usual for device driver installation.
- Reboot the host
Upon completion, a new device will appear in the device manager with the CHARON logo on it.
Mapping to host DIGI AccelePort PCI serial adapter
Open “Computer Management” application and select “Device Manager”:
In the right panel select proper physical DIGI adapter:
Open its properties sheet by double-clicking on the selected adapter:
The “Location:” on the above picture gives X, Y, and Z for the "host_bus_location" parameter, for example:
|
Non-US-EN installations of Windows may present “Location:” string in local language, but "host_bus_location" parameter requires English notation, so the words “PCI”, “bus”, “device”, and “function” must be specified in English.
© Stromasys, 1999-2024 - All the information is provided on the best effort basis, and might be changed anytime without notice. Information provided does not mean Stromasys commitment to any features described.