Product Documentation and Knowledge Base - HomeDocumentation


Charon-VAXCharon-AXPCharon-PDPCharon-SSPCharon-PAR

[cpu] Section

Owned by Tim Sneddon (Unlicensed)
Last updated: Feb 22, 2015
1 min read

This section controls options related to the operation of the virtual machines CPUs.  The following list each of the available options:

  • dit – Enable/disable Dynamic Instruction Translation.
  • number – Specify number of virtual CPUs.

dit 

Enable/disable Dynamic Instruction Translation.

Syntax

dit = on | off

Description

This option enables of disables the Dynamic Instruction Translation (DIT) mode.  This can provide significant performance increase if enabled.

Enabling this option will consume approximately 600MB of additional host memory.

number 

Specify number of virtual CPUs.

Syntax

number = cpu-count

Description

This option specifies the total number of CPUs the virtual machine is to provide.  The table below lists each supported virtual machine and the maximum number of CPUs.

Maximum Number of CPUs per Virtual Machine Model
MachineModel NameMax. CPUs
SPARCstation_20Sun SPARCstation 201
Enterprise_450Sun Enterprise 45024


© Stromasys, 1999-2024  - All the information is provided on the best effort basis, and might be changed anytime without notice. Information provided does not mean Stromasys commitment to any features described.