HP AlphaServer 800 configuration file

#
# Copyright (C) 1999-2014 STROMASYS
# All rights reserved.
#
# The software contained on this media is proprietary to and embodies
# the confidential technology of STROMASYS. Possession, use, duplication,
# or dissemination of the software and media is authorized only pursuant
# to a valid written license from STROMASYS.
#
#============================================================================
#
# Sample configuration file for AlphaServer 800 machines.
#
#----------------------------------------------------------------------------

set session hw_model = AlphaServer_800

#============================================================================
#
# Select name of the instance to differentiate it among other instances
# running on the same host.
#
#----------------------------------------------------------------------------

#set session configuration_name = AlphaServer_800

#============================================================================
#
# Disable rotating LOG and enable single file LOG. Select either appending or
# overwriting it on every instance start. Then specify desired log file name
# and path to it.
#
#----------------------------------------------------------------------------

#set session log_method = append
#set session log_method = overwrite
#set session log = AlphaServer_800.log

#============================================================================
#
# Overrides system assigned process's CPU affinity. The session changes
# the process's CPU affinity to the one specified.
#
#----------------------------------------------------------------------------

#set session affinity="0, 1, 2, 3"

#============================================================================
#
# The 'n_of_io_cpus' option overrides number of host CPU cores reserved for
# I/O processing. If omitted the session reserves 33% of available host CPU
# cores for I/O processing. Note that total amount of available host CPU
# cores is determined based on process's CPU affinity.
#
#----------------------------------------------------------------------------

#set session n_of_io_cpus=1
#set session n_of_io_cpus=2
#set session n_of_io_cpus=...

#============================================================================
#
# AlphaServer 800 5/333
#
#----------------------------------------------------------------------------

set ace cpu_architecture = EV56
set rom dsrdb[0] = 1310 system_name = "AlphaServer 800 5/333"

#============================================================================
#
# AlphaServer 800 5/400
#
#----------------------------------------------------------------------------

#set ace cpu_architecture = EV56
#set rom dsrdb[0] = 1584 system_name = "AlphaServer 800 5/400"

#============================================================================
#
# AlphaServer 800 5/500
#
#----------------------------------------------------------------------------

#set ace cpu_architecture = EV56
#set rom dsrdb[0] = 1585 system_name = "AlphaServer 800 5/500"

#============================================================================
#
# Override default System Serial Number.
#
#----------------------------------------------------------------------------

#set rom system_serial_number = SN01234567

#============================================================================
#
# Specify size of RAM from 256MB up to 8192MB (8GB) in 256MB extents.
#
#----------------------------------------------------------------------------

#set ram size=256
#set ram size=512
#set ram size=1024
#set ram size=4096
#set ram size=8192

#============================================================================
#
# Uncomment to allow the virtual SRM console environment be preserved across
# emulator restarts.
#
#----------------------------------------------------------------------------

#set rom container="AlphaServer_800.bin"

#============================================================================
#
# Uncomment to allow saving CMOS NVRAM content, so that to preserve
# Time & Date information.
#
#----------------------------------------------------------------------------

#set toy container="AlphaServer_800.dat"

#============================================================================
#
# Select connection for the console serial line OPA0.
#
#----------------------------------------------------------------------------

#load physical_serial_line OPA0 line="COM1:"
#load virtual_serial_line OPA0 port=10003
#load virtual_serial_line OPA0 port=10003 application="opa0.ht"
load virtual_serial_line OPA0 port=10003 application="putty -load OPA0"
#load virtual_serial_line OPA0 port=10003 application="c:\kea\user\opa0.ktc"

#============================================================================
#
# Select connection for the serial line TTA0.
#
#----------------------------------------------------------------------------

#load physical_serial_line TTA0 line="COM2:"
#load virtual_serial_line TTA0 port=10000
#load virtual_serial_line TTA0 port=10000 application="tta0.ht"
#load virtual_serial_line TTA0 port=10000 application="putty -load TTA0"
#load virtual_serial_line TTA0 port=10000 application="c:\kea\user\tta0.ktc"

#============================================================================
#
# If TTA0 is loaded, attach it to secondary serial line controller COM2.
#
#----------------------------------------------------------------------------

#set COM2 line=TTA0

#============================================================================
#
# Improve granularity of emulated AXP timer.
#
#----------------------------------------------------------------------------

#set eisa clock_period=1000

#============================================================================
#
# Load optional DE500BA PCI Ethernet Adapter (EWA).
#
#----------------------------------------------------------------------------

#load DE500BA/dec21x4x EWA interface=EWA0
#load packet_port/chnetwrk EWA0 interface="(disabled)"
#load packet_port/chnetwrk EWA0 interface="connection:<connection-name>"

#============================================================================
#
# The AlphaServer 800 contains built-in PCI SCSI adapter called PKA within
# the configuration file.
#
#----------------------------------------------------------------------------
#
# Uncomment to connect the emulator's DKA0 to the disk image.
#
#----------------------------------------------------------------------------

#set PKA container[0] = "<file-name>.vdisk"

#============================================================================
#
# Uncomment to connect the emulator's DKA100 to host's disk drive.
#
#----------------------------------------------------------------------------

#set PKA container[100]="\\.\PhysicalDrive0"
#set PKA container[100]="\\.\PhysicalDrive<N>"

#============================================================================
#
# Uncomment to connect the emulator's GKA200 to an unknown SCSI device.
#
#----------------------------------------------------------------------------

#set PKA container[200]="\\.\ScsiN:X:Y:Z"

#============================================================================
#
# Uncomment to connect the emulator's DKA300 to host's CD/DVD-ROM drive.
#
#----------------------------------------------------------------------------

#set PKA container[300]="\\.\CdRom0"
#set PKA container[300]="\\.\CdRom<N>"

#============================================================================
#
# Uncomment to connect the emulator's DKA400 to .ISO file (CD/DVD-ROM image).
#
#----------------------------------------------------------------------------

#set PKA container[400] = "<file-name>.iso"

#============================================================================
#
# Uncomment to connect the emulator's MKA500 to host's SCSI tape drive.
#
#----------------------------------------------------------------------------

#set PKA container[500]="\\.\Tape0"
#set PKA container[500]="\\.\Tape<N>"

#============================================================================
#
# Uncomment to connect the emulator's MKA600 to .VTAPE file (tape image).
#
#----------------------------------------------------------------------------

#set PKA container[600] = "<file-name>.vtape"

#============================================================================
#
# Uncomment to connect the emulator's DKA600 to host's 3.5" FDD. Uncomment
# the next line for the FDD to appear as DEC RX23 (otherwise it appears as
# DEC RX26).
#
# Either "A:" or "B:" may be used in container specification.
#
#----------------------------------------------------------------------------

#set PKA container[600]="\\.\A:"
#set PKA media_type[600]="RX23"

#============================================================================
#
# Uncomment to enable emulation of secondary DEC-KZPBA SCSI controller (PKB).
#
#----------------------------------------------------------------------------

#load KZPBA PKB scsi_id = 7

#============================================================================
#
# Uncomment to connect the emulator's DKB0 to the disk image.
#
#----------------------------------------------------------------------------

#set PKB container[0] = "<file-name>.vdisk"

#============================================================================
#
# Uncomment to connect the emulator's DKB100 to host's disk drive.
#
#----------------------------------------------------------------------------

#set PKB container[100]="\\.\PhysicalDrive0"
#set PKB container[100]="\\.\PhysicalDrive<N>"

#============================================================================
#
# Uncomment to connect the emulator's GKB200 to an unknown SCSI device.
#
#----------------------------------------------------------------------------

#set PKB container[200]="\\.\ScsiN:X:Y:Z"

#============================================================================
#
# Uncomment to connect the emulator's DKB300 to host's CD/DVD-ROM drive.
#
#----------------------------------------------------------------------------

#set PKB container[300]="\\.\CdRom0"
#set PKB container[300]="\\.\CdRom<N>"

#============================================================================
#
# Uncomment to connect the emulator's DKB400 to .ISO file (CD/DVD-ROM image).
#
#----------------------------------------------------------------------------

#set PKB container[400] = "<file-name>.iso"

#============================================================================
#
# Uncomment to connect the emulator's MKB500 to host's SCSI tape drive.
#
#----------------------------------------------------------------------------

#set PKB container[500]="\\.\Tape0"
#set PKB container[500]="\\.\Tape<N>"

#============================================================================
#
# Uncomment to connect the emulator's MKB600 to .VTAPE file (tape image).
#
#----------------------------------------------------------------------------

#set PKB container[600] = "<file-name>.vtape"

#============================================================================
#
# Uncomment to connect the emulator's DKB600 to host's 3.5" FDD. Uncomment
# the next line for the FDD to appear as DEC RX23 (otherwise it appears as
# DEC RX26).
#
# Either "A:" or "B:" may be used in container specification.
#
#----------------------------------------------------------------------------

#set PKB container[600]="\\.\A:"
#set PKB media_type[600]="RX23"

#============================================================================
#
# Uncomment to enable emulation of DEC-KGPSA-CA PCI FC Adapter.
#
#----------------------------------------------------------------------------

#load KGPSA FGA

#============================================================================
#
# Uncomment to connect the emulator's $1$DGA0 to the disk image.
#
#----------------------------------------------------------------------------

#set FGA container[0] = "<file-name>.vdisk"

#============================================================================
#
# Uncomment to connect the emulator's $1$DGA100 to host's disk drive.
#
#----------------------------------------------------------------------------

#set FGA container[100] = "\\.\PhysicalDrive<N>"

#============================================================================
#
# Uncomment to enable emulation of secondary DEC-KGPSA-CA PCI FC Adapter.
#
#----------------------------------------------------------------------------

#load KGPSA FGB

#============================================================================
#
# Uncomment to enable PCI Pass Through access to physical EMULEX LP FC HBA,
# use two adapters to provide multipath with failover.
#
#----------------------------------------------------------------------------

#set FGA host_bus_location = "PCI bus X, device Y, function Z"
#set FGB host_bus_location = "PCI bus A, device B, function C"

# this is the end of the configuration file #################################

Back to Top