Scan SCSI bus for attached devices.
Syntax
|
Description
This command scan the SCSI bus to locate attached devices.
Set configuration parameter to the given decimal or text value.
setenv Variables| Variable | Default Value | Description |
|---|---|---|
auto-boot? | false | If true, boots automatically after power on or reset. |
boot-file | empty string | A string of arguments to be passed to the boot loader (e.g. -a or -v). |
boot-device | Device to boot from. | |
ttya-mode | 9600,8,n,1,- | |
ttyb-mode | 9600,8,n,1,- |
Parameter Name Value Default Value
auto-boot? false true
boot-file -v
boot-device disk:a disk1 disk net
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
Usage: setenv name value ( -- )
Examples:
setenv boot-device disk1 - specify disk1 as boot device
setenv auto-boot? false - disable automatic boot
Notice: changes are permanent but only take effect after a reset
Changes to environment variables are stored in NVRAM and permanent. However, they only take effect after executing the
reset command.Example
The following example demonstrates the output of the probe-scsi command on system with a single virtual CD-ROM..
Example
probe-scsi Command Output
|