PBXDA-xx series PCI serial adapters
Table of Contents
General description
CHARON-AXP supports emulation of PBXDA-xx family PCI serial adapter based on DIGI AccelePort serial adapters via CHARON PCI Pass Through mode (using a specific CHARON PCI Pass Through driver).
CHARON PCI Pass Through mode enables connection between the virtual PBXDA-xx PCI serial adapter and the physical DIGI AccelePort PCI serial adapter plugged into a hosting server PCI bus.
Note the model of DIGI AccelePort PCI serial adapter for emullation of a particular model of PBXDA-xx family PCI serial adapter:
DEC PBXDA-xx adapter | Name of the device to map to | Controller | Vendor ID | Device ID |
|---|---|---|---|---|
PBXDA-BA | DIGI AccelePort 4r 920 | ASIC PCI | 114Fh | 0026h |
PBXDA-BB | DIGI AccelePort 8r 920 | ASIC PCI | 114Fh | 0027h |
PBXDA-AC | DIGI AccelePort Xem | ASIC PCI | 114Fh | 0004h |
PBXDA-AC | DIGI AccelePort Xem | ASIC PCI | 114Fh | 0008h |
Loading PBXDA-xx PCI serial adapter
Syntax for loading PBXDA-xx PCI serial adapter:
|
Example:
|
In AlphaStation 400 configuration use the following syntax for PBXDA-xx PCI serial adapter loading:
By default PBXDA-xx adapter uses first available PCI slot. If instead some particular slot is needed, refer to this section for details of specific placement of PCI peripherals on CHARON-AXP PCI bus.
Configuration parameters
The PBXDA-xx PCI serial adapter emulation has only one configuration parameter:
host_bus_location
Parameter | host_bus_location | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Type | Text String | ||||||||||
Value | Establish connection between virtual PBXDA-xx PCI serial adapter and physical DIGI AccelePort PCI serial adapter installed on CHARON-AXP host (pass through mode) Syntax:
where:
Example:
|