To add additional disk storage to your Charon-SSP GCP instance (for example, for storing virtual disk containers), perform the steps described below.

Steps in the GCP Storage Environment

In the GCP environment, you can, for example,

create a new storage volume,
attach an existing storage volume to your instance,
detach a storage volume from your instance.

These steps are shown below.

For more details, please refer to the GCP documentation

Creating a New Volume

Please note: You can also create a new disk from the Edit VM function. The present example shows how to create a new disk in the disk section.

Step 1: open the disk creation window.

As shown in the example below, select Compute Engine > Disks to get to the disk overview page. On this page click on Create Disk to open the disk creation window.

Step 2: enter the disk information in the disk creation window.

Once the disk creation window has been opened, add the required information and select the disk size and characteristics appropriate for your project. The image below shows an example:

When done with entering the information, click on Create at the bottom of the screen.

The new disk will be listed on the disk overview page:

Attaching an Existing Volume to an Instance

Once a volume has been created, you can attach it to your instance.

Step 1: open the editor for your instance.

To edit your instance,

select it to open the details page,
then click on Edit at the top of the details page.

Step 2: add disk to configuration.

In the editor window, scroll down to the disk section.

Here you can either create and add a new disk or, as shown in the image above, attach and existing disk by clicking on Attach existing disk.

Select your disk in the drop-down menu.
Adjust the other parameters as needed.
Click on Done to complete the configuration.

To save the changes, click on Save at the bottom of the editor window.

Detaching a Volume from an Instance

If the volume is not the root device of the instance, unmount the volume in the Charon host system before detaching it (see Charon-SSP Manager section below).

Then detach the volume from your instance:

Open the editor for instance.
Go to the disk section.
Select the wastebasket symbol next to the disk.
Save the changes by clicking on Save at the bottom of the editor page.

Steps on the Charon-SSP Host System

Mounting a Newly Attached Volume Using the Storage Manager (Marketplace images only)

After the volume has been attached to the instance, it must be included in the Charon-SSP host system configuration. This is achieved via the Charon-SSP Manager.

Open the Charon-SSP Manager on your local system and connect to your Charon cloud instance.
Select Tools > Google Cloud > Storage Manager.
In the Storage Manager window, perform the following steps:
1. Select the new device.
2. Click on the cog-wheel symbol.
3. Only if required, select Format Volume to create a filesystem on the new device.
  Please note: This will delete all data on the volume.
4. Click on the cog-wheel symbol and select Mount the Filesystem.

This will mount the new volume under /charon/storage/media/<UUID>/. The following image shows a sample:

Once the filesystem has been mounted, the space is available to the Charon-SSP host system. After the first mount via the Storage Manager, the filesystem will be automatically mounted after a restart of the Charon host instance.

Mounting a Newly Attached Volume Manually

This is an example of how to mount (and if necessary format) an additional disk on the Charon host system. Please refer to the Linux manual pages for details.

The general tasks on the Charon host system require to identify the disk, add a file system to it (if this has not been done before), and mount the disk under a suitable mount-point.

Step 1: Identify new disk

After logging in on the system, you can identify the new disk using the lsblk command:

# lsblk
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda      8:0    0   20G  0 disk 
├─sda1   8:1    0  200M  0 part /boot/efi
└─sda2   8:2    0 19,8G  0 part /
sdb      8:16   0  200G  0 disk

In the example above, the new disk is /dev/sdb.

Step 2: Partition disk (fdisk or parted)

Please note: This step is only required for new disks. It will delete all data on an existing disk.

Please refer to the manual pages of your Linux distribution for details on the disk-partitioning commands.

After creating one partition on disk with fdisk (fdisk /dev/sdb), the lsblk output shows the new partition:

# lsblk
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda      8:0    0   30G  0 disk
├─sda1   8:1    0  500M  0 part /boot
└─sda2   8:2    0 29,5G  0 part /
sdb      8:32   0   64G  0 disk
└─sdb1   8:33   0   64G  0 part

Step3: Create a filesystem on the new partition(s)

Use the mkfs command to create a new filesystem. For example, to create an XFS filesystem, use

# mkfs.xfs /dev/sdb1

Please refer to the documentation of your Linux distribution for details about the mkfs command.

Step 4: Create a mount-point and mount the new filesystem

The following example shows how to create a mount-point and mount the file system. Please note that this is just a basic example. As the /dev/sdX device names are not guaranteed to be persistent, it is better to use names from the /dev/disk/by-* hierarchy (for example by-uuid) for permanent use.

# mkdir /space# mount /dev/sdb1 /space

The df command shows the mounted filesystem:

# df
Filesystem     1K-blocks    Used Available Use% Mounted on
devtmpfs         4065684       0   4065684   0% /dev
tmpfs            4077556      16   4077540   1% /dev/shm
tmpfs            4077556    9224   4068332   1% /run
tmpfs            4077556       0   4077556   0% /sys/fs/cgroup
/dev/sda2       30929148 1677416  29251732   6% /
/dev/sda1         508580   65512    443068  13% /boot
tmpfs             815512       0    815512   0% /run/user/1000
/dev/sdb1       65923628   53272  62498580   1% /space

Please note: To mount the filesystem at boot, add it to /etc/fstab.

Unmounting a Volume

To unmount a volume before perform the following steps:

Stop all Charon instances that might use the volume that is about to be unmounted.
On host systems based on Marketplace images:
- in Charon Manager go to Tools > Google Cloud > Storage Manager.
- Select the volume.
- Click on the cogwheel symbol and select Unmount the Filesystem.
On other systems:
- Use the command # umount <device-path> or # umount <mount-point>
- To make this permanent, remove the corresponding entry in /etc/fstab.

Storage Management

Contents