Problem
BELOW IS TO BE CONFIRMED: in which situation do we have to perform these operations ?
Systems running Tru64 V4.0x on Charon-AXP V4.7 Build 171-xx could fail to boot with "panic (cpu 0): System does not have a console configured
" message when upgraded to Charon-AXP V4.9 before Build 194-08 (patch).
Example:
...
... |
Solution
BELOW IS TO BE CONFIRMED: does 194-08 solve the problem ?
If patch 194-08 cannot be installed immediately, boot with genvmunix and update the kernel configuration file as described below:
P00>>>boot dka0 -file genvmunix |
Switch to multi-user if necessary by pressing CTRL-D and locate the configuration file (examples given below assume the configuration name is AXP001):
... |
In the example below, given for an AlphaServer 4100, we can see the controller ace0
has an invalid slot number for pci0
(eisa0
) according to the Placement of peripheral devices on PCI bus for AlphaServer4100 (8 PCI slots) table (slot 4 belongs to pci1
):
...
... |
BELOW IS TO BE CONFIRMED: any valid slot number can be used or the highest free one ?
We'll replace then slot 4
by a free slot in pci0 to correct this (according to the table mentioned above, slot 8
is free):
...
... |
so the result will be:
...
... |
The kernel can now be rebuilt, replaced and the system can be rebooted:
|
Example
Click here to see attached document.
Related articles
-
Placement of peripheral devices on PCI bus (CHARON-AXP V4.9 for Windows)
-
Placement of peripheral devices on PCI bus (CHARON-AXP V4.9 for Linux)