Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Problem

On installation of Software License "hasp_srw_view" utility cannot retrieve the host fingerprint C2V file: "Can not retrive the C2V (host fingerprint mode) data."

Solution

This problem happens because the "hasp_srw_view" utility may be confused by already installed network-wide Software Licenses. The solution is to disable access to remote licenses using "Sentinel HASP Admin Control Center" (ACC).

To disable access to network-wide licenses:
  1. Go to http://localhost:1947 to access the "Sentinel HASP Admin Control Center" (ACC).
  2. Select "Configuration" option at the left panel, then "Access to Remote License Managers" tab.
  3. Uncheck the highlighted options:
  4. Press "Submit" button to apply settings
  5. Select "Network" tab.
  6. Switch "Network visibility" to "None":
  7. Press "Submit" button to apply setting.
  8. Do not forget to return these settings back after SL installation.

Filter by label

There are no items with the selected labels at this time.

Readers/approval


<Go to Top>

  • No labels


© Stromasys, 1999-2024  - All the information is provided on the best effort basis, and might be changed anytime without notice. Information provided does not mean Stromasys commitment to any features described.