#
# Copyright (C) 1999-2014 STROMASYS
# All rights reserved.
#
# The software contained on this media is proprietary to and embodies
# the confidential technology of STROMASYS. Posession, use, duplication,
# or dissemination of the software and media is authorized only pursuant
# to a valid written license from STROMASYS.
#
#============================================================================
#
# Sample configuration file for PDP-11/93 machines.
#
#----------------------------------------------------------------------------
set session hw_model = PDP1193
#============================================================================
#
# Select name of the instance to differentiate it among other instances
# runnig on the same host.
#
#----------------------------------------------------------------------------
#set session configuration_name = PDP1193
#============================================================================
#
# Disable rotating LOG and enable single file LOG. Select either appending or
# overwriting it on every instance start. Then specify desired log file name
# and path to it.
#
#----------------------------------------------------------------------------
#set session log_method = append
#set session log_method = overwrite
#set session log = PDP1193.log
set toy container = "pdp1193.dat"
#
# Specify KW11-L timer frequency here (default is 50). Note, that appropriate
# disk image supports appropriate frequency because system clock
# frequency is the system configuration parameter.
#
#set KW11 frequency = 50
#set KW11 frequency = 60
#============================================================================
#
# Select connection for the console serial line TT0.
#
#----------------------------------------------------------------------------
#load physical_serial_line TT0 line = "\\.\COM<N>"
#load virtual_serial_line TT0 port = 10003
load virtual_serial_line TT0 port = 10003 application = "putty -load TT0 -P 10003"
set UART line = TT0
#============================================================================
#
# Uncomment to enable emulation of RQDX3 disk controller.
#
#----------------------------------------------------------------------------
#load RQDX3 DU
#============================================================================
#
# Uncomment to connect the emulator's DU0 to the disk image.
#
#----------------------------------------------------------------------------
#set DU container[0] = "<file-name>.vdisk"
#============================================================================
#
# Uncomment to connect the emulator's DU1 to host's disk drive.
#
#----------------------------------------------------------------------------
#set DU container[1] = "\\.\PhysicalDrive0"
#set DU container[1] = "\\.\PhysicalDrive<N>"
#============================================================================
#
# Uncomment to connect the emulator's DU2 to host's CD/DVD-ROM drive or ISO
# disk image.
#
#----------------------------------------------------------------------------
#set DU container[2] = "\\.\CdRom0"
#set DU container[2] = "\\.\CdRom<N>"
#set DU container[2] = "<file-name>.iso"
#============================================================================
#
# Uncomment to connect the emulator's DU3 to host's 3.5" FDD.
#
# Either "A:" or "B:" may be used in container specification.
#
#----------------------------------------------------------------------------
#set DU container[3] = "\\.\A:"
#============================================================================
#
# Boot from DU0 MSCP disk.
#
#----------------------------------------------------------------------------
#set cpu_0 auto_boot = "DU0"
#============================================================================
#
# Uncomment to enable emulation of TQK50 tape controller.
#
#----------------------------------------------------------------------------
#load TQK50 MU
#============================================================================
#
# Uncomment to connect the emulator's MU0 to the tape image.
#
#----------------------------------------------------------------------------
#set MU container[0] = "<file-name>.vtape"
#============================================================================
#
# Uncomment to connect the emulator's MU1 to host's tape drive.
#
#----------------------------------------------------------------------------
#set MU container[1] = "\\.\Tape0"
#set MU container[1] = "\\.\Tape<N>"
#============================================================================
#
# Load optional DEQNA QBUS Ethernet Adapter (QNA).
#
#----------------------------------------------------------------------------
#load DEQNA QNA interface = QNA0
#load packet_port QNA0 interface = (disabled)
#set QNA0 interface = "connection:<connection-name>"
# this is the end of the configuration file #################################
Back to Top