Versions Compared

Old Version 5

changes.mady.by.user Kirill Nikolaev (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Bruno Miretti

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: layout reviewed / PDF export

Anchor
TopMSCPPageTOCTopMSCPPage
TOC
Include Page
KBCOMMON:KB-CSSstyle
KBCOMMON:KB-CSSstyle

Table of Contents

Table of Contents
Table of Contents
exclude

...

Table of Contents

General description

PBXDA is a PCI serial lines adapter based on the AccelePort 2R 920, 4R 920, 8R 920 and Xem DIGI adapters.

...

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Loading PBXDA serial lines adapter

...

Info

All the parameters described in the "Placement of peripheral devices on PCI bus", such as "bus", "device", "function", "irq", "irq_bus" are applicable for PBXDA controller.


Div
classpagebreak



Note

DIGI drivers for OpenVMS and Tru64 are sensitive to PBXDA location on PCI, therefore it is recommended to fix PBXDA location with explcit configuration.

For example:

load PBXDA TXA bus=pci_1 device=4 function=0

...



Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Configuration parameters

The PBXDA serial lines adapter emulation has the following configuration parameters:

port

Parameterport
TypeText String
Value

Specifies a local port for incoming telnet connections

By default the "port" configuration option is not specified.

Syntax:

port[line-number]=<local port>

Example:

set TXA port[2]=17060


line

Parameterline
TypeText string
Value

A defined TTY port on host system:

SyntaxDescription
"/dev/tty<N>"Virtual serial lines
"/dev/ttyS<N>"Onboard serial lines
"/dev/ttyUSB<N>"Modem or USB serial lines adapters
"/dev/tty<XXX>"Proprietary (depending on a driver) devices such as DIGI or MOXA cards

Example:

set TXA line[2]="/dev/ttyS1"


Note

A specific account for running CHARON ("charon") does not allow usage of physical consoles "/dev/tty<N>" as CHARON consoles. If you plan to map CHARON console to "/dev/tty<N>" use only "root" account for CHARON running.

...


Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

"ttyY" notation specifics

Note that the "ttyY" notation can have different forms depending on the nature of the device used:

MappingTypeCommentary

"/dev/tty<N>"

where N is from 0 to 11

Linux virtual tty

Those tty devices must be free from the Linux "getty/mgetty" and similar programs (specified in "/etc/inittab")

Example:

"/dev/tty1"


"/dev/ttyS<N>"

where N is a number

Onboard serial lines

Example:

"/dev/ttyS1"


"/dev/tty<XXX>"

where XXX is a complex letter/number notation

Proprietary (depending on a driver) devices 

Example for a first port of a MOXA card:

"/dev/ttyR01"

Example for a first port of a DIGI card:

"/dev/ttyaa"


"/dev/ttyUSB<N>"

where N is a number

Modem or USB serial lines adapters

Example:

"/dev/ttyUSB1"

...


Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc