Page Comparison

...

Table of contents

Introduction

CHARON-VAX / CHARON-PDP products are distributed in form of a zip file that contains the CHARON-VAX / CHARON-PDP installation executable ("InstallShell.exe"). The InstallShell procedure offers the possibility to select several modules to install. It is recommended to install all modules (the default).

CHARON-VAX / CHARON-PDP installation consists of the following steps:

• Perform host system checks (hardware and software) to ensure the host platform meets minimum CHARON-VAX / CHARON-PDP installation requirements
• Optionally, create a specific CHARON username with administrative privileges
• Extract CHARON-VAX / CHARON-PDP installation procedure files from its archive
• Install CHARON-VAX / CHARON-PDP by running "InstallShell.exe" installer and following the instructions
• Install CHARON-VAX / CHARON-PDP license (hardware dongle or software license)
• Configure CHARON-VAX / CHARON-PDP host system, for example, network adapter, host OS services, etc.

Back to Table of Contents

...

Hardware Requirements

Number of CPU cores

Each CHARON-VAX / CHARON-PDP emulated CPU requires a corresponding physical core. So the total number of the host CPUs must exceed the number of emulated CPUs since some of the host CPUs must be dedicated to serving CHARON I/O operations and host operating system needs.

The following table shows the minimum and recommended number of CPUs required for VAX/PDP11 models:

...

CHARON-VAX / CHARON-PDP model

...

Minimal number of host CPU cores

...

Recommended number of host CPU cores

...

VAX 6610

...

2

...

4

...

VAX 6620

...

3

...

4

...

VAX 6630

...

4

...

6

...

VAX 6640

...

6

...

8

...

VAX 6650

...

8

...

12

...

VAX 6660

...

8

...

12

...

Table of contents

Introduction

CHARON-VAX / CHARON-PDP products are distributed in form of a zip file that contains the CHARON-VAX / CHARON-PDP installation executable ("InstallShell.exe"). The InstallShell procedure offers the possibility to select several modules to install. It is recommended to install all modules (the default).

CHARON-VAX / CHARON-PDP installation consists of the following steps:

• Perform host system checks (hardware and software) to ensure the host platform meets minimum CHARON-VAX / CHARON-PDP installation requirements
• Optionally, create a specific CHARON username with administrative privileges
• Extract CHARON-VAX / CHARON-PDP installation procedure files from its archive
• Install CHARON-VAX / CHARON-PDP by running "InstallShell.exe" installer and following the instructions
• Install CHARON-VAX / CHARON-PDP license (hardware dongle or software license)
• Configure CHARON-VAX / CHARON-PDP host system, for example, network adapter, host OS services, etc.

Back to Table of Contents

Hardware Requirements

Number of CPU cores

Each CHARON-VAX / CHARON-PDP emulated CPU requires a corresponding physical core. So the total number of the host CPUs must exceed the number of emulated CPUs since some of the host CPUs must be dedicated to serving CHARON I/O operations and host operating system needs.

The following table shows the minimum and recommended number of CPUs required for VAX/PDP11 models:

When starting, the CHARON-VAX software checks the available number of host CPU cores. Currently, this check is based on the maximum number of VAX CPUs that can be emulated, not on the number of the actually configured VAX CPUs. Therefore the number of host CPU cores recommended for the maximum number of emulated CPUs - as shown in the right column of the table above - must be available. If the available number of host CPU cores is below this number, CHARON-VAX will issue a warning message even if the requirements for the configured number of VAX CPUs are fulfilled. The CHARON-VAX software will work despite this warning if the requirements for the configured number of VAX CPUs are fulfilled.

...

Back to Table of Contents

Software Requirements

• Microsoft Windows Server 2016 Standard and Datacenter Editions, 64 bit version
• Microsoft Windows Server 2012 R2 Standard and Datacenter Editions, 64 bit version (please notice that only R2 revision is supported)
• Windows 10 Pro and Enterprise Editions,  64 32 bit and 64 bit version
• Microsoft Windows Server 2008 R2 (SP1)  Standard and Enterprise Editions, 64 bit version (please notice that only R2 revision is supported)
• Microsoft Windows 7 Professional and Ultimate (SP1) Editions, 32 bit and 64 bit versions
• Microsoft Windows 8.1 Professional Edition, 32 and 64 bit versions
• VMware ESXi 5.x and 5 and 6.x up to 6.0 5 (requires a supported Windows operating system on top of a ESXi virtual machine)
• Microsoft Hyper-V (requires a supported Windows operating system on top of a Hyper-V virtual machine)

Back to Table of Contents

Host system preparation

...

• On server side (where network license will reside): open port 1947 for both TCP and UDP
• On the client side, if broadcast search for remote licenses is to be used, UDP traffic from port 1947 of the license server to ports 30000-65535 of the client must be permitted.
  
• Both on server and client sides: setup default gateway

Please consult with your Windows User's Guide on Windows online documentation for details.

...

1. Type "regedit" in the search field under "Start" menu or press Windows+R and enter "regedit"; press Enter to run the found applet.

   Div
   class pagebreak

   
   

2. Find the "AlwaysDisableMCN" parameter in the following way:

   Div HKEY_LOCAL_MACHINE  + SYSTEM     + CurrentControlSet        + Enum           + SCSI              + Disk&Ven_DEC&Prod_RWZ53_____(C)DEC  <- This one depends on Vendor and Model of your MO drive                 + 5&fd233cf&0&000500 <- This one depends on hardware connection (SCSI ID of MO drive, location of SCSI HBA on the host's mainboard, etc ...)                    + Device Parameters                       + MediaChangeNotification                          + AlwaysDisableMCN = DWORD:00000000

    

3. Change the "AlwaysDisableMCN" parameter to "1", for example: "AlwaysDisableMCN = DWORD:00000001".
   
   
4. Reboot the host system.

Back to Table of Contents

Before installation

1. Login as the local system administrator ("Administrator") on the host system.

2. Create a special user for running CHARON-VAX / CHARON-PDP (optionallyoptional). This user must have all the administrative privileges. Please consult with your Windows User's Guide on Windows online documentation for details.

   Note

   For correct work of The CHARON the installation procedure will create a special group called CHARON-GRP and the current user will be automatically included to this group. Do not remove this group and do not extract remove any CHARON user from it, otherwise a problem with virtual memory allocation may appear on CHARON start startup. The created user may belong to some domain, but please note that in this case you have to add this user to the CHARON-GRP manually as it is described in this article and then reboot CHARON host.

   
   

3. Stay logged in as local system administrator ("Administrator") or log off and login as the CHARON-VAX / CHARON-PDP user having administrative privileges (if this option has been chosen).

4. Create a special directory for the CHARON-VAX / CHARON-PDP distribution kit and copy the provided files there.

5. Due to CHARON installation procedure update, it is required to uninstall all CHARON products before installing CHARON-VAX version 4.8

Back to Table of Contents

Distribution preparation

1. Extract the content of the distribution archive to the current directory or copy the content of the provided distribution directory to the current directory.

2. Run the "InstallShell.exe" file:
   

   Back to Table of Contents

Installation

...

The first dialog lists the CHARON-VAX / CHARON-PDP product in this particular distribution:

Select the required CHARON-VAX product, or all products, by checking the corresponding box.  Select Select the "Display components page" to include the products components page if you need it. Typically it is not required.

Press the "Next" button.

Read the license, check "Agree" if you agree and press the "Next" button.

If "Display components page" option was selected, the setup procedure will display a dialog for the CHARON-AXP VAX product components:

 It is strongly recommended to leave the selection as it is unless you clearly understand what the impact is if you uncheck some modules.

...

Select a directory to be used for CHARON installation or use the default. The path can either be entered manually or selected using the "Browse" button. Once done, press the "Next" button.

Once done, press the "Next" button to start the installation of the selected components.

During the CHARON installation procedure, you will have to confirm the installation of the CHARON-specific network driver. Press the "Install" button:

...

...

Once the installation is done, the following dialog will be displayed:

...

 It is strongly recommended to reboot the CHARON host system immediately: leave the "Reboot computer now" box checked and press the "Finish" button.

Once the host system is up again, you will notice a new shortcut, "CHARON Virtual Machine Machines Manager", created on the desktop during the installation procedure:

Clicking a shortcut will start The CHARON Virtual Machine Machines Manager which is an essential utility for CHARON management. CHARON installation always keeps most up-to-date version of CHARON Virtual Machine Machines Manager provided by all the installed kits.

...

...

The CHARON installation procedure has created the following structure under the "Start" menu:

Back to Table of Contents

...

Contents

CHARON-VAX / CHARON-PDP home directory

...

The "Virtual Machine Templates" directory contains template configuration files to build CHARON Virtual Machine with CHARON using the CHARON Virtual Machine Machines Manager.  We We will focus our attention on this subject in the next chapter.

Back to Table of Contents

License installation

Regular HASP USB dongle

If the CHARON license is contained stored on a regular USB dongle, just connect it to the host USB port.

Network HASP USB dongle

If the CHARON license is a network license (red USB dongle), it is possible either to connect it to the host USB port (to use it locally and provide it to other hosts on the local network at the same time) or to install it on a local network "license server" for remote access from this particular host.

If a remote license server is to be used:

• Copy the file "hasp_install\Sentinel_LDK_Run-time_cmd_line_X.XX.zip" from the CHARON distribution to any directory on the server, for example "C:\Temp".
• Extract the content of this archive to the same directory.
• Login as "Administrator" on the server and open "cmd.exe" from the "Start" menu.
• Switch to that directory.

• Install the extracted file.

  Divclasspagebreak

  
  

  Example:

  ...> cd c:\temp c:\temp> haspdinst.exe -fr -kp -nomsg c:\temp> haspdinst.exe -install -cm

  
  

...

Software license

If the CHARON license is a software license (SL), install it is installed on the host using the following procedure:

1. Double click the "CHARON Virtual Machine Machines Manager" icon on the desktop or select this utility in the tray menu; select the "Host Information and Utilities" section and press the "License Update Tool" button:
   
   

   Div
   class pagebreak

   
   The following default dialog window will appear:
   Image Removed
   Select following default dialog window will appear:
   
   Image Added
   
   

   Info
   If you're installing a "Provisional" (demo) license, jump to step 5

   
   

2. Ensure no license dongle is connected, select the "Installation of new protection key" radio-box and press the "Collect Information" button. The following window will appear:
   
    
   
   Specify the directory and name of the system "fingerprint" file to be created ; then press the "Save" button.

   Divclasspagebreak

   
   

3. The "License Update Service" will save the fingerprint file under the given name and report the status:
   
   
   
   
4. Send the resulting file to STROMASYS. In return STROMASYS will provide you with a "*.v2c" file, for example "Your License.v2c".
    

5. Copy the received v2c file to CHARON host in the folder of your choice and select the "Apply License File" tab:
   
   

   Div
   class pagebreak

   
   

6. Press the "..." button and browse for the received v2c file.
   Example:
   
   
   
   Press the "Open" button to apply the license. 
7. In From the "CHARON Virtual Machine Machines Manager" utility (see above) select the "Host Information and Utilities" section and press the "Sentinel Admin Control Center" button or (optionally) invoke the system default web browser and enter the URL http://localhost:1947 to display the "Sentinel Admin Control Center" (ACC) web interface. This interface allows you to view and manage the CHARON licenses.
8. Ensure that the software license is now visible in the "Sentinel Keys" menu section of the ACC.

Back to Table of Contents

License validity verification

Check the CHARON license validity . To do that, invoke by invoking the "Charon License Details" utility to make sure that the CHARON license is visible and is correct. Double click the "CHARON Virtual Machine Machines Manager" icon on the desktop or select this utility in the tray menu; select the "Host Information and Utilities" section and press the "HASP License Details" button:

• Text of Verify the the license content is displayed correctly by the "CHARON License Details" utility, and no error messages are message is shownContent
• Verify the content of the license looks correct.
For
• Check for example the license number, the major and minor versions, the minimum and maximum build numbers, the CHARON-
VAX / CHARON-PDP
• AXP products and allowed hardware (
CHARON-VAX /
• CHARON-
PDP
• AXP models)
should be checked
• . More details on the license content can be found in
the
• the CHARON-VAX / CHARON-PDP Licensing chapter of this Guide.

Troubleshooting

If the CHARON license content cannot be displayed by the "CHARON License Details" utility or it is incorrect, check that the license is available and correctly used:

1. In From the "CHARON Virtual Machine Machines Manager" utility (see above) select the "Host Information and Utilities" section and press the "Sentinel Admin Control Center" button or (optionally) invoke the system default web browser and enter the URL http://localhost:1947 to display the "Sentinel Admin Control Center" (ACC) web interface.
2. Click on the "Sentinel Keys" link to open up the "Sentinel Keys Section" page
3. Make sure that one and only one CHARON HASP or SL license is present.

Removing licenses can be done by physical disconnection of the corresponding USB HASP keys from the CHARON host and physical disconnection of the network HASP keys from all hosts on a local network (or by disabling remote access to network licenses from the CHARON host - see detailed explanation below).

Software licenses can also be uninstalled using the method, described in the "Removing CHARON-VAX Software Licenses" chapter of this Guide.

It is also possible to disable access to network licenses if just only a local license must is to be used: Click on open the Sentinel ACC and click on the "Configuration" link to open up the "Configuration for Sentinel Manager" page.

Uncheck the "Allow Access to Remote Licenses" and the "Broadcast Search for Remote Licenses" checkboxes from the "Access to Remote License Managers" tab , then press the "Submit" button to apply changes.

Back to Table of ContentsContents

Network configuration

In most cases, CHARON will use a network. If so, CHARON requires a dedicated network interface If the CHARON virtual machine needs access to the network, one or more dedicated network interfaces cleared from any other protocols including TCP/IP .

...

Network configuration will have to be defined.

Configuring the network is done with the "Network Control Center" (NCC) utility. Double click the "CHARON Virtual Machine Machines Manager" icon on the desktop or select this utility in the tray menu; select the "Host Information and Utilities" section and press the "Network Control Center" button:

Start the "Network Control Center" utility and

In the appearing dialog, select "Configure NIC" in the first dialog window:

Press the "Next" button. The , the following dialog will appear:

...

Select the interface to be dedicated to CHARON (in our example it is Realtek PCIe GBE Family Controller with a name named "Charon") and press the button "Dedicate adapter to CHARON" button.

...

After few seconds the chosen interface will be assigned to CHARON:

Note that it It is possible to release the interface back to the CHARON host . To do that, select by selecting the target interface and press pressing the "Release adapter to HOST" button.

...

The next step displays the text to be included in the CHARON configuration file for the interface dedicated to CHARON. Select the target interface and press the "Next" button. The following dialog will appear:

...

Restart the  "Network Control Center" utility again and select "Disable TCP chimney offload for CHARON":

Press the the "Next" button to apply the "offload" parameters settings.

Press the the "Cancel" button to exit from the "Network Control Center" utility.

When the NIC properties are configured in Windows, a reboot of the CHARON host is required for the changes, specifically "offload" parameters, to take effect.

Back to Table of Contents

After installation

If you plan to use local use the local system administrator account ("Administrator") or the CHARON-VAX / CHARON-PDP user having administrative privileges, no other actions are required.

Otherwise it is possible to use a standard account (both local and domain) for running CHARON-VAX / CHARON-PDP:

1. Login as the local system administrator ("Administrator") on the host system.

2. Create a special user for running CHARON-VAX / CHARON-PDP. This user must have administrative or standard privileges (in this case login as Administrator for manging NDIS drivers and running NCC utility). Please consult with your Windows User's Guide on Windows online documentation for details.

3. Add this user to the CHARON-GRP group as it is described in this article and then reboot CHARON host.

4. Login as the created user.

Back to Table of Contents