Page Comparison

...

The example below shows the serial console configuration of a Charon-SSP/4U and a Charon-SSP/4V system.

Charon-SSP/4U

Image Added

Charon-SSP/4V

Image Removed

Image Added

Image Removed

 Only one connection to the console is possible at one time. If the Charon Manager is connected via the integrated SSH tunnel and you try to open a second connection to the console (e.g., via a remote terminal emulation program), Charon Manager will terminate the second connection and re-establish the built-in console connection. If the Charon Manager is not running or not connected via the integrated SSH tunnel, a console connection can be established via a remote terminal program and the built-in console tab will be disconnected.

 If a second connection via Charon Manager is made to the same system, the current Charon-Manager connection is terminated.

Console Access via the Emulated Graphics Device (Charon-SSP/4M/4U(+) only)

...

to configure the graphics device correctly in the Solaris guest system.

After starting the emulated system, the graphics devices opens:

OPB console

Desktop after booting

Image Removed

Image Added

Image Modified

Please note:

The graphical performance depends on many parameters, for example, the performance of the host system, the emulated system, and the network. 
One important requirement is that the round-trip time of the network connection between display device and emulated Solaris system running on the AWS instance should be less or equal to 20ms. 
For every use case, a test is required to evaluate the suitability for the specific customer environment.

...

• For SSH: set PermitRootLogin yes in /etc/ssh/sshd_config to allow interactive login with passwords.
• For general login: comment out the CONSOLE=/dev/console line in /etc/default/login.

...

...