...
| Parameters available via the license manager | |
| Parameter | Description |
|---|---|
| Allow Remote Access to ACC | When selected, other network users can access the Sentinel Admin Control Center (ACC) and perform actions on this system. Unselected by default. The Sentinel ACC provides a web-based user interface for license management. If access is enabled, it can be accessed from a remote system via a browser (URL: <target-system>:1947). |
| Allow Access from Remote Clients | Selecting this check box will enable remote systems to access this Sentinel License Manager. This is needed if the system acts as a license server for clients on the network. |
| Allow Access to Remote Licenses | When selected, this system will search for remote Sentinel License Managers on the network. Needed, if the system is to use a license served by a license manager on the network. |
| Broadcast Search for Remote Licenses | When selected this system will search for remote Sentinel License Managers on the local network via broadcasts. Note that the broadcast uses a random UDP port from 30000 to 65535. Any firewall between the client and the server must be configured to allow these ports in addition to the TCP port 1947. If this is disabled, the addresses of systems to search must be defined in the search parameter field. Starting with version 4.0, the license viewer in Charon-SSP performs a broadcast search independent of this parameter. |
| Remote License Search Parameters | Defines the specific systems that will be searched by this system in order to detect remote Sentinel License Managers and licenses served by them. Systems are specified by their IP addresses (for example, 10.1.1.17), by the broadcast addresses of an address range (for example, 10.1.1.255), or by the system name (for example, system1.example.com). When using the IPv6 protocol, use the IPv6 address format. For example, type FF02::1 to access all remote Sentinel License Managers that are part of the default local group defined in the IPv6 subnet. |
...
The following example shows the configuration window:
Add the desired license IDs for the primary and backup key. To identify the license ID of all installed licenses on non-Baremetal installations, run the command:
...
Alternatively, use the license viewer tool in Charon-SSP Manager to display the licenses.
The field License server is reserved for future use. License server addresses for Charon 4.0 and earlier are configure via Tools > License tools > License Manager.
| Include Page | ||||
|---|---|---|---|---|
|