| Anchor | ||||
|---|---|---|---|---|
|
| Include Page | ||||
|---|---|---|---|---|
|
...
| Parameter | license_key_id | |
|---|---|---|
| Type | Text string | |
| Value | A set of Sentinel Key IDs that specifies the license keys to be used by CHARON. It is also possibly to use a keyword "any" to force CHARON to look for a suitable license in all available keys if the license is not found in the specified keys. Example:
Based on the presence of this parameter in the configuration file, CHARON behaves as follows:
If the keyword "any" is specified then if no valid license has been found in the keys with specified ID’s all other available keys are examined for valid license as well. The order in which keys are specified is very important. If a valid license was found in the key which ID was not the first one specified in configuration file, then available keys are periodically re-scanned and if the key with the ID earlier in the list than the current one is found CHARON tries to find a valid license there and in case of success switches to that key. |
| Div | ||
|---|---|---|
| ||
License installation
Installation of Regular and Network license keys
Installation of CHARON-VAX regular and network licenses consists of:
Installation of the Sentinel run-time environment on the CHARON-VAX host (regular and network keys) or on the host that will distribute CHARON-VAX licenses over a local network segment (network key only). The Sentinel software (the “aksusbd” RPM package) is installed automatically by CHARON-VAX for Linux.
Physical connection of the HASP license dongle to the CHARON-VAX host or to the host distributing the CHARON-VAX license over the local network segment.
When manual installation of Sentinel run-time is required (in the case of the network license server that does not have CHARON-VAX installed), open the CHARON-VAX kit folder and proceed the following way:
|
| Info | |
|---|---|
In case of network-wide license (red dongle) do the following:
Please consult with your Linux User's Guide on details. If stricter firewall rules are required, it is possible to open the ports 30000-65535 and 1947 only for the "/usr/sbin/hasplmd" daemon. | |
| Div | |
| class | pagebreak
| Info |
|---|
Some additional packages may be needed in certain cases, for example "glibc.i686" |
| Include Page | ||||
|---|---|---|---|---|
|
...
Replacement of currently installed Sentinel run-time
Replacement of currently installed Sentinel Run-time may be needed in case of:
- Upgrade to a newer version of CHARON-VAX
- Installation of a specific CHARON-VAX license Run-time provided by STROMASYS
Remove the current run-time (and the package "charon-license-<...>.rpm" containing the run-time customization) with the command
# rpm --nodeps -e aksusbd charon-license-<...>Change to the directory where the new run-time RPM resides (along with the corresponding "charon-license-<...>.rpm" customization package) and issue the command:
# rpm --nodeps -ihv aksusbd<…>.rpm charon-license-<...>.rpm
| Div | ||
|---|---|---|
| ||
Installation and update of CHARON-VAX Software License or HL/HASP dongle License
CHARON-VAX Software Licenses (SL) can be installed / updated according to the procedure described below.
Install CHARON-VAX together with Sentinel run-time (Sentinel run-time is an essential part of CHARON-VAX for Linux distribution)
Reboot the host system
- Connect the HASP dongle to the host system (in case of update of a license in a dongle)
Collect the CHARON-VAX host fingerprint file (".c2v") - in case of first installation of a Software License:
# hasp_srm_view -fgp my_host.c2vor collect the ".c2v" file in case a Software License is already installed or the connected HL/HASP dongle needs updating:
# hasp_srm_view -c2v current_license.c2vSend the ".c2v" file ("my_host.c2v" / "current_license.c2v" in the examples above) to STROMASYS
Receive a ".v2c" file in return and put it somewhere on the CHARON-VAX host.
Start any web browser on this system and go to http://localhost:1947 to access the "Sentinel HASP Admin Control Center" (ACC) or configure ACC for remote access (see the details below).
In ACC, under the Options menu, select Update/Attach, "" for the "*.v2c" file and then "".
Ensure that the license appears in the “” menu.
| Info |
|---|
Alternatively it is also possible to use the "hasp_update" utility for applying ".v2c" file. |
| Info |
|---|
The content of the installed software license is not shown by the Sentinel HASP Admin Control Center.To see it please run the "hasp_srm_view" utility from the local console or configure remote access according to the instructions given in the "hasp_srm_view" utility section. |
| Info |
|---|
In case of network-wide software license do the following:
Please consult with your Linux User's Guide on details. If stricter firewall rules are required, it is possible to open the ports 30000-65535 and 1947 only for the "/usr/sbin/hasplmd" daemon. |
| Include Page | ||||
|---|---|---|---|---|
|
License management
CHARON-VAX license management is performed by the Sentinel Admin Control Center and specific utilities. They are described in the sub-sections below.Sentinel Admin Control Center
...
The screenshot below gives an example:
This example demonstrates that 4 license keys are available:
A network key ("HASP-HL NetTime") on the host "XEON4WAYW7"
A network key installed locally
An HASP-HL installed locally
A network-wide software license on the host "RH64"
The Sentinel Admin Control Center reports that there is one opened session on key #4. The other keys are not being used at the moment.
Using the Sentinel Admin Control Center it is possible to check the available keys, verify the hosts on which they reside, verify the opened sessions, etc. For a more detailed description of the Sentinel Admin Control Center, please refer to its "Help" section.
| Include Page | ||||
|---|---|---|---|---|
|
Disable remote keys access
A helpful feature of the Sentinel Admin Control Center is the ability to disable access to remote keys. If the network key is installed locally, access to the key from remote hosts can be disabled. The following examples demonstrate how this can be done.
To disable access to remote keys, switch to the "Access to Remote License managers" tab, uncheck the "Allow Access to Remote Licenses" checkbox and press the "Submit" button to apply this setting:
To disable access to the locally installed license key from remote hosts, switch to the "Access from Remote Clients" tab, uncheck the "Allow Access from Remote Clients" checkbox and press the "Submit" button to apply this setting:
| Include Page | ||||
|---|---|---|---|---|
|
Accessing Sentinel Admin Control Center from remote hosts
By default, the Sentinel Admin Control Center forbids accessing its web interface from remote machines.
To allow access, configure the ACC for remote management:
In this cannot be done using the WEB interface, edit the "hasplm.ini" file:
|
In the file does not exist, please refer to this article: How-to enable remote connection to Sentinel Admin Control Center without GUI
Allow remote access by changing the "ACCremote" parameter from "0" to "1", make sure the parameter "bind_local_only" is set to 0 (the value 1 means localhost-only) then restart the Sentinel Admin Control Center run-time:
# |
(or for RHEL 6.x: # service aksusbd restart)
If the CHARON-VAX host firewall is blocking remote access to the Sentinel Admin Control Center, please configure the firewall to open the port 1947 (TCP protocol). Refer to the Linux documentation for details on how to configure the firewall. It is also possible to use SSH port forwarding with the following command (replace "CHARON_MACHINE" by the real CHARON-VAX host name):
# ssh -L8080:CHARON_MACHINE:1947 root@CHARON_MACHINE |
This will expose the Sentinel Admin Control Center on port 8080 to any computer and it will believe commands are coming from the local host.
| Include Page | ||||
|---|---|---|---|---|
|
License management utilities
CHARON-VAX for Linux provides a specific utility for license management - "hasp_srm_view". This utility is used to display the license(s) content, to collect key(s) status information and host fingerprint (C2V) files.
| Info |
|---|
Applying updates (".v2c" files) is typically done using the Sentinel Admin Control Center (see above) but alternatively it is also possible to use the specific "hasp_update" utility. |
Please refer to the Utilities section of this Guide for more details.
| Include Page | ||||
|---|---|---|---|---|
|
Removing CHARON-VAX software licenses
The following procedure must be applied to remove software license:
- Using your web browser, open the http://localhost:1947 page to access the "Sentinel HASP Admin Control Center" (ACC).
- In the "Sentinel HASP Admin Control Center" (ACC), locate the target "Sentinel SL AdminMode" license.
- Press the "Certificates" button at the right side of the SL description:
- Note the name of the corresponding certificate and path to the certificates base in the "Certificates" section.
- Remove the target certificate file from the specified directory, in most cases: "
/var/hasplm/installed/68704/". - Reboot the CHARON host.
- Start the "Sentinel HASP Admin Control Center" (ACC) again to ensure that the SL has been removed.
| Include Page | ||||
|---|---|---|---|---|
|
| Div | ||
|---|---|---|
| ||
License deinstallation
To completely remove a CHARON-VAX license from a host, it is enough to remove the Sentinel run-time daemon (and the package "charon-license-<...>.rpm" containing the run-time customization) using the following command:
# rpm --nodeps -e aksusbd charon-license-<...> |
Then just physically disconnect the license key (in the case of protection by dongles).
Special "backup" license keys
Backup keys are provided by STROMASYS along with standard license dongles. It is strongly recommended to order a backup key to recover immediately from damage or loss of the main license key. Backup keys use a counter (integer) value hardcoded inside the key. This integer value is a number of hours CHARON-VAX is allowed to run. Each time CHARON-VAX checks the license (every hour), the value is decreased (by 1 hour).Please note that backup keys have restricted functionality:
- CHARON run time is typically limited to 720 hours (30 days). This should be more than enough time to get a replacement from STROMASYS.
- A backup license may be valid only until a certain date. Please check with STROMASYS management.
| Include Page | ||||
|---|---|---|---|---|
|