Versions Compared

Old Version 11

changes.mady.by.user Kirill Nikolaev (Unlicensed)

Saved on

compared with

New Version 12

changes.mady.by.user Kirill Nikolaev (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

CommandDescription

fc rescan {/verbose} 

Scans connected SAN using FC adapters, discovers FC ports, storage controllers, logical units and then builds volatile FC database.

The "/verbose" qualifier enables FC communication trace on console (for diagnostic and troubleshooting).

fc show {adapter | port | device} 

Displays corresponding part of volatile FC database.

fc set {boot | dump} udid <X> 

Fills the environment variables wwid0..wwid3 and n1..n4 to identify path(s) to logical unit with the specified UDID.

These variables are later used by "INIT" to create device database entries and by OpenVMS/Tru64 to get access to boot and dump disks.

This command does NOT make any change to other environment variables.

fc set {boot | dump} wwid <X>

Fills the environment variables wwid0..wwid3 and n1..n4 to identify path(s) to logical unit with the specified WWID. 

These variables are later used by "INIT" to create device database entries and by OpenVMS/Tru64 to get access to boot and dump disks.

This command does NOT make any change to other environment variables.

This parameter is useful if UDID is absent.


Note

Only right part of the displayed WWID is used for specification, for example:

P00>>>fc res
polling for units on kgpsa0, slot 2, bus 0, hose 0 ...
    pga0.0.0.2.0                 PGA0          F/W Rev 2.72A2
                                               WWN 1000-0000-0263-0040
           fabric                              WWN 2003-0060-0263-0040
                directory                      WWN 20fc-0060-0263-0040
                port 020100                    CED 8GSH 0 F88V
                                               WWN 5000-1fe0-0000-0bf1
                  lun 0000000000000000         DEC HSG80CCL V88F
             UDID:-1                 WWID:01000010:6000-1fe0-0000-0bf0-3030-3030-373f-3f3f
                  lun 0000000000000100         COMPAQ RZ1ED 0000
             UDID:-1                 WWID:01000010:6000-1fe0-0000-0bf0-3030-3030-3030-3030
P00>>>fc set boot wwid 6000-1fe0-0000-0bf0-3030-3030-3030-3030


fc clear

Clears environment variables wwid0..wwid3 and n1..n4, which automatically disable (but do NOT delete) device database entries representing FC attached devices.

This command does NOT affect volatile FC database.

...