Versions Compared

Old Version 2

changes.mady.by.user Kirill Nikolaev

Saved on

compared with

New Version 3

changes.mady.by.user Kirill Nikolaev

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
TopMSCPPage
TopMSCPPage
Include Page
KBCOMMON:KB-CSSstyle
KBCOMMON:KB-CSSstyle

...

Loading PBXDA serial lines adapter

Syntax for loading PBXDA serial  (AccelePort 2r 920) serial lines adapter:

load AccelePort_2r920 PBXDA/DIGI <name>

Syntax for loading PBXDA_BA (AccelePort 4r 920)  serial lines adapter:

load AccelePort_4r920/DIGI = PBXDA_BA/DIGI <name>

Syntax for loading PBXDA_BB (AccelePort 8r 920) serial lines adapter:

load AccelePort_8r920/DIGI = PBXDA_BB/DIGI <name>

Syntax for loading PBXDA_AC (AccelePort Xem) serial lines adapter:

load AccelePort_Xem/DIGI = PBXDA_AC/DIGI <name>

Example:

load PBXDA/DIGI TXA

The adapter instance name ("TXA" in the example above) is used then for parametrization, for example:

...

The numbers in the square brackets represent line number on the virtual PBXDA adapter starting from 0.

Controller typeMaximum number of lines
PBXDA 2
PBXDA_BA4
PBXDA_BB8
PBXDA_AC16


Back to the Table of Contents

Configuration parameters

The PBXDA PCI SCSI  serial lines adapter emulation has the following configuration parameters:

line

Parameterscsi_idTypeNumericValue

Specifies SCSI ID of PBXDA PCI SCSI Adapter in a range 0..7

By default the "scsi_id" configuration parameter is set to 7.

Example

:

set PKA scsi_id=0

port

These parameters are used in SCSI cluster configurations.

DescriptionSpecifies local end-point (TCP/IP port on local host) of SCSI connection between this PBXDA PCI SCSI adapter and remote PBXDA PCI SCSI adapter on some host.

Specifies a local port for incoming telnet connections

By default the "host" and "port" configuration options are option is not specified.

Syntax:

Parameterhost, port
TypeText String
ValueParameter
hostSpecifies remote end-point (remote host name and, optionally, TCP/IP port on remote host) of SCSI connection between this PBXDA PCI SCSI adapter and remote PBXDA PCI SCSI adapter on some host.
port
port[connectionline-number]=<local port>host[connection-number]="<host-name{:tcpip-port-no}>"
where: connection_number = remote_scsi_id * 100 + lun_id

Example:

set PKA TXA port[6002]=17060 host[600]="localhost:16070"
Anchorcontainercontainercontainer
Parameter

container[N]

N is "XXYY" number, where:

  • XX - SCSI ID (0..15)
    • YY - LUN (00..07)


    line

    Possible values of the parameter are strings in one of the following forms:

  • Physical disk
    • "/dev/sd<L>" where "L" is letter, for example "/dev/sdb"
    • "/dev/disk/by-id/..." - addressing by the disk ID, for example "/dev/disk/by-id/ata-ST1000DM003-9YN162_S1D01QJ4"
    • "/dev/disk/by-label/..." - addressing by the disk label, for example "/dev/disk/by-label/MyStorage"

    • "/dev/disk/by-uuid/..." - addressing by the disk UUID, for example "/dev/disk/by-uuid/0e808a2f-cdd3-4944-a245-f729ffd73882"
      (warning) Please note that existing data on such a disk may be destroyed, depending on how it is used in the emulator.

    • Parameterline
    TypeText StringValue
    Note

    "/dev/sd<L>" addressing is not persistent, so it is strongly recommended to use "/dev/disk/by-id/wwn-*" syntax instead to refer the disk by its WWID - especially in the enviroments utilizing FC and SAN storages.

     These disks must not be formatted by the host OS.

    Example:

    set PKA container[0]="/dev/disk/by-id/ata-ST1000DM003-9YN162_S1D01QJ4"

    It is also possible to use not a whole disk, but previously created partitions on it. In this case the syntax is the following: "/dev/sd<L><N>" where N is the number of partition to be used. 

    Example:

    set PKA container[0]="/dev/sdc1"

    .

  • Multipath disk
    • "/dev/dm-<N>" 
    • "/dev/mapper/mpath<N>" 
    • "/dev/mapper/disk<N>" 
      (warning) Be careful not to destroy all the information from the disk dedicated to CHARON-AXP by mistake.  

      These disks must not be formatted by the host OS.

      Example:

      set PKA container[100]="/dev/dm-0"

      .

    • Loop (virtual block) devices

    "/dev/loop<N>"
    Example:

    set PKA container[200]="/dev/loop0"
  • Direct mapping to some SCSI device, for example, a SCSI disk, tape reader or tape changer

    • "/dev/sg<N>"
      Example:

      set PKA container[300]="/dev/sg0"

      .

  • CD-ROM device
    • "/dev/sr<N>"
    • "/dev/cdrom" 

    • "/dev/cdrom<N>"
      Example:

      set PKA container[400]="/dev/sr0"

      .

  • ISO file for reading distribution CD-ROM image
    • [<drive>":\"<path-name>"\"]<file-name>[".iso"]
       Mapping may also include the full path (recommended), for example: "/my_disks/vms_distributive.iso"

      Example:

      set PKA container[600]="/my_disks/vms_distributive.iso"

      .

    • File representing a physical disk of the HP Alpha system (disk image)
    • [<drive>":\"<path-name>"\"]<file-name>[".vdisk"]
      These files can be created from scratch with "mkdskcmd" utility. Data and OS disk backups are transferred from the original system via tapes or network and restored into these container files.   

      Mapping may also include the full path, for example: "/my_disks/my_boot_disk.vdisk"

      Example:

      set PKA container[401]="my_dka401.vdisk"

      .

    File representing the tape (tape image)[<drive>":\"<path-name>"\"]<file-name>".vtape"

    These files are created automatically. 

    Mapping may also include a full path (recommended), for example: "/my_tapes/backup.vtape" 

    Warning

    If the "CHARON Guest Utilities for OpenVMS" (CHARONCP) package is used there is a possibility not to specify the exact tape container on CHARON start since it can be specified later using the package.

    In this case the syntax is:

    set PKA container[500]=".vtape"

    Example:

    set PKA container[500]="my_mka500.vtape"

    How the Emulator Maps Guest-OS Operations to the Virtual Tape Drive

    Guest-OS operationsEmulator Action
    Open device for readingCreate a container file if none exists. open for reading and lock container file
    Open device for writingCreate a container file if necessary; open for writing and lock the container file
    Unload (eject) tape from driveClose a container file if open and unlock it - this allows copy/move/delete operations on CHARON host
    Info

    The container file associated with a virtual tape drive can be compared to the tape cartridge used in a physical tape drive. Both store the data written to the tape device by the guest OS.

    The size of virtual tape container files is limited only by space available in the emulator host file system.

    (warning) Prerequisite to the examples below: a virtual tape device has been configured in the CHARON configuration file and it is not in use by the guest OS.

    To perform backup:

    1. The tape device may be issued the "unload" command and the container-file moved/deleted to insure proper status 
    2. Initialize the tape device using standard guest OS procedure.
    3. Perform backup.
    4. Issue "unload" command to the tape device in the guest OS.
    5. On the emulator host, move the *.vtape container file containing backup data for storage or further backup.

    To restore from a backup:

  • The tape device may be issued the "unload" command to insure proper status.
  • On the emulator host, move or copy a *.vtape container file containing backup data onto the filename specified in the CHARON configuration file.
  • Perform restore.
  • Issue the "unload" command to the tape device in the guest OS.
    • Delete or move the container file in preparation for the next vtape operation.
    Warning

    CHARON does not support muti-volume backup for tape images. If some mutli-volume set (in form of tape images) has to be restored it is recommended to configure several tape drives in CHARON configuration file, assign each tape image to each tape drive and use them in the following way (OpenVMS example):

    $ BACKUP MKA100:BACKUP.BCK,MKA200,MKA300,MKA4000/SAVE_SET DKA0:...

    This parameter is initially not set, thus creating NO storage elements on the controller.

    media_type

    Parameter

    media_type[N]

    N is "XXYY" number, where:

    • XX - SCSI ID (0..15)
    • YY - LUN (00..07)
    Type

    Text String

    Value

    Instructs CHARON-AXP to use the supplied value as the PRODUCT field in the SCSI INQUIRY data returned to a software running on virtual HP Alpha system in response to SCSI INQUIRY command.

    If not specified, CHARON-AXP attempts to guess the SCSI INQUIRY data based on virtual SCSI device type and underlying container (which is specified in the corresponding container configuration parameter).

    Initially is not specified.

    Example:

    set PKA media_type[0]="HSZ70"

    removable

    Parameter

    removable[N]

    N is "XXYY" number, where:

    • XX - SCSI ID (0..15)
    • YY - LUN (00..07)
    TypeBooleanValue

    When set to "true", the removable configuration parameter instructs CHARON-AXP to report the corresponding virtual SCSI device as removable.

    By default the removable configuration parameter is set to "false".

    Example:

    set PKA removable[400]=true

    (info) Note that virtual SCSI tapes and CD-ROM devices are always reported as removable regardless of the "removable" configuration parameter.

    geometry

    Parameter

    geometry[N]

    N is "XXYY" number, where:

    • XX - SCSI ID (0..15)
    • YY - LUN (00..07)
    Type

    Text String

    Value

    This formatted string value specifies the explicit geometry of the disk storage element. This parameter is not applicable to tape storage elements.

    The string format is <X>”/”<Y>[“/”<Z>] or <X>”,”<Y>[“,”<Z>][“,”<B>] where:

    ParameterDescription
    XThe number of sectors per track
    YThe number of tracks per cylinder
    Z

    The number of cylinders on the unit.

    If omitted, Z is calculated based on X, Y and the total number of sectors on the unit that reflects the size of the disk storage element.

    This is an optional parameter.

    B

    The total size of the disk (in blocks) reported to the guest OS.

    If omitted it is calculated automatically.

    This is an optional parameter.

    If this parameter is not set, CHARON-AXP will configure the geometry based on the most probable disk type.

    Initially not set.

    Info

    It is possiblle to specify each parameter independently of another one. The following syntax is used for that:

    set PKA geometry[300]="*,*,*,16777210"

    The syntax described above is applicable only to disk storage elements. If the container is a tape image, the following format is used instead:

    Syntax:

    "<image-size>[, <early-warning-zone-size>]"

    where:

    ParameterDescription
    image-sizeThe tape size in MB
    early-warning-zone-size

    The size (in KB) of the space left on the tape when a warning to the OS is issued.

    If omitted, 64K is assumed.

    Example:

    set PKA geometry[603] = "255/255"

    use_io_file_buffering

    Parameter

    use_io_file_buffering[N]

    N is "XXYY" number, where:

    • XX - SCSI ID (0..15)
    • YY - LUN (00..07)
    TypeBooleanValue

    When set to "true", instructs CHARON-AXP to enable host operating system I/O cache on reading/writing operations.

    (info) Note that this caching has a significant effect only in case of mapping to disk and tape containers, not physcial drives. 

    When enabled, host operating system I/O cache may significantly improve I/O performance of the virtual system. At the same time maintaining I/O cache requires additional host resources (CPU and memory) which may negatively affect overall performance of the virtual system.

    Initially is set to "false".

    Example:

    set PKA use_io_file_buffering[603]=true

    io_queue_depth

    ...

    io_queue_depth[N]

    N is "XXYY" number, where:

    • XX - SCSI ID (0..15)
    • YY - LUN (00..07)

    ...

    Specifies PBXDA I/O requests (read or write) for a given unit in a range 2..128

    Setting this parameter enables PBXDA instance to run up-to the specifiied numbers of I/O requests (read or write) for unit N in parallel, thus improving the performance.

    The default value set by controller is optimal for most of the cases. It may be needed to enlarge this number if guest OS I/O queue for a certain unit contains too much pending entries. In this case the value should be equal to an average size of the queue, collected statistically.

    Please do not set this parameter without clear understanding the purpose.

    By default parallel execution of I/O requests is disabled.

    Example:

    set PKA io_queue_depth[603]=4

    min_n_of_threads

    ...

    min_n_of_threads

    ...

    Instructs PBXDA I/O to reserve a given number of working threads in a range 1..64, thus improving the performance.

    All units of PBXDA instance share the I/O threads.

    The default value is equal to number of units plus 2.

    For optimization it is possible to set this parameter to sum of the "io_queue_depth" parameters for each unit plus 2. This assumption seems optimal for most of the cases.

    Please do not set this parameter without clear understanding the purpose.

    Example:

    set PKA min_n_of_threads=16
    When a tape or disk image connected to an emulated PBXDA controller is dismounted by OpenVMS, it is disconnected from CHARON-AXP and can be manipulated. It can be replaced with a different disk image if it keeps the same name. This capability may be useful when designing back-up and restore procedures. When copying CHARON-AXP disk images while CHARON-AXP is running, please take care to minimize the risk of overloading a heavily loaded CHARON-AXP host system. For example, using a sequential series of simple ftp binary copies is less resource intensive and thus less disruptive than multiple, simultaneous copies.

    Empty disk images are created with the "mkdskcmd" utility. Tape images ("*.vtape") will be created automatically if they don't exist (no utility needed).

    CHARON-AXP is able to boot from disk images of any OpenVMS/Alpha and Tru64 version.

    ...

    The virtual PBXDA storage controller examines the file extension (vdisk or vtape) to distinguish between a disk image and a tape image.

    ...

    string
    Value

    A defined TTY port on host system:

    SyntaxDescription
    "/dev/tty<N>"Virtual serial lines
    "/dev/ttyS<N>"Onboard serial lines
    "/dev/ttyUSB<N>"Modem or USB serial lines adapters
    "/dev/tty<XXX>"Proprietary (depending on a driver) devices such as DIGI or MOXA cards

    Example:

    set TXA line[2]="/dev/tty1"


    Note

    A specific account for running CHARON ("charon") does not allow usage of physical consoles "/dev/tty<N>" as CHARON consoles. If you plan to map CHARON console to "/dev/tty<N>" use only "root" account for CHARON running.


    Back to the Table of Contents

    "ttyY" notation specifics

    Note that the "ttyY" notation can have different forms depending on the nature of the device used:

    MappingTypeCommentary

    "/dev/tty<N>"

    where N is from 0 to 11

    		Linux virtual tty

    Those tty devices must be free from the Linux "getty/mgetty" and similar programs (specified in "/etc/inittab")

    Example:

    "/dev/tty1"


    "/dev/ttyS<N>"

    where N is a number

    		Onboard serial lines

    Example:

    "/dev/ttyS1"


    "/dev/tty<XXX>"

    where XXX is a complex letter/number notation

    		Proprietary (depending on a driver) devices 

    Example for a first port of a MOXA card:

    "/dev/ttyR01"

    Example for a first port of a DIGI card:

    "/dev/ttyaa"


    "/dev/ttyUSB<N>"

    where N is a number

    		Modem or USB serial lines adapters

    Example:

    "/dev/ttyUSB1"


    Back to the Table of Contents