Product Documentation and Knowledge Base - HomeDocumentation


Charon-VAXCharon-AXPCharon-PDPCharon-SSPCharon-PAR
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Table of Contents

Back to Table of Contents

General Description

Each peripheral device of CHARON-AXP is connected to its emulated PCI bus with the following parameters:

ParameterTypeDescription
busText string

Value format: "pci_<N>"

When specified, the bus configuration parameter tells the CHARON-AXP software the virtual PCI bus to which virtual HP Alpha system shall connect a certain virtual PCI adapter.

By default the bus configuration parameter is not specified.

If the bus configuration parameter is not specified, CHARON-AXP software connects the virtual PCI adapter to the first available virtual PCI bus.

Example:

load KZPBA PKA bus=pci_1
deviceNumeric

When specified, the device configuration parameter specifies position of a virtual PCI adapter on virtual PCI bus.

By default the device configuration parameter is not specified.

If the device configuration parameter is not specified, the CHARON software connects the virtual PCI adapter at the first available position of the virtual PCI bus.

Example:

load KZPBA PKA device=2
   

Back to Table of Contents

  • No labels


© Stromasys, 1999-2024  - All the information is provided on the best effort basis, and might be changed anytime without notice. Information provided does not mean Stromasys commitment to any features described.