Placement of peripheral devices on PCI bus

Table of Contents

Back to Table of Contents

General Description

Each peripheral device of CHARON-AXP connects to CHARON-AXP emulated PCI bus with the following configuration parameters:

bus

device

function

irq_bus

irq

Note that typically all or some of those parameters are specified on loading of some PCI controller in the following way:

Back to Table of Contents

Available PCI slots per each HP Alpha model emulated by CHARON-AXP

The tables below specifies a map of preloaded devices and available slots for each HP Alpha models emulated by CHARON-AXP.

AlphaServer 400 (3 PCI slots)

In addition to 3 PCI vacant slots there are 2 PCI positions occupied by on-board devices. All 5 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for ISA IRQ Number because all interrupts are routed through the Intel i82378 PCI ISA Bridge (SATURN) resident cascade of Intel i8259 interrupt controllers.

So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.

 No support for Multi-Function PCI devices in AlphaServer 400.

Example: Loading DE435 into slot 0

 The "irq_bus=isa" setting is specific to AlphaServer 400 only.

Back to Table of Contents

AlphaServer 800 (4 PCI slots)

In addition to 4 PCI vacant slots there are 3 PCI positions occupied by on-board devices. All 7 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for input line of ASIC interrupt controllers. It has nothing to do with "EISA" style interrupts. So far, the CHARON-AXP emulators do not emulate S3 Trio32/64 Display Adapter. So position of the device 6, function 0 on the PCI 0 remains empty.

Example 1: Loading DE500BA into slot 0

Example 2: Loading multiple DE500BA’s into slot 3, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

 In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA.

Back to Table of Contents

AlphaServer 1000 (3 PCI slots)

In addition to 3 PCI vacant slots there are 2 PCI positions occupied by on-board devices. All 5 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for input line of ASIC interrupt controllers. It has nothing to do with "EISA" style interrupts. So far, the CHARON-AXP emulators do not emulate NCR 53C810 PCI SCSI adapter. Instead, emulation of QLOGIC ISP1040B PCI SCSI adapter is used.

Example 1: Loading DE500BA into slot 0

Example 2: Loading multiple DE500BA’s into slot 0, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 2, populating 2 functions out of 4

 In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA.

Back to Table of Contents

AlphaServer 1000A (7 PCI slots)

In addition to 7 PCI vacant slots there are 3 PCI positions occupied by on-board devices. All 10 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for input line of ASIC interrupt controllers. It has nothing to do with "EISA" style interrupts. So far, the CHARON-AXP emulators do not emulate NCR 53C810 PCI SCSI adapter. Instead, emulation of QLOGIC ISP1040B PCI SCSI adapter is used.

Example 1: Loading DE500BA into slot 0

Example 2: Loading multiple DE500BA’s into slot 0, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 3, populating 2 functions out of 4

 In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA.

Back to Table of Contents

AlphaServer 1200 (6 PCI slots)

In addition to 6 PCI vacant slots there are 2 PCI positions occupied by on-board devices. All 8 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

So far, the CHARON-AXP emulators do not emulate NCR 53C810 PCI SCSI adapter. Instead, emulation of QLOGIC ISP1040B PCI SCSI adapter is used.

Example 1: Loading DE500BA into slot 4

Example 2: Loading multiple DE500BA’s into slot 4, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

 In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA.

Back to Table of Contents

AlphaServer 2000 (3 PCI slots)

In addition to 3 PCI vacant slots there are 3 PCI positions occupied by on-board devices. All 6 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for input line of T2 resident cascade of Intel i8259 interrupt controllers. It has nothing to do with “EISA” style interrupts.

So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.

Example 1: Loading DE500BA into slot 0

Example 2: Loading multiple DE500BA’s into slot 0, populating all 4 functions (gives 4 Ethernet ports)

 In the above examples device name is EWB as there is a built-in EW-like PCI Ethernet Adapter located “closer” to CPU and therefore assigned name EWA.

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

 In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA, and device name is EWB as there is a built-in EW-like PCI Ethernet Adapter located “closer” to CPU and therefore assigned name EWA.

Back to Table of Contents

AlphaServer 2100 (3 PCI slots)

In addition to 3 PCI vacant slots there are 3 PCI positions occupied by on-board devices. All 6 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for input line of T2 resident cascade of Intel i8259 interrupt controllers. It has nothing to do with “EISA” style interrupts.

So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.

Example 1: Loading DE500BA into slot 0

Example 2: Loading multiple DE500BA’s into slot 0, populating all 4 functions (gives 4 Ethernet ports)

 In the above examples device name is EWB as there is a built-in EW-like PCI Ethernet Adapter located “closer” to CPU and therefore assigned name EWA.

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

 In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA, and device name is EWB as there is a built-in EW-like PCI Ethernet Adapter located “closer” to CPU and therefore assigned name EWA.

Back to Table of Contents

AlphaServer 4000 (16 PCI slots)

In addition to 16 PCI vacant slots there are 2 PCI positions occupied by on-board devices. All 18 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.

Example 1: Loading DE500BA into slot 4

Example 2: Loading multiple DE500BA’s into slot 4, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

 In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA.

Back to Table of Contents

AlphaServer 4100 (8 PCI slots)

In addition to 8 PCI vacant slots there are 2 PCI positions occupied by on-board devices. All 10 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.

Example 1: Loading DE500BA into slot 4

Example 2: Loading multiple DE500BA’s into slot 4, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

 In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA.

Back to Table of Contents

AlphaServer DS10 (4 PCI slots)

In addition to 4 PCI vacant slots there are 5 PCI positions occupied by on-board devices. All 9 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

Example 1: Loading DE500BA into slot 1

Example 2: Loading multiple DE500BA’s into slot 1, populating all 4 functions (gives 4 Ethernet ports)

 In the above examples device name is EWC as there are built-in EW-like PCI Ethernet Adapters located “closer” to CPU and therefore assigned names EWA and EWB.

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

  In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA, as there are two built-in EW-like PCI Ethernet Adapters located “closer” to CPU and therefore assigned names EWA and EWB.

Back to Table of Content

AlphaServer DS10L (1 PCI slot)

In addition to 1 PCI vacant slots there are 5 PCI positions occupied by on-board devices. All 6 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

Example 1: Loading DE500BA into slot 1

Example 2: Loading multiple DE500BA’s into slot 1, populating all 4 functions (gives 4 Ethernet ports)

 In the above examples device name is EWC as there are built-in EW-like PCI Ethernet Adapters located “closer” to CPU and therefore assigned names EWA and EWB.

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

  In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA, as there are two built-in EW-like PCI Ethernet Adapters located “closer” to CPU and therefore assigned names EWA and EWB

Back to Table of Content

AlphaServer DS15 (4 PCI slots)

In addition to 4 PCI vacant slots there are 7 PCI positions occupied by on-board devices. All 11 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for bit position in DRIR of TITAN chip. It has nothing to do with “ISA” style interrupts which are routed to IRQ 55 (including ALi M1543C PCI IDE/ATAPI controller).

So far the CHARON-AXP emulators do not emulate Adaptec AIC-7899. Instead, emulation of QLOGIC ISP1040B is used.

So far the CHARON-AXP emulators do not emulate Intel i82559. Instead, emulation of DECchip 21143 is used.

So far the CHARON-AXP emulators do not emulate ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty.

Example 1: Loading DE500BA into slot 1

Example 2: Loading multiple DE500BA’s into slot 2, populating all 4 functions (gives 4 Ethernet ports)

 In the above examples device name is EWC as there are built-in EW-like PCI Ethernet Adapters located “closer” to CPU and therefore assigned names EWA and EWB.

Example 3: Loading mixture of KZPBA and DE500BA into slot 3, populating 2 functions out of 4

  In the above example device name is PKC as there are 2 built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA and PKB, as there are two built-in EW-like PCI Ethernet Adapters located “closer” to CPU and therefore assigned names EWA and EWB

Back to Table of Content

AlphaServer DS20 (6 PCI slots)

In addition to 6 PCI vacant slots there are 5 PCI positions occupied by on-board devices. All 11 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for bit position in DRIR of Tsunami/Typhoon Chip. It has nothing to do with “ISA” style interrupts which are routed to IRQ 55 (including ALi M1543C PCI IDE/ATAPI controller).

Unless SCSI option is plugged into PCI slot 4, 5, or 6, the onboard SCSI controllers appear as PKA (pka7.0.0.6.0) and PKB (pkb7.0.0.106.0) respectively.

So far the CHARON-AXP emulators do not support virtual Adaptec AIC-7895 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.

So far the CHARON-AXP emulators do not support virtual ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty

Example 1: Loading DE500BA into slot 4

Example 2: Loading multiple DE500BA’s into slot 4, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

 In the above example device name is PKC as there are two built-in PK-like PCI SCSI Adapters located “closer” to CPU and therefore assigned names PKA and PKB.

Back to Table of Content

AlphaServer DS25 (6 PCI slots)

In addition to 6 PCI vacant slots there are 7 PCI positions occupied by on-board devices. All 13 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for bit position in DRIR of TITAN Chip. It has nothing to do with “ISA” style interrupts which are routed to IRQ 55 (including ALi M1543C PCI IDE/ATAPI controller).

So far the CHARON-AXP emulators do not emulate Intel i82559. Instead, emulation of DECchip 21143 is used.

So far the CHARON-AXP emulators do not emulate ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty.

Unless SCSI option is plugged into PCI slot 1, 2, 3, or 4, the onboard SCSI controllers appear as PKA (pka7.0.0.1.2) and PKB (pkb7.0.0.101.2) respectively.

So far the CHARON-AXP emulators do not emulate Adaptec AIC-7899. Instead, emulation of QLOGIC ISP1040B is used.

So far the CHARON-AXP emulators do not emulate BroadCom BCM5703. Instead, emulation of DECchip 21143 is used.

Example 1: Loading DE500BA into slot 5

Example 2: Loading multiple DE500BA’s into slot 5, populating all 4 functions (gives 4 Ethernet ports)

 In the above examples device name is EWC as there are built-in EW-like PCI Ethernet Adapters located “closer” to CPU and therefore assigned names EWA and EWB.

Example 3: Loading mixture of KZPBA and DE500BA into slot 6, populating 2 functions out of 4

  In the above example device name is PKB as there is a built-in PK-like PCI SCSI Adapter located “closer” to CPU and therefore assigned name PKA, as there are two built-in EW-like PCI Ethernet Adapters located “closer” to CPU and therefore assigned names EWA and EWB

Back to Table of Content

AlphaServer ES40 (10 PCI slots)

In addition to 10 PCI vacant slots there are 3 PCI positions occupied by on-board devices. All 13 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for bit position in DRIR of Tsunami/Typhoon chip. It has nothing to do with “ISA” style interrupts which are routed to IRQ 55 (including ALi M1543C PCI IDE/ATAPI controller).

So far the CHARON-AXP emulators do not support virtual ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty.

Example 1: Loading DE500BA into slot 5

Example 2: Loading multiple DE500BA’s into slot 5, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

Back to Table of Content

AlphaServer ES45 (10 PCI slots)

In addition to 10 PCI vacant slots there are 3 PCI positions occupied by on-board devices. All 13 PCI positions are listed in the following table in the order in which Alpha SRM console enumerates them.

The IRQ stands for bit position in DRIR of TITAN chip. It has nothing to do with “ISA” style interrupts which are routed to IRQ 55 (including ALi M1543C PCI IDE/ATAPI controller).

So far the CHARON-AXP emulators do not support virtual ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty.

Example 1: Loading DE500BA into slot 5

Example 2: Loading multiple DE500BA’s into slot 5, populating all 4 functions (gives 4 Ethernet ports)

Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4

Back to Table of Content

AlphaServer GS80 (8 PCI busses)

PCI 2 and 3 on each QBB are not populated.

So far the CHARON-AXP emulators do not support virtual ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty.

Total number of PCI devices configured through CFG file may not exceed 20.

Example: Loading DE500BA into slot 2 of QBB0.PCA0

Back to Table of Content

AlphaServer GS160 (16 PCI busses)

PCA 2 and 3 on each QBB are not populated in emulator.

So far the CHARON-AXP emulators do not emulate ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 on QBB 0 remains empty.

Total number of PCI devices configured through CFG file may not exceed 20.

Example: Loading DE500BA into slot 2 of QBB0.PCA0

Back to Table of Content

AlphaServer GS320 (32 PCI busses)

PCA 2 and 3 on each QBB are not populated in emulator.

So far the MSC/AXP emulators do not emulate ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 on QBB 0 remains empty.

Total number of PCI devices configured through CFG file may not exceed 20.

Example: Loading DE500BA into slot 2 of QBB0.PCA0

Back to Table of Content