Contents
Virtual Hardware Supported by Charon-PAR/PA9
The following table provides a short overview of the historic PA-RISC models emulated by the Charon-PAR software. For more details regarding each model, please refer to Emulated Model Hardware Configuration Details.
| Model | Maximum Memory | Number of CPUs |
|---|---|---|
| 64-bit models | ||
| A400 (1), rp2400 | 2GB | 1 |
| A400 (1), rp2430 | ||
| rp2405 | ||
| A500 (1), rp2450 | 8GB | 1 - 2 |
| A500 (1), rp2470 | ||
| rp2405 | ||
| rp5400 | 8GB | 1 -2 |
| rp5450 | 16GB | 1 - 4 |
| rp5430 | 8GB | 1 - 2 |
| rp5470 | 16GB | 1 - 4 |
rp3410 (from v3.0.5) | 6GB (2) | 1 dual-core (2) |
| rp3440 (from v3.0.5) | 32GB (2) | 1-2 dual-core (2) |
rp4410 (from v3.0.5) | 128GB (2) | 1-2 dual-core (2) |
| rp4440 (from v3.0.5) | 128GB (2) | 1-4 dual-core (2) |
| N4000 (1), rp7400 | 32GB (3) | 1 - 8 (3) |
| 32-bit models | ||
| 7000-720 | 265MB | 1 |
(1) N4000 models are historic PA-RISC models for MPE/iX. While they can run HP-UX, this is not recommended due to different Ethernet controller requirements between MPE and HP-UX.
(2) Oversized versions of the models may be available (up to 128 CPUs and 512GB of RAM). Please check availability with your Sales contact.
(3) Starting with version 3.0.5, oversized versions of the rp7400 may be available (up to 64 CPUs and 512GB of RAM). Please check availability with your Sales contact. The N4000 models can have 1-4, 6, or 8 emulated CPUs.
Virtual Hardware Supported by Charon-PAR/PA3
The following table provides a short overview of the historic PA-RISC models for MPE/iX supported by the Charon-PAR Software. For more details regarding each model, please refer to Emulated Model Hardware Configuration Details.
| Model | Maximum Memory | Number of CPUs |
|---|---|---|
| A400 | 2GB | 1 |
| A500 | 8GB | 1 - 2 |
| N4000 | 16GB | 1 - 4 |