Table of contents

Charon-PAR Model Names

PA-RISC Model Names Used by Charon-PAR/PA9

Charon-PAR/PA9-64 Details

The model names of Charon-PAR emulated historic PA-RISC systems for HP-UX consist of three parts:

<family-name>-<number-of-cpus>-<clock-speed>

Parameters:

• family-name describes the model family, e.g., rp2400,
• number-of-cpus describes the number of emulated CPUs, and
• clock-speed describes the CPU clock frequency in MHz.

Example:

rp2470-2-750 stands for an rp2470 model with two 750-MHz CPUs.

Abbreviations are possible, e.g,, rp2470-1 stands for an rp2470-1-750 model. See configuration file templates for permitted abbreviations.

PA9-32 Details

Currently, there is only one 32-bit model:

The PA9-32/720 (PA-RISC v1.1a) with single CPU at 50MHz, model string: "7000-720"

PA-RISC Model Names Used by Charon-PAR/PA3

The model names of Charon-PAR emulated historic PA-RISC systems for MPE/iX consist of three parts:

<family-name>-<number-of-cpus>-<clock-speed>

Parameters:

• family-name describes the model family, e.g., A400,
• number-of-cpus describes the number of emulated CPUs multiplied by 100, and
• clock-speed describes the CPU clock frequency in MHz.

Example: 

A400-100-110 is a single-CPU A400 system running at 110 MHz.

Device Addressing Terminology

In the following sections, an important part of the hardware configuration of an emulated model are the so called device paths.

A device path has the following structure: SBA/LBA/device-number/function[.target.LUN]. These components have the following meaning:

• SBA: system bus adapter
• LBA: local bus adapter
• Device number: identification of an individual device (e.g., and Ethernet card).
• Function: identification of a particular unit of functionality (e.g., one Ethernet port or one SCSI bus) on a specific device. There can be up to four functions per device.
• Target: optional further identification. Its use depends on the type of device connected. For example, a SCSI target ID.
• LUN: logical unit number of SCSI devices (e.g., disks and tapes). Used to address a logical unit associated with a SCSI target ID.

Examples:

• SBA 0, LBA 0, device number 1, function 0 results in a device path of 0/0/1/0
• SBA 0, LBA 2, device number 1, function 1 results in a device path of 0/2/1/1
• SBA 0, LBA 0, device number 1, function 0, SCSI target ID 1, LUN 0 results in a device path of 0/0/1/0.1.0

Charon-PAR/PA9-64 - Supported 64-bit Model Configurations

This chapter describes the hardware configuration of the supported emulated historic 64-bit PA-RISC models for HP-UX. This information will be referred to in other section, e.g., the configuration file reference.

A400 Model Family

A400 Family Overview

A400 Family Hardware Configuration

Models of the A400 family have 3 PCI buses.

Built-in controllers (all on PCI bus 0):

There are two additional PCI slots (currently not available for expansion):

A500 Model Family

A500 Family Overview

A500 Family Hardware Configuration

Models of the A500 family have 4 PCI buses.

Built-in controllers (all on PCI bus 0):

There are four additional PCI slots (currently not available for expansion):

L-Class and rp54xx Model Families

L-Class and rp54xx Families Overview

L1000 (rp5400) Hardware Configuration

L1000 systems have 8 PCI buses.

Built-in controllers (all on PCI bus 0):

Six PCI slots are available for expansion:

L2000 (rp5450) Hardware Configuration

Built-in controllers (all on PCI bus 0):

Six PCI slots are available for expansion:

L3000 (rp5470) Hardware Configuration

Built-in controllers (all on PCI bus 0):

Ten PCI slots are available for expansion:

N4000 (rp7400) Model Family

N4000 (rp7400) Family Overview

* Starting with version 3.0.5, the models above may also be available in “oversized” versions up to 64 CPUs and 512GB RAM. Please check the availability for your model with your Sales contact.

Starting with version 3.0.5, models with a CPU frequency of 750 MHz (model name in configuration: rp7400X-NN-750) will be able to make use of the extended TLB feature.

Twelve PCI slots are available for expansion:

rp34xx Family Hardware Configuration

The models of this family have 8 PCI buses. However, for Charon-PAR, 7 buses were implemented. All built-in controllers are on PCI bus 0.

Built-in controllers (all on PCI bus 0 of system bus adapter 0):

Six PCI slots are available for expansion:

rp44xx Family Hardware Configuration

The models of this family have 8 PCI buses. However, for Charon-PAR, 7 buses were implemented. All built-in controllers are on PCI bus 0.

Built-in controllers (all on PCI bus 0 of system bus adapter 0):

Six PCI slots are available for expansion:

Charon-PAR/PA9-32 - Supported 32-bit Model Configurations

This chapter describes the hardware configuration of the supported emulated historic 32-bit PA-RISC models for HP-UX. This information will be referred to in other section, e.g., the configuration file reference.

PA9-32/720 (7000-720)

PA9-32/720 Overview

Model name	No. of CPUs	Max. RAM in MB	CPU Freq. MHz	Configuration model name
HP 9000/720	1	265	50	720

PA9-32/720 Hardware Configuration

Built-in controllers:

Controller	Device path(s)	Controller character code (for SCSI device names)
Coral SGC Graphics (1)	1
Cobra Core BA	2
Cobra Core SCSI (controller model 53C700)	2/0/1	A = 2/0/1
Cobra Core LAN (802.3)	2/0/2
Cobra Core HIL (1) (connector for input devices)	2/0/3
Cobra Core RS-232	2/0/4
Cobra Core RS-232	2/0/5
Cobra Core Centronics (1)	2/0/6
Cobra (720)	8
Memory	9

⁽¹⁾ Not yet implemented.

This model has no expansion slots.

Charon-PAR/PA3 - Supported Model Configurations

This chapter describes the hardware configuration of the supported emulated historic PA-RISC models for MPE/iX. This information will be referred to in other section, e.g., the configuration file reference.

A400 Model Family

A400 Family Overview

Model name	No. of CPUs	Max. RAM in GB	CPU Freq. MHz	Configuration model name (for max. no. of CPUs)
A400	1	2	110 150	A400-100-110 A400-100-150

A400 Family Hardware Configuration

Models of the A400 family have 3 PCI buses.

Built-in controllers (all on PCI bus 0):

Controller	Device path(s)	Controller character code (for SCSI device names)
DEC 21143 Tulip 10/100 Mbit/s Ethernet controller	0/0/0/0
Dual SCSI-2 Controller (53C875)	0/0/1/0 and 0/0/1/1	A = 0/0/1/0 B = 0/0/1/1
Dual SCSI-3 LVD controller (53C896)	0/0/2/0 and 0/0/2/1	C = 0/0/2/0 D = 0/0/2/1
Diva serial PCI card with 2 available serial ports	0/0/4/0.0 and 0/0/4/0.1

There are two additional PCI slots (currently not available for expansion):

Slot number	Device path  (SBA/LBA/device)
1	0/2/0
2	0/4/0

A500 Model Family

A500 Family Overview

Model name	No. of CPUs	Max. RAM in GB	CPU Freq. MHz	Configuration model name (for max. no. of CPUs)
A500	1-2	8	140 200	A500-200-140 A500-200-200

A500 Family Hardware Configuration

Models of the A500 family have 4 PCI buses.

Built-in controllers (all on PCI bus 0):

Controller	Device path(s)	Controller character code (for SCSI device names)
DEC 21143 Tulip 10/100 Mbit/s Ethernet controller	0/0/0/0
Dual SCSI-2 Controller (53C875)	0/0/1/0 and 0/0/1/1	A = 0/0/1/0 B = 0/0/1/1
Dual SCSI-3 LVD controller (53C896)	0/0/2/0 and 0/0/2/1	C = 0/0/2/0 D = 0/0/2/1
Diva serial PCI card with 2 available serial ports	0/0/4/0.0 and 0/0/4/0.1

There are four additional PCI slots (currently not available for expansion):

Slot number	Device path  (SBA/LBA/device)
1	0/2/0
2	0/4/0
3	0/6/0
4	0/6/2

N4000 Model Family

N4000 Family Overview

Model name	No. of CPUs	Max. RAM in GB	CPU Freq. MHz	Configuration model name (for max. no. of CPUs)
N4000	1-4, 6, or 8	16	220 330 380 440 500 550 750	N4000-100-220 N4000-100-330 N4000-200-380 N4000-400-440 N4000-400-500 N4000-400-550 N4000-400-750

Starting with version 3.0.5, models with a CPU frequency of 750 MHz (model name in configuration: N4000X-NN-750) will be able to make use of the extended TLB feature.

N4000 Hardware Configuration

N4000 systems have 14 PCI buses.

Built-in controllers (all on PCI bus 0 of system bus adapter 0):

Controller	Device path(s)	Controller character code (for SCSI device names)
DEC 21143 Tulip 10/100 Mbit/s Ethernet controller	0/0/0/0
SCSI-2 Controller (53C875)	0/0/1/0 and 0/0/1/1	A = 0/0/1/0
Dual SCSI-3 LVD controller (53C896)	0/0/2/0 and 0/0/2/1	B = 0/0/2/0 C = 0/0/2/1
Diva serial PCI card with 2 available serial ports	0/0/4/0.0 and 0/0/4/0.1

Twelve PCI slots are available for expansion:

Slot number	Device path  (SBA/LBA/device)
1	0/5/0
2	0/4/0
3	0/12/0
4	0/8/0
5	0/10/0
6	0/2/0
7	1/12/0
8	1/10/0
9	1/4/0
10	1/2/0
11	1/8/0
12	1/0/0