Contents
Virtual Hardware Supported by Charon-PAR/PA9
The following table provides a short overview of the historic HP9000 models emulated by the Charon-PAR software. For more details regarding each model, please refer to Emulated Model Hardware Configuration Details.
| Model | Maximum Memory | Number of CPUs |
|---|---|---|
| 64-bit models | ||
| A400 (1), rp2400 | 2GB | 1 |
| A400 (1), rp2430 | ||
| rp2405 | ||
| A500 (1), rp2450 | 8GB | 1 - 2 |
| A500 (1), rp2470 | ||
| rp2405 | ||
| rp5400 | 8GB | 1 -2 |
| rp5450 | 16GB | 1 - 4 |
| rp5430 | 8GB | 1 - 2 |
| rp5470 | 16GB | 1 - 4 |
rp3410 (from v3.0.5) | 6GB (2) | 1 dual-core (2) |
| rp3440 (from v3.0.5) | 32GB (2) | 1-2 dual-core (2) |
rp4410 (from v3.0.5) | 128GB (2) | 1-2 dual-core (2) |
| rp4440 (from v3.0.5) | 128GB (2) | 1-4 dual-core (2) |
| N4000 (1), rp7400 | 32GB (3) | 1 - 8 (3) |
| 32-bit models | ||
| 7000-720 | 265MB | 1 |
(1) These models are historic HP3000 models. While they can run HP-UX, this is not recommended due to different Ethernet controller requirements between MPE and HP-UX.
(2) For the oversized version of the models, the maximum number of CPUs is 128, the maximum amount of memory is 512GB of RAM.
(3) For the oversized version of the models, the maximum number of CPUs is 64, the maximum amount of memory is 512GB of RAM.
Virtual Hardware Supported by Charon-PAR/PA3
The following table provides a short overview of the historic HP3000 models supported by the Charon-PAR Software. For more details regarding each model, please refer to Emulated Model Hardware Configuration Details.
| Model | Maximum Memory | Number of CPUs |
|---|---|---|
| A400 | 2GB | 1 |
| A500 | 8GB | 1 - 2 |
| N4000 | 16GB | 1 - 4 |