CHARON-AXP for Windows installation

Table of contents

Introduction

CHARON-AXP products are distributed in form of a zip file that contains the CHARON-AXP installation executable ("InstallShell.exe"). The InstallShell procedure offers the possibility to select several modules to install. It is recommended to install all modules (the default).

Before installing CHARON-AXP, please perform host system checks (hardware and software) to ensure the host platform meets minimum CHARON-AXP installation requirements

Optionally, create a specific CHARON username with administrative privileges

CHARON-AXP installation steps:

• Extract CHARON-AXP installation procedure files from its archive
• Install CHARON-AXP by running "InstallShell.exe" installer and follow the instructions
• Install CHARON-AXP license (hardware dongle or software license)
• Configure CHARON-AXP host system, for example, network adapter, disable some Windows features (see Host system preparation further), etc.

Back to Table of Contents

Hardware Requirements

Number of CPU cores

Each CHARON-AXP emulated CPU requires a corresponding physical core. So the total number of the host CPUs must exceed the number of emulated CPUs since some of the host CPUs must be dedicated to serving CHARON I/O operations and host operating system needs. If several CHARON instances run in parallel, the required number of CPU cores is summarized.

The following table shows the minimum and recommended number of CPUs required for each product for one instance (note that each product instance is able to run on 2 CPU cores hosts, but this configuration does not support emulation of all the virtual CPUs):

CPU type and speed

Since CHARON-AXP utilizes the LAHF instruction during HP Alpha CPU emulation, please avoid using early (pre-2005) AMD64 and Intel 64 CPUs in CHARON host system since they lack this capability. AMD Athlon 64, Opteron and Turion 64 revision D processors from March 2005 and Intel Pentium 4 G1 stepping from December 2005 are LAHF instruction capable.

Concerning CPU speed, the general recommendation is that higher CPU frequency is better since it allows better emulated HP Alpha performance. The minimal recommendation is at least 3 GHz.

Operative memory

The minimum host memory size depends on the amount of HP Alpha memory to be emulated and on the number of CHARON-AXP instances to be run on one host.
The minimum host memory is calculated according to the following formula:

The minimum host memory = (2Gb +  the amount of HP Alpha memory emulated) per CHARON-AXP instance.

Disk storage

The total amount of disk space required for CHARON-AXP can be calculated as a sum of all the disk/tape image sizes plus 50 MB for the CHARON software plus space required for the normal host OS.

Ethernet adapters

CHARON-AXP networking assumes dedicated host Ethernet adapters; their number must be equal to the emulated adapters to be configured in CHARON-AXP. One adapter (optionally) can be left to the host for TCP/IP networking etc.

Back to Table of Contents

Software Requirements

• Windows Server 2012 (R2) Standard Edition , 64 bit version
• Windows 8.1 Pro and Enterprise Editions, 64 bit versions
• Windows 7 Professional and Ultimate (SP1) Editions, 64 bit versions
• Windows Server 2008 R2 (SP1)  Standard and Enterprise Editions, 64 bit version

Back to Table of Contents

Host system preparation

In case a network-wide license (red dongle or software license) is going to be used, the following operations have to be performed:

• On server side (where network license will reside): open port 1947 for both TCP and UDP
• On clients side: open UDP ports 30000-65535
• Both on server and client sides: setup default gateway

Please consult with your Windows User's Guide on details.

Back to Table of Contents

Before installation

1. Login as the local system administrator ("Administrator") on the host system.

2. Optionally, create a special user for running CHARON-AXP. This user may have all the administrative privileges. Please consult with your Windows User's Guide on details.

   The created user must not belong to any domain. Only local users are allowed to run CHARON-AXP. It is possible to skip creating a specific CHARON-AXP account and use the local "Administrator" account instead for all CHARON activities.

3. Log off and login as CHARON-AXP user.

4. Create a special directory for the CHARON-AXP distribution kit and copy the provided files there.

   Back to Table of Contents

Distribution preparation

1. Extract the content of the distribution archive to the current directory or copy the content of the provided distribution directory to the current directory.

2. Run the "InstallShell.exe" file:
   

   Back to Table of Contents

Installation

The following description assumes this is the first installation of CHARON-AXP on the target host. Installation of additional CHARON products later follows the same procedure.

The first dialog lists the CHARON-AXP products in this particular distribution:

Select the required products or all products by checking the corresponding box.

Press the "Next" button.

Read the license, check "Agree" if you agree and press the "Next" button.

Select a directory to be used for CHARON installation or use the default. The path can either be entered manually or selected using the "Browse" button. Once done, press the "Next" button.

The CHARON installation procedure will install software packages required for CHARON-AXP, for example, Microsoft Visual C++ redistributives and Sentinel HASP Run-time:

Once the packages are installed, the setup procedure will display a dialog for the chosen CHARON product(s) components:

 It is strongly recommended to leave the selection as it is unless you clearly understand what you're doing if you uncheck some modules. Once done, press the "Next" button to start the installation of the selected components.

During the CHARON installation procedure, you will have to confirm the installation of the CHARON-specific network driver. Press the "Install" button:

Once the installation if done, the following dialog will be displayed:

 It is strongly recommended to reboot the CHARON host system immediately: leave the "Reboot computer now" box checked and press the "Finish" button.

Once the host system is up again, you will notice new shortcuts created on the desktop during the installation procedure. For example:

Once the CHARON-AXP license is installed normally (see below) and the configuration file has been modified to map devices, clicking a shortcut will start the corresponding model of HP Alpha emulator.

The CHARON installation procedure has created the following structure under the "Start" menu:

The programs in the "Utilities" subdirectory are discussed in detail, below.

Back to Table of Contents

CHARON-AXP home directory

By default CHARON-AXP is installed in the "C:\Program Files\CHARON" directory (it may also use "C:\Program Files (x86)\CHARON" directory if CHARON-AXP products have been installed on the host prior to CHARON-AXP). It has the following subdirectories:

The "Build_XXX\x64" directory contains template configuration files with examples of typical configuration parameters and commentaries. The template files are used to build the emulator instance. We will pay our attention to this subject in the next chapter.

Back to Table of Contents

License installation

Regular HASP USB dongle

If the CHARON license is contained on a regular USB dongle, just connect it to the host USB port.

Network HASP USB dongle

If the CHARON license is a network license (red USB dongle), it is possible either to connect it to the host USB port (to use it locally providing it to other hosts on local network at the same time) or to install it on some local network "server" for remote access from this particular host.

In case of remote usage:

• Copy "hasp_install\Sentinel_LDK_Run-time_cmd_line_X.XX.zip" file from CHARON distributive to the server in any directory, for example "C:\Temp"
• Extract the content of this archive to the same directory.
• Login as "Administrator" on the server and open "cmd.exe" from the "Start" menu.
• Switch to that directory

• Install the extracted file:
  Example:

  ...> cd c:\temp c:\temp> haspdinst.exe -fr -kp -nomsg c:\temp> haspdinst.exe -install -cm

• Connect the network HASP dongle to the server USB port.

Software license

If the CHARON license is a software license (SL), install it on the host using the following procedure:

1. Press the Start button, select "All programs", "Charon" then the Charon product/version folder, "Utilities" and execute the "License Update Service" program:
   
   
   
   The following default dialog window will appear:
   
   
   
   

2. Select the "Installation of new protection key" radio-box and press the "Collect Information" button. The following window will appear:
   
    
   
   Specify the directory and name of the system "fingerprint" file to be created; press "Save".
    
3. The "License Update Service" will save the fingerprint file under the given name and report the status:
   
   
   
   
4. Send the resulting file to STROMASYS. In return STROMASYS will provide you with a "*.v2c" file, for example "Your License.v2c"
    
5. Copy the received v2c file to CHARON host in the folder of your choice and select the "Apply License File" tab:
   
   
    
6. Press the "..." button and browse for the received v2c file.
   Example:
   
    
   
   Press "Open" to apply the license. 
    
7. Invoke the system default web browser and enter URL http://localhost:1947 to display "Sentinel Admin Control Center" (ACC) web interface. This interface allows you to view and manage CHARON licenses.
8. Ensure that the software license appears now in the "Sentinel Keys" menu of the ACC.

Back to Table of Contents

License validity verification

Check available CHARON license validity. To do that invoke the "HASP View" utility to make sure that CHARON license is visible and looks Ok:

• Text of the license is displayed correctly by the "HASP View" utility, no error messages are shown
• Content of the license looks correct. For example license number, major and minor versions, minimum and maximum build numbers, CHARON-AXP products and allowed hardware (CHARON-AXP models) should be checked. More details on the license content can be found in the CHARON-AXP Licensing chapter of this Guide.

Troubleshooting

If CHARON license content cannot be displayed by the "HASP View" utility or it is incorrect, check that the license is available and correctly used:

1. Invoke the system default web browser and enter URL http://localhost:1947 to display "Sentinel Admin Control Center" (ACC) web interface.
2. Click on "Sentinel Keys" link to open up "Sentinel Keys Section" page
3. Make sure that one and only one CHARON HASP or SL license is present.

If no license is displayed make sure that all the recommendations above about remote access to the host are fulfilled (if remote access is used), that the HASP USB key is not broken and its LED indicator is lit (meaning that it is used by the host).

If only one License key / SL is seen and its content is incorrect please contact STROMASYS as soon as possible.

If several License keys / SLs are displayed remove all of them and leave only the one provided by STROMASYS for the just installed version of CHARON.moving licenses can be done by physical disconnection of the corresponding USB HASP keys from CHARON host and physical disconnection of the network HASP keys from all hosts on a local network (or by disabling remote access to network licenses from CHARON host - see detailed explanations below). 

Software licenses can also be uninstalled with the "License Update Service" utility (see above) in the following way:

1. Open up the "Transfer License" tab of the utility.
2. Press the "..." button beside "Save recipient information to" message and save the system fingerprint to some directory.
3. Select the software license you are going to delete.
4. Press the "..." button belonging to "Read the recipient information file from" message and specify the fingreprint file you have just collected.
5. Press the "..." button belonging to "Generate the license transfer file to" message and enter a name for the license transfer file.
6. Press "Generate License Transfer File"
7. Now the chosen software license is removed from CHARON host

It is also possible to disable access to network licenses if just a local license must be used: Click on "Configuration" link to open up "Configuration for Sentinel Manager" page. Uncheck "Allow Access to Remote Licenses" and "Broadcast Search for Remote Licenses" checkboxes from the "Access to Remote License Managers" tab, then press the "Submit" button to apply changes.

Back to Table of Contents

Network configuration

In most cases, CHARON will use a network. If so, CHARON requires a dedicated network interface cleared from any other protocols including TCP/IP.

Network configuration is done with the help of the "Network Control Center" (NCC) utility:

Start the "Network Control Center" utility and select "Configure NIC" in the first dialog window:

Press the "Next" button. The following dialog will appear:

Select the interface to be dedicated to CHARON (in our example it is Realtek PCIe GBE Family Controller with a name "Charon") and press the button "Dedicate adapter to CHARON".

After few seconds the chosen interface will be assigned to CHARON:

Note that it is possible to release the interface back to the CHARON host. To do that, select the target interface and press the "Release adapter to HOST" button.

The next step displays text to be included in the CHARON configuration file for the interface dedicated to CHARON. Select the target interface and press the "Next" button. The following dialog will appear:

Selecting the target emulated network interface displays the configuration lines specific for the selected CHARON host network interface. Press the "Copy suggestions to clipboard" button to copy the suggested configuration lines. They can be pasted into the CHARON-AXP configuration file during the next editing session by pressing "Ctrl-V".

Press the "Cancel" button to exit from the "Network Control Center" utility.

Restart the  "Network Control Center" utility again and select "Disable TCP chimney offload for CHARON":

Press the "Next" button to apply the "offload" parameters settings.

Press the "Cancel" button to exit from the "Network Control Center" utility.

When the NIC properties are configured in Windows, a reboot of the CHARON host is required for the changes, specifically "offload" parameters, to take effect.

Back to Table of Contents