Product Documentation and Knowledge Base - HomeDocumentation


Charon-VAXCharon-AXPCharon-PDPCharon-SSPCharon-PAR
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Restart the system.
Syntax

reset

Description

This command restarts the SPARC virtual machine.

Example

The following example demonstrates the output of the reset command on CHARON-SSP/L10 configured as a SPARCstation 20.

Example reset Command Output

 

ok reset
reset
 
           SMCC SPARCstation 20 Emulator by Stromasys
 
 
CPU_#0       TI, TMS390Z50(3.x)       0Mb External cache
 
CPU_#1       ****** NOT installed ******
CPU_#1       ****** NOT installed ******
CPU_#1       ****** NOT installed ******
 
 
           >>>>> Power On Self Test (POST) is running .... <<<<<
 
SPARCstation 20 (1 X 390Z50), No Keyboard
Emulate OBP Rev. 2.25, 64 MB memory installed, Serial #12648430.
Ethernet address 2:c:29:4a:d3:29, Host ID: 72c0ffee.
 
 
Type  help  for more information
ok

  • No labels


© Stromasys, 1999-2024  - All the information is provided on the best effort basis, and might be changed anytime without notice. Information provided does not mean Stromasys commitment to any features described.