...

...

• Fixed a loss of date/time synchronization after DST change (ID#5029)

• Fixed a problem where VAX 4705 ROM self-test detects a fatal hardware error on the VAX virtual machine (ID#4958, Case #00029315)

• Fixed Reflection terminal emulator program error on closing Charon (ID#4623)

• Fixed an installation of Charon NDIS driver with Charon Network Control Center on Windows 2012 R2 and Windows 8.1 (ID#4687)

• Fixed a segmentation violation in SGEC module on Charon-VAX boot (DOW issue) (ID#4638)

• Fixed an incorrect handling of block data transfer via CI/DSSI cluster interconnect (ID#4648)

• Fixed an overflow of SST Queue Progress Counter (ID#4434, 4539)

• Fixed an exception (C0000005) at 10005324: Segmentation violation crash (ID#4481, 4540)

• Fixed various issues with Charon on the fly switching between primary and backup licenses of different types (local, network, software) (ID#4058, 4179, 4502, 4622)

• Adjusted a Charon network driver to function with HP Proliant G8 family built-in network adapters (LOM 1Gbe x 4) (ID#4354)

• Fixed Charon service startup issues if Putty console is configured as for foreground run (ID#4458)

• Fixed a crash during a reboot after performing Autogen (ID#4598)

• Fixed VAX/VMS 5.5-2 DSSI Cluster hang on boot (ID#4658)

• Fixed logging with RAM set to 8MB for MicroVAX configuration (ID#4699)

• Fixed an "F6" key handling for Charon-VAX running as a service (ID#4600)

• Fixed VAX SRM console test 19 failure on autoboot after Windows boot (ID#4528, 4672)

• Fixed Charon handling for Spare licenses (ID#4622)

• Fixed log monitoring service (LOGMOND) startup (ID#4634)

• Fixed Invalid message Charon Mail Report (ID#4700)

• Fixed a HASP_view utility crash on viewing expired NetTime license (ID#4702)

• Fixed a false warning from Installation procedure about changes to some files which had not been changed (ID#4523)

• Fixed InstallShell privileges for installation from non Administrator user (ID#4527)

• Fixed Network Control Center handling for virtual network adapters and network bridges (ID#4097, #4099)

• Fixed a VAX console hang if not enough I/O cores are set for VAX 66x0 (ID#4331)

• Fixed MSCP disks shown as DSSI in SRM console (ID#1840)

• Fixed VMS on VAX 66x0 presenting vtape container as a vdisk (ID#4352)

• Fixed an occasional time drift (ID#4341)

• Fixed VAX 66x0 crash due to segmentation violation (ID#4304)

• Fixed out of order network packets transmission if multiple network sessions are established with a single host (ID#4302)

• Fixed iSCSI disk sharing MV II and MV 3600 (ID#3054)

• Fixed a Putty console startup issue (ID#4193)

• Minor fixes to logging and utilities version information (ID#4214, 4349, 4388, 4425)

• Fixed Network Control Center reporting lack of privileges (ID#4256)

• Fixed PMAD-AA incorrect reporting of MAC/station address to VMS 5.5-2H4 (ID#4255)

• Fixed Charon DIT licensing in application and service mode (ID#4182, #4301)

• Fixed Charon-VAX/6660 crash with "divided by zero" error (ID#4316)

• Fixed DECNET operating over serial lines (ID#3035)

• Fixed poor DECNET performance in Network Load test (ID#2985)

• Fixed physical serial line lock-ups (ID#3036, #3991)

• Fixed VMS hang on attempting  to login over modem (ID#3053)

• Fixed incorrect license behavior when host time is backdated (ID#4058)

• Fixed MTD utility issue with no access to some SCSI tape drives (ID#3927)

• Fixed Charon crash with exception (C0000005) at 000000000071EF46: Segmentation violation (ID#4066)

• Fixed Network Control Center monitoring features (ID#3922)

• Fixed Windows SErver 2012 version detection (ID#3920, #3921)

• Fixed MicroVAX II running OpenVMS 4.5 network circuit going down every few seconds (ID#3916, #4068)

• Fixed VAX VMS 6.2 (patched) crash with disks over 17GB (ID#3895)

• Fixed issues setting up DSSI VAX Cluster (ID#3885)

• Fixed an issue with MOUNT/cluster of a shared iSCSI disk on VAX 6310 (ID#3390)

• Fixed inappropriate license check interval (ID#3754)

• Fixed BIRQ handling on VAX (ID#3756)

• Improved Charon logging for missing license (ID#3116)

• Fixed on the fly switch to backup dongle (ID#3690)

• Fixed CD-ROM going offline if there was no disk in the host CD-ROM drive on Charon startup (ID#3518)

• Various fixes in Charon logging and clear reporting of the issues (ID#3747, #3774, #3775, #3799, #3816, #4214)

• Various fixes for HaspView utility (ID#3720, #3722)

• Fixed MKDISK disk size calculation (ID#3812)

• Drive error when tried to boot from unit 0 of MU (ID#3599)

• Shadowing with physical drive does not work properly with VAX 3100 / 4000 models (ID#3313)

• CDROM does not work properly with VAX 3100 / 4000 models (ID#3314)

• "Removable" qualifier does not work in cerrain situations (ID#2738)

• VAXELN hangs at boot stage on Charon-VAX VAX4000 Model 90 (ID#3499)

• Charon-66x0 VAX6k310 hangs on "Initializing system" stage  (ID#3363)

• Ultrix V4.3 and V4.5 does not boot properly on Charon-VAX MicroVAX II (ID#3365)

• OpenVMS 5.5-2 boot fails on Charon-VAX VAX4000 Model 106 (ID#3413)

• In certain situations, Charon-VAX VAX6000 Model 310 is not bootable (ID#3565)

• Charon-VAX VAX6000 Model 310 cannot use Charon IDLE package utilities (ID#3578)

• Charon-VAX permanently bugchecking in UCX FTP ACP (ID#3582)

• Several DMA problems on the new FPGA base PCI2QBUS adapter (ID#3583)

• The installation process becomes slow if a lot of Charon products have already been installed on one host (ID#3388)

• Charon crashes with "C0..005" exception in some particular environments (ID#3425)

• F6 pressing does not stop Charon if console is physical VT100 (ID#3483)

• Backup license works more time than specified (ID#3484)

• Charon-VAX 6620+ crashes VMS extensively when running on 4.4GHz Core i7 when ACE is enabled (ID#3494)

• Update product copyright year -> 2012 (was: Update date in log-file) (ID#3517)

• Charon-VAX VAX66x0 SMP configuration crash with CPUSANITY when running on high end server (ID#3533)

• VAX VMS BUG CHECK happens when CPUSPINWAIT CPU spinwait timer expired (ID#3540)

• Charon-VAX VAX6620 hangs when running VAX ROM diagnostic (ID#3542)

• Wrong service dependency list for SL-protected executables (ID#3567)

• Guard Page Violation exception walking through exception stack to avoid exception during exceptions processing (ID#3424)

• Update HASP View in order not to decrease counters (ID#3310)

• Charon-VAX VAX6000 Model 310 is unable to initialize a virtual tape (ID#3389)

• QUART handles DTR incorrectly (ID#3429)

• "set term/speed=***" comand does not work with physical VT100 (ID#3409)

• Charon-VAX VAXstation 4000 model 90 does not display PMAD-AA instance in its SRM console (ID#3339)

• Error message during installation of Charon-VAX on Windows 7 (ID#3367)

• Issue configuring TL891 on Windows Server 2008R2 (ID#3369)

• HASP HL License Recording Utility migration to 3.21 firmware (ID#2520)

• Crash of Charon-VAX/XM+ build 122-04 emulating VS4090 model (ID#3292)

• VCB02 screen refuses to close on shutdown (ID#3295)

• VAXstation 4000 Model 90 is unable to bootfrom MDM virtial tape container (ID#2969)

• Charon services incorrect dependence (ID#3325)

• Broken initialization in PMAD-AA module (may crash VS4K90 emulator) (ID#3341)

• Modem problem on Charon-VAX for Windows (ID#3269)

• After upgrading to 3.3.91 the serial lines do not operate correctly anymore in particular environments (ID#2014)

• Assertion check failed at line 170, file ../storage/mscpctlr.cxx (ID#3274)

• DEP exception list is not populated with installed VAX models (ID#2405)

• Charon-VAX VAX4108 cluster system crash (ID#3096)

• Charon shows "Windows 7 Business Edition" instead of "Windows 7 Professional" (ID#3167)

• Charon-VAX VAX6000 Model 310 is not bootable (ID#3205)

• Charon-66x0 Models VAX6k610 / VAX6k620 are not bootable (ID#3208)

• Licence can be limited both by execution counter and expiration date (ID#3303, #3311)

• Charon service exits on user logoff (ID #3134)

• UETP fails on a tape image if Charon runs on VMware (ID#2427)

• Some serial line errors on Charon-VAX when MOXA board is used (ID#3210)

• Physical drive does not work properly with VAX3100 / 4k models (ID#3261)

• Hibernation of remote host connected to Charon-VAX via telnet (console) leads to break of connection till Charon is restarted (ID#3268)

• Charon shows "Windows 7 Business Edition" instead of "Windows 7 Professional" (ID#3167)

• Charon Service is unable to show console window (ID#3179, 3180)

• Charon Service is unable to detect Windows Server 2008 R2 host shutdown. (ID#3181)

• VAX6660 becomes slow if 3.5Gb emulated memory is configured (ID#2789)

• Idle Slowdown is not working on MVII/3600 (ID#2816)

• Utilities from idle_vms_pkg.vdisk are not working with MVII/3600 (ID#2817)

• SHUTDOWN utilities from idle_vms_pkg.vdisk produce no effect on MV3100/4000 (ID#2818)

• Charon causes Windws to reboot every time when OpenVMS starts TCP service right  after starting DECnet (ID#2324)

• Remote desktop issues with license access on Server 2008 R2 (ID#2571)

• In some cases  \\.\SCSI... access to disk device is blocked by Windows OS (ID#2740)

• VAX 4000 hangs booting VMS from virtual DSSI drive (ID#2733)

• VAX 6000 is unable to boot from KFMSA XMI DSSI Adapter (ID#2759)

• Charon service is installed with incorrect Home Directory specified (ID#2776)

• Incorrect behavior of COBOL application (ID#2787)

• Setting "scs_node_name=STREAMER " is not stored properly (ID#2831)

• SHOW DEV shows no UQSSP devices after VMS shutdown (ID#2877)

• "%MOUNT-F-NOSUCHDEV, no such device available" is reported sometimes when booting VAX/VMS V7.3 with DSSI disk drives (emulation timing issue) (ID#2873)

• Truncated DMA transfer errors happen when booting VAX/VMS V7.3 from DSSI disk drive (ID#2872)

• Setting "MI,TF85" parameter for HSD50 tape device causes Charon to exit (ID#2830)

• Incorrect "OS Environment" content is reported in Charon log file on Windows 7 and Windows 2008 R2 (ID#2820)

• FEPROM content is not preserved if Charon exits abnormally or runs as service (ID#2777)

• OpenVMS hangs at shutdown if certain Charon configurations are used (OPCCRASH hangs) (ID#2508)

• Incorrect log messages about unconfigured serial lines were removed

• SCSIcheck utility does not recognize iSCSI volumes correctly (ID#2448)

• Remove extra spaces from Virtual Disk Table and Virtual Disk Metadata files (ID#2596)

• Windows registry keys to be removed on complete deinstallation (ID#2572)

• Ticket #8029: Mounting disks is happening slower than in the previous releases (ID#2566)

• "sst.h:906 assert(immediate_ssts == 0)" happens from time to time when running VAX 6610  (ID#2560)

• When trying to run Charon-VAX executables the following error message is displayed: "The procedure entry point SetThreadStackGuarantee could not be located in the dynamic link library KERNEL32.dll" (ID#2615)

• Install Wizard crash (ID#2643)

• The Charon.rom file cannot be created (ID#2440)

• VMS 6.1 and below does not install from standalone backup and does not boot (ID#2438)

• POST errors in TEST Subtest (ID#2307)

• Chinese-Simplified locale makes Charon-VAX process non-operational (ID#2697)

• USB Floppy Drive is OFFLINE to VMS when connected to SCSI Controller of MicroVAX 3100 Model 98 (ID#2696)

• Problem using CDROM on HP 465c blade server connected via USB (ID#2651)

• Charon-VAX crashed with incorrect configuration file (network part) (ID#2622)

• The default CFG file produces error messages about missing serial devices TTA0, TTA1 and TTA2 (ID#2338)

• DAT72 tape problem: "error in tape label processing" and "tape is not valid ANSI format" error messages (ID#2213)

• Windows Server 2008 CN: "Invisible" Installation Log (empty log file) (ID#2678)

• A file "mkdisk.vtable" is absent in the kit -- it prevents the MKDISK from starting normally (ID#2589).

• Incorrect text encoding in the NetDiag help on Chinese systems (ID#2373).

• Install procedure does not inform when unsupported host platform is attempted (ID#2431).

• Putty Console does not work (no proper session is available) when Charon-VAX runs as a service (ID#2452).

• ID#2471 - Ticket #7687: Pressing "F6" button terminates emulator. The default reaction must be changed to "none"

• Network Control Center utility does not recognize teamed interfaces (ID#2331)

• Some license messages are absent in the LOG file, for example "the license is expired" (ID#2040)

• Grammar error in message text: some typos should be corrected (ID#2428)

• log_method="append" does not work if specified separately from the other configuration commands for the logging definition (ID#2450).

• Utilities help does not start when "F1" is pressed on Windows 2008 / Vista operating systems (ID#2498)

• Ticket #7774: Problems NDIS6 driver - memory leak is found (ID#2490)

• Many question marks sometimes displayed in the Network Control Center Chinese help file (ID#2373)

• "EXA0: Failed to create symbolic link to the packet driver" error prevents using Charon-VAX networking despite the configuration is correct (ID#2554)

• "Back" button does not always work during installation

• An error message could appear during uninstallation of Charon-VAX through Control Panel

• Charon-VAX may wrongly report that no license is present if the correct license is present.

• Too many scheduled starts and stops of Charon-VAX service in a short period of time could cause Charon-VAX crash. 

Related Documents

Charon-VAX/PDP V4.12 for Windows - User's Guide (still internal!)

STROMASYS SA
http://www.stromasys.com

...