Page Comparison

AnchorTopLicPageTopLicPage Include PageKBCOMMON:KB-CSSstyleKBCOMMON:KB-CSSstyle

General description

The CHARON-VAX / CHARON-PDP products are protected by licenses issued on a customer basis by STROMASYS Inc. The CHARON-VAX / CHARON-PDP license defines all the specifics of a particularCHARON-VAX / CHARON-PDP distribution and its usage.

Anchor

	TOC
	TOC

Include Page

	KBCOMMON:KB-CSSstyle
	KBCOMMON:KB-CSSstyle

General description

The CHARON-VAX / CHARON-PDP products are protected by licenses issued on a customer basis by STROMASYS Inc. The CHARON-VAX / CHARON-PDP license defines all the specifics of a particular CHARON-VAX / CHARON-PDP distribution and its usage.

The license is implemented in the form of a hardware dongle (a Sentinel HASP key) or a software license bound to the hardware. Please be careful with your license key, in case of loss or damage, the CHARON VMs will not run or start until the license key is replaced. For extra protection, STROMASYS recommends the use of a backup license key (purchased separately) that can replace the main license key for a restricted period of time. It is possible to specify the backup license in the CHARON VM configuration file to prevent CHARON VM from stopping in case the main license dongle is no longer accessible.

...

Note that if the time-restricted license is used and it expires, CHARON the CHARON VM tries to find its replacement automatically and, if found, CHARON VM proceeds using the replacement license.

Warning

The CHARON-VAX / CHARON-PDP software license is not distributed for Proof-of-Concept and evaluation installations. Only hardware dongles are used in this these cases.

It is important to connect the HASP license keys to the computer , powered on even if the CHARON VM is not running , because the because the keys contain a built-in accumulator battery that needs to be charged. If the accumulator battery is completely discharged, the license key can be irreparably damaged.

Update of the CHARON VM license can be performed on the fly without stopping CHARON VM. All the parameters including the the CHARON VM. The expiration date and time execution counter can be updated w/o any restrictions., however the CHARON VM virtual hardware configuration should remain unchanged. At the next license check, the CHARON VM will use the updated license normally.

The following sections list all the main parameters of the CHARON-VAX / CHARON-PDP licensing mechanism.

...

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Parameters defined by CHARON VM license

...

General	Products relevant	Optional
Physical key ID License Number End user name Master key ID License release date and time Update Number Purchasing Company name. In most cases the company to which the key was issued originally	Commercial product name Commercial product code Commercial product version and range of build numbers suitable for running Range of CHARON VM virtual models available for running Type of host CPU required Host operating system required Number of virtual CPUs enabled for virtual SMP systems Minimum number of host CPU cores required Minimum host memory required Maximum memory emulated. If not present the value defaults to the maximum memory possible for the particular virtual system. Note that the maximum memory may not be available to the virtual system if the host computer has insufficient physical memory. Maximum number of CHARON VM instances that can be run concurrently Whether or not CHAPI (CHARON API) can be used with this product Product and Field Test expiration dates (if any) Product and Field Test executions counter (if any) Maximum number of hosts that may run CHARON VM concurrently (in the case of a networking license) Level of support (if any), end date of any support contract, the "First Line" Service Provider Frequency of CHARON VM license checking during CHARON VM execution	Possibility to attach hardware QBUS/UNIBUS hardware via adapter Parameter that reduces the maximum speed of the program Parameter that enables the product to support additional serial lines through an option board from a company such as DIGI Parameter that prohibits use of Advanced CPU Emulation. If not present the Advanced CPU Emulation is enabled Parameter that enables the emulation of the IEQ11-A IEEE488 Controller (on top of the DCI-3100 IEEE488 Controller) Parameter that enables the emulation of the DRV11-WA I/O controller (on top of the DCI-1100 I/O controller)

...

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

CHARON-VAX / CHARON-PDP licensing models

...

Regular Sentinel HASP keys

This is the most common way of CHARON-VAX / CHARON-PDP licensing.

The CHARON-VAX / CHARON-PDP license PDP license is embedded in a Sentinel HASP dongle. This license is available only on the host where the dongle is physically installed.

The CHARON-VAX / CHARON-PDP installation procedure takes care of the Sentinel HASP run-time (driver) installation. Once the CHARON-VAX / CHARON-PDP product has been installed, it is possible to plug in the regular license key and proceed with using CHARON-VAX / CHARON-PDP without additional configuration steps.

Info
The number of CHARON VMs allowed to run on a particular host may be restricted by the license content (see above).

...

The Network Sentinel HASP key (red dongle) can be shared between several hosts running CHARON VM virtual machines (including the host on which the network license is installed).

If CHARON-VAX / CHARON-PDP is installed on the host where the network key is connected, no additional steps are required. The Sentinel driver is activated as part of the CHARON-VAX / CHARON-PDP installation. If the host does not have CHARON-VAX / CHARON-PDP installed, the host can still distribute the connected network license to CHARON VMs (s) to the CHARON virtual machines running on other hosts. In this case the Sentinel driver must be installed on the host manually.

The Sentinel run-time driver is distributed as a part of the CHARON-VAX / CHARON-PDP kit. Please see the "License installation" section of this chapter for details.

Once the Sentinel run-time driver is installed and the network license is connected, CHARON VM can be started on any appropriate host on the LAN network segment. A network run-time driver is installed and the network license is connected, the CHARON VM can be started on any appropriate host on the LAN network segment.

Info

CHARON-AXP/VAX version 4.7 build 171-01 introduced a change with respect to network licenses. In previous versions of CHARON-AXP/VAX a network license controlled the maximum number of client host systems and CHARON instances per host system (station/instance mode).

In the current CHARON-AXP/VAX versions a network license controls the maximum overall number of active instances, which can be distributed across client host systems according to the preference of the customer.

Software licenses

The CHARON-VAX / CHARON-PDP Software License (SL) is a "virtual" key with exactly the same functionality as the hardware dongle. The CHARON-VAX / CHARON-PDP Software License It does not require any hardware but it requires the installation of the Sentinel run-time environment is required.

Note
The Software

licenses are always network-wide on Windows, so they behave the same way as Network HASP keys.

Back to Table of Contents

Multiple licenses configuration and backup license

For any type of licensing, CHARON VM can use only one valid ("active") license (of given vendor code) at a time.

The "HASP License details" utility (it can be started from CHARON Virtual Machines Manager) displays a range of available licenses, but note that by default CHARON VM may use any of them as the "active" one - unless it is directly specified by the "license_key_id" parameter (see below). The utility provides the license numbers and ID / IP addresses of the hosts where the licenses are installed.

Warning

CHARON VM cannot:

check all the available license keys / software licenses,
choose one,
automatically switch from one key to another.

The general recommendation is to avoid usage of multiple keys in one network segment. Use only one locally installed license per host or one network license per local network segment containing several CHARON VM hosts.

Div

class	pagebreak

When needed, it is possible to use a special parameter in the CHARON VM configuration file to specify exactly which license must be used by each particular CHARON VM:

ParameterTypeValuelicense_key_id[N], N=0 or 1Numeric

A number (decimal Sentinel key ID) that specifies regular (N=0) and backup (N=1) license keys to be used by CHARON VM.

Example:

set session license_key_id[0]=1877752571 set session license_key_id[1]=354850588

It is also possible to specify both regular and backup key in one line

Licenses (SL) are best suited for stable environments because their correct function depends on certain characteristics of the host system. Changing any of these characteristics will invalidate the license.

If the CHARON host runs on real hardware, the software licenses are by default tightly bound to the hardware for which they were issued. If major hardware characteristics of the system are changed, the license will be disabled.
If the CHARON host runs in a virtual environment (e.g. VMware), software licenses are normally bound to the virtual machine ID and a set of additional characteristics of the virtual machine. If any of these parameters are changed, the license will be disabled.

For a more detailed description of the restrictions, please refer to Software Licensing restrictions or contact your Stromasys representative.

Software licenses are always network-wide on Windows, so they behave the same way as Network HASP keys.

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Multiple licenses configuration and backup license

For any type of licensing, a CHARON VM can use only one valid ("active") license (of given vendor code) at a time.

The "HASP License details" utility (it can be started from CHARON Virtual Machines Manager) displays a range of available licenses but note that, by default, a CHARON VM may use any of them as the "active" one - unless it is directly specified by the "license_key_id" parameter (see below). The utility provides the license numbers and ID / IP addresses of the hosts where the licenses are installed.

The general recommendation is to avoid the usage of multiple keys in one network segment. Use only one locally installed license per host or one network license per local network segment containing several CHARON hosts.

When needed, it is possible to use a special parameter in the CHARON VM configuration files to specify exactly which license must be used by each particular CHARON VM:

id[0]=1877752571 license_key_id[1]=354850588Depending the regular and/or backup license key IDs VM differently
VM behaves as usual () keys are VM Both VM regular license key. If it is not found, CHARON VM performs qualified search for backup license key VM exits.

Only regular key is specified
CHARON VM performs qualified search for regular license key. If it is not found, CHARON VM performs unqualified search for any suitable key. If it is not found, CHARON VM exits.

Only backup key is specified
CHARON VM behaves as usual (performs unqualified search for any suitable key). If no keys are found, CHARON VM exits

Parameter

license_key_id

Type Text string

Value

A set of Sentinel Key IDs that specifies the license keys to be used by CHARON. It is also possibly to use a keyword "any" to force CHARON to look for a suitable license in all available keys if the license is not found in the specified keys.

Example:

set session license_key_

id = "1877752571,354850588,any"

Based on the presence of

this parameter in the configuration file, CHARON

behaves

as follows:

No keys are specified (the parameter is absent)
CHARON

performs an unqualified search for any suitable key

in unspecified order. If no

key is found, CHARON

exits.

One or many keys are specified
CHARON

performs a qualified search for

a regular license key in the specified order. If it is not found, CHARON

exits (if the keyword "any" is not set).

If the keyword "any" is specified then if no valid license has been found in the keys with specified ID’s all other available keys are examined for valid license as well.

The order in which keys are specified is very important. If a valid license was found in the key which ID was not the first one specified in configuration file, then available keys are periodically re-scanned and if the key with the ID earlier in the list than the current one is found CHARON tries to find a valid license there and in case of success switches to that key.

This parameter also specifies the license which will be used as backup if the active license expires.

...

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

License installation

Installation from scratch

Info

Before installation of installing the license make sure that the Sentinel run-time (driver) to be installed is collected from your CHARON kit or provided by STROMASYS on request for your particular product. Do not update the Sentinel run-time (driver) from online or any other sources, including the Sentinel web site.

In case of several CHARON kits containing different versions of Sentinel run-time (driver), the last one (, having more the most recent version) , must be installed. The CHARON installation performs this operation automatically.

...

class	pagebreak

Installation of a CHARON-VAX / CHARON-PDP regular or network licenses license consists of:

Installation of the Sentinel run-time environment on the CHARON-VAX / CHARON-PDP host (regular and network keys) or on the host that will distribute CHARON-VAX / CHARON-PDP licenses over a local network segment (network key only). The Sentinel software is installed automatically by CHARON-VAX / CHARON-PDP for Windows.Physical connection of the HASP license dongle to the CHARON-VAX / CHARON-PDP host or to the host distributing the and network keys) or on the host that will distribute CHARON-VAX / CHARON-PDP license licenses over the a local network segment .
Collecting system fingerprint (*.c2v file), sending it to STROMASYS and applying update (*.v2c file) in case of software license. See the details below.

When manual installation of Sentinel run-time is required (in the case of the network license server that does not have

(network key only). The Sentinel software is installed automatically by CHARON-VAX / CHARON-PDP for Windows.
Physical connection of the HASP license dongle to the CHARON-VAX / CHARON-PDP

installed):

Login as Administrator

Open

host or to the host distributing the CHARON-VAX / CHARON-PDP

kit folder

Switch to the "hasp_install" subfolder

Unzip the archive located in this folder

Open "cmd.exe" and switch to the folder where the files were unzipped

Issue:

...> haspdinst.exe -fr -kp -nomsg
...> haspdinst.exe -install -cm Info

Note that the following operations have to be performed on installation phase for network licenses:

On server side (where network license will reside): open port 1947 for both TCP and UDP

On the client side, if broadcast search for remote licenses is to be used, UDP traffic from port 1947 of the license server to ports 30000-65535 of the client must be permitted.

Both on server and client sides: setup default gateway

Please consult with your Windows User's Guide on details.

If stricter firewall rules are required, it is possible to open the ports 30000-65535 and 1947 only for the "Sentinel HASP License Manager" (hasplms.exe) service (it will be installed by CHARON-VAX / CHARON-PDP).

Back to Table of Contents

Replacement of currently installed Sentinel run-time

Replacement of currently installed Sentinel Run-time can be needed in case of installation of specific run-time provided by STROMASYS.
Below please find step-by-step instructions on the run-time replacement:

Remove the current version of Sentinel run-time:

Login as Administrator
Extract content of the unique ZIP file residing in “hasp_install” directory of the CHARON distribution to the same folder.
Run “cmd.exe” from “Start” menu of host computer
“cd” to the “hasp_install” directory
Issue the following command:
...> haspdinst.exe -fr -kp -nomsg
.

Install other Sentinel run-time:

“cd” to the directory where the target run-time resides
Issue the following command:
...> haspdinst.exe -fr -kp -nomsg
.

Info
You do not need to perform this procedure for Sentinel HL keys - local and network ones (red dongle) used as local.

...

Installation and update of CHARON-VAX/PDP Software License or HL/HASP dongle License

CHARON-VAX / CHARON-PDP software licenses can be installed / updated according to the procedure described below. This procedure is also applicable for update of a license in case of HL/HASP dongles.

...

Install CHARON-VAX / CHARON-PDP together with Sentinel run-time (Sentinel run-time is an essential part of CHARON-VAX / CHARON-PDP for Windows distribution)

...

Reboot host system

...

license over the local network segment.
Collecting the system fingerprint (*.c2v file), sending it to STROMASYS and applying the update (*.v2c file) in case of software license (and in case of updating HASP dongle license). See the details below.

When a manual installation of the Sentinel run-time is required (in the case of the network license server that does not have CHARON-AXP installed):

Login as Administrator
Open the CHARON-VAX/PDP kit folder
Switch to the "hasp_install" subfolder
Unzip the archive "haspdinst.zip" located in this folder
Open "cmd.exe" and switch to the folder where the files were unzipped
Execute the following commands:

...> haspdinst.exe -fr -kp -nomsg
...> haspdinst.exe -install -cm
Extract the contents of this archive "hasplib.zip" to the same directory.
Copy the file "haspvlib_68704.dll" to "C:\Program Files (x86)\Common Files\Aladdin Shared\HASP" (in case of x64 host) or "C:\Program Files\Common Files\Aladdin Shared\HASP" (in case of x86 host)

Info

Note that the following operations have to be performed on installation phase for network licenses:

On the server side (where the network license will reside): open port 1947 for both TCP and UDP
On the client side, if broadcast search for remote licenses is to be used, UDP traffic from port 1947 of the license server to ports 30000-65535 of the client must be permitted.
Both on server and client sides: setup default gateway

Please consult with your Windows User's Guide on details.

If stricter firewall rules are required, it is possible to open the ports 30000-65535 and 1947 only for the "Sentinel HASP License Manager" (hasplms.exe) service (it will be installed by CHARON-VAX / CHARON-PDP).

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Replacement of currently installed Sentinel run-time

Replacement of the currently installed Sentinel Run-time can be needed in case of installation of specific run-time provided by STROMASYS.

To proceed, remove the current version of Sentinel run-time:
- Login as Administrator
- Extract the content of the unique ZIP file residing in “hasp_install” directory of the CHARON distribution to the same folder.
- Run “cmd.exe” from the “Start” menu of host computer
- “cd” to the “hasp_install” directory
- Issue the following command:
  
  ...> haspdinst.exe -fr -kp -nomsg
Install the other Sentinel run-time:
- “cd” to the directory where the target run-time resides
- Issue the following command:
  
  ...> haspdinst.exe -install -cm
- “cd” to the “hasp_install” directory
- Extract the contents of this archive "hasplib.zip" to the same directory.
- Copy the file "haspvlib_68704.dll" to "C:\Program Files (x86)\Common Files\Aladdin Shared\HASP" (in case of x64 host) or "C:\Program Files\Common Files\Aladdin Shared\HASP" (in case of x86 host)
.

Info
You do not need to perform this procedure for Sentinel HL keys - local and network ones (red dongle) used as local.

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Installation and update of CHARON-VAX/PDP Software License or HL/HASP dongle License

The CHARON-VAX / CHARON-PDP software licenses can be installed / updated according to the procedure described below:

Install CHARON-VAX / CHARON-PDP together with Sentinel run-time (Sentinel run-time is an essential part of CHARON-VAX / CHARON-PDP for Windows distribution)
Reboot the host system
Connect the HASP dongle to the host system (in case of update of a license in located on a dongle)
Collect the CHARON-VAX / CHARON-PDP host fingerprint file ("*.c2v")
Open the CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "License Update tool" button to envoke envoke the "License Update Service" utility:
Image RemovedImage Added

.

In the utility dialog popup switch to the "Collect Status Information" tab (opened by default) then select:

.

In the utility dialog popup open the the "Collect Status Information" tab , then select(opened by default) then select:

"Installation of new protection key" ( in case of Software License if no Software License has been already installed on the host):.
Example:
Image RemovedImage Added
.

"Update of existing protection key" ( in case of HL/HASP dongle or Software License that has been already installed on the host and needs updating).

Div

class	pagebreak

Example:Image Removed

Image Added

Note

In case of When using HASP dongles use , select only the "Update of existing protection key" option!.

In case of Software License use the "Installation of new protection key" option if the host does not have any Software License installed and the "Update of existing protection key" option if an already installed Software License has to be updated.

Press the "Collect Information" button. In the popup dialog choose the place to store the "Fingerprint.c2v" file and press the "Save" button:Image Removed
Image Added
Div
class pagebreak
A message should appear similar to this example, confirming the fingerprint has been collected successfully.
Image Removed
Image Added.
Send the ".c2v" file ("Fingerprint.c2v" in the example above) to STROMASYS
STOMASYS will send you a ".v2c" file in return. Put it somewhere on the CHARON-VAX / CHARON-PDP host.
Open up the "License Update Service" utility the way described above and open the "Apply License File" tab:
Image RemovedImage Added
Div
class pagebreak

Press the "..." button beside the "Update File" edit-box. In the popup select the license file received from STROMASYS:
Image Removed
Image Added

Press the "Open" button and apply the license.
Open the CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "Sentinel Admin Control Center" button:

Image RemovedImage Added
or - alternatively - start any web browser on this system and go to the http://localhost:1947 page to access the "Sentinel HASP Admin Control Center" (ACC).
Div
class pagebreak
Ensure that the license appears in the “Sentinel Keys” menu.

...

class	pagebreak

.

Info

As the content of the installed software or HL/HASP license is not shown by the Sentinel HASP Admin Control Center, press the "HASP License Details" button in the "Host Information & Utilities" section of the CHARON Virtual Machines Manager (see above) to display it:

Image RemovedImage Added

...

Info

Note that the following operations have to be performed on installation phase for network-wide software licenses:

On the server side (where network license will reside): open port 1947 for both TCP and UDPOn the client side, if broadcast search for remote licenses is to be used, UDP traffic from port 1947 of the license server to ports 30000-65535 of the client must be permitted.
Both on server and client sides: setup default gateway

Please consult with your Windows User's Guide on details.

If stricter firewall rules are required, it is possible to open the ports 30000-65535 and 1947 only for the "Sentinel HASP License Manager" (hasplms.exe) service (it will be installed by CHARON-VAX / CHARON-PDP).

Back to Table of Contents

License management

CHARON-VAX / CHARON-PDP license management is performed by the Sentinel Admin Control Center and specific utilities.

Sentinel Admin Control Center

General Description

The Sentinel Admin Control Center (ACC) is the web-interface to the Sentinel run-time environment. It allows the viewing and managing of any available keys, enabling and disabling them, controlling usage of remote keys etc.

Info
Sentinel Admin Control Center is not able to display CHARON-VAX / CHARON-PDP licenses - to view key contents, use the "HASP View" utility.

...

class	pagebreak

To access Sentinel Admin Control Center start any web browser, enter http://localhost:1947 and press Enter. Web interface of the Sentinel Admin Control Center will appear.

Example:

: open port 1947 for both TCP and UDP
On the client side, if broadcast search for remote licenses is to be used, UDP traffic from port 1947 of the license server to ports 30000-65535 of the client must be permitted.
Both on server and client sides: setup default gateway

Please consult with your Windows User's Guide on details.

If stricter firewall rules are required, it is possible to open the ports 30000-65535 and 1947 only for the "Sentinel HASP License Manager" (hasplms.exe) service (it will be installed by CHARON-VAX / CHARON-PDP).

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

License management

CHARON-VAX / CHARON-PDP license management is performed by the Sentinel Admin Control Center and specific utilities.

Sentinel Admin Control Center

General Description

The Sentinel Admin Control Center (ACC) is the web-interface to the Sentinel run-time environment. It allows the viewing and managing of any available keys, enabling and disabling them, controlling usage of remote keys etc.

Info
Sentinel Admin Control Center is not able to display CHARON-VAX / CHARON-PDP licenses. To do this operation, open the CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "HASP License Details" button (see below).

To access the Sentinel Admin Control Center, open the tCHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "Sentinel Admin Control Center" button:

Image Added

Div

class	pagebreak

or - alternatively - start any web browser on this system and go to the http://localhost:1947 page.

Example:

Image Added

This example demonstrates that 4 license keys are available:

Network A network key ("HASP-HL NetTime") on the host "XEON4WAYW7"
Network A network key installed locally
An HASP-HL installed locally
NetworkA network-wide software license on the host "RH64"

The Sentinel Admin Control Center reports that there is one opened session on key (4)#4. The other keys are not being used at the moment.

For a more detailed description of the Sentinel Admin Control Center, please refer to its "Help" section.

...

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Disable remote keys access

A helpful feature of the Sentinel Admin Control Center is the ability to disable access to remote keys. If the network key is installed locally, access to the key from remote hosts can be disabled. The following examples demonstrate how this can be done.

To disable access to remote keys, switch to the "Access to Remote License Managers" tab and , uncheck the "Allow Access to Remote Licenses" check box . Then then press the "Submit" button to apply this change:

Image RemovedImage Added

Div

class	pagebreak

To disable access to the locally installed license key from remote hosts switch hosts, switch to the "Access from Remote Clients" tab and , uncheck the "Allow Access from Remote Clients" check box . Then then press the "Submit" button to apply this setting:

Image Removed

Back to Table of Contents

setting:

Image Added

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

License management utility

CHARON-VAX / CHARON-PDP for Windows provides two specific utilities for license management:

"HASP View" . This - This utility is used to display CHARON-VAX / CHARON-PDP license the license(s) content.
"License Update Service" . - This utility is used to collect key status information and host fingerprint (C2V) files , and to apply updates (".v2c" files) and perform the license transfer/removal.

Please refer to the "Utilities" section of this Guide for more details.

Back to Table of Contents

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Removing CHARON-VAX / CHARON-PDP software licenses

...

The following procedure must be applied to remove the software license (SL):

Open the CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "Sentinel Admin Control Center" button:
Image Added
or - alternatively - start any web browser on this system and go to the http://localhost:1947 page.
In the "Sentinel HASP Admin Control Center" (ACC), select the "Sentinel Keys" option in the left pane and locate the target "Sentinel SL AdminMode" license.
Press the "Certificates" button at the right side of the SL description:
Image Removed
Image Added
.
Div
class pagebreak
Note the name of the correspondent certificate and path to the certificates base in the "Certificates" section:Image Removed
.. The name is in the form of <KeyID>_base.v2c
Remove the corresponding certificate file . In the example above the file to remove is in the "C:\Program Files (x86)\Common Files\SafeNet Sentinel\Sentinel LDK\installed\68704\387285561437702475_base.v2c"\68704" folder.
Reboot the CHARON host.
Start the "Sentinel HASP Admin Control Center" (ACC) again to ensure that the SL has been removed.

Back to Table of Contents

Divclasspagebreak

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

License Deinstallation

To completely remove a CHARON VM -VAX / CHARON-PDP license from a host, it is enough to remove the Sentinel run-time driver using the following procedure:

Login as Administrator
Open the CHARON VM CHARON-VAX / CHARON-PDP kit folder
Switch to the "hasp_install" subfolder
Unzip the archive located in this folder
Open "cmd.exe" and switch to the folder where the files were unzipped
IssueExecute the following command:
...> haspdinst.exe -fr -kp -nomsg

Remove Unplug the license dongle. Note that the Sentinel run-time driver is deinstalled automatically on CHARON VM with a complete deinstallation.

...

uninstalled automatically when a complete uninstallation of CHARON-VAX / CHARON-PDP is performed.

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Special "backup" license keys

Backup keys are provided by STROMASYS along with the standard license dongles. It is strongly recommended to order a backup key to recover immediately from damage or loss of the main license key. Backup The backup keys use a counter (integer) value hardcoded inside the key. This , this integer value is a number of hours CHARON-VAX / CHARON-PDP is allowed to run. Each time CHARON VM time CHARON-VAX / CHARON-PDP checks the license (every hour), the value is decreased (by 1 hour). Please note that the backup keys have restricted functionality:

CHARON VM The run time is typically limited to 720 hours (30 days). This is the time alloted to get a replacement dongle from STROMASYS.
A Backup backup license may be valid only until a certain date. Please check with STROMASYS management.

Back to Table of Contents

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Versions Compared

Old Version 9

New Version Current

Key

Table of Contents

General description

Table of Contents

General description

Parameters defined by CHARON VM license

CHARON-VAX / CHARON-PDP licensing models

Regular Sentinel HASP keys

Software licenses

Multiple licenses configuration and backup license

Multiple licenses configuration and backup license

License installation

Installation from scratch

Replacement of currently installed Sentinel run-time

Installation and update of CHARON-VAX/PDP Software License or HL/HASP dongle License

Replacement of currently installed Sentinel run-time

Installation and update of CHARON-VAX/PDP Software License or HL/HASP dongle License

License management

Sentinel Admin Control Center

General Description

License management

Sentinel Admin Control Center

General Description

Disable remote keys access

License management utility

Removing CHARON-VAX / CHARON-PDP software licenses

License Deinstallation

Special "backup" license keys