Page Comparison

Anchor

	TopUtilPage
	TopUtilPage

...

CHARON-AXP provides the following set of utilities:

Utility	Description
mkdskcmd	Used to create CHARON virtual disk containers of custom or standard types. This utility also may be used to transfer virtual disks of one type to virtual disks of another type.
hasp_srm_view	Used to display the CHARON license contents, to collect the host system fingerprint and to transfer software licenses from one host to another.
hasp_update	Sentinel standard utility used to retrieve Sentinel protection key information, detach a license from a Sentinel SL key and rehost a license from a Sentinel SL key
ncu	Used to dedicate a host interface to CHARON-AXP, to release it back to the host and to manage CHARON virtual interfaces (TAPs).
mtd	Used to create CHARON tape images from physical tapes and to write tape images back to physical tapes.

All these utilities are invoked from Linux console command line.

...

The first step is to obtain the name of the disk that needs to be created:

$ mkdskcmd --list

This command results in a list of all supported disk types.

Choose the desired disk (for example "RZ22"), then use the "mkdskcmd" command to create the virtual disk image as shown below:

$ mkdskcmd --disk rz22 --output rz22.vdisk

A disk container "rz22.vdisk" will be created in the current directory.

...

To get all the available parameters please use the "–help"switch:

Usage:
mkdskcmd [Options]

Options:

--help - to see help screen

--h - to see help screen

--output <full name> - to specify output file name

--o <full name> - to specify output file name

--disk <disk name> - to specify the disk name from Disk table
-d <disk name> - to specify the disk name from Disk table

--blsize <number> - to specify the block size in bytes (custom disk image)
-z <number> - to specify the block size in bytes (custom disk image)

--blcount <number> - to specify number of the blocks (custom disk image)
-c <number> - to specify number of the blocks (custom disk image)

--avtable <full_name> - to specify AVDISK table file
-a <full_name> - to specify AVDISK table file

-t - please see the '-transform' options description
--transform <source_disk_name> <source_disk_params> - to transform the the disk image (change actual size)

<source_disk_name> - the file name of the disk image to be transformed
<source_disk_params> - the name of the disk from the list of available at the Disk table

The source disk size will changed accordingly the reach the specified parameters.
To specify the transform parameters manually, follow the option below:

--transform <source_disk_name> --blsize <number> --blcount <number>

--shrink - parameter which needs to be EXPLICITLY provided, if the disk size is to be decreased
-k - parameter which needs to be EXPLICITLY provided, if the disk size is to be decreased

--list <full_name> - to display AVDISK table
-l <full_name> - to display AVDISK table

--silent - silent mode running
-s - silent mode running

--transfer - please see the '--transfer' options description
-t - please see the '-t' options description

Return value:
0 - for Success
Non zero - in case of failure

Examples:
   mkdskcmd -h
   mkdskcmd -l
   mkdskcmd -a /opt/charon/bin/mkdsk.vtable -o /etc/rk07.vdisk -d rk07
   mkdskcmd -o /etc/custom.vdisk -z 512 -c 16384

The "--avtable" parameter is used to work with an alternative disk specification database (or to point to the standard database ("mkdsk.vtable") if it is in a location other than the current directory).

...

An example of the syntax follows:

$ mkdskcmd --transfer <source disk file name> <source disk parameters> [--shrink] [-k]

where:

<source disk file name> - a file name of the disk image to be transferred
<source disk parameters> - the name of the disk from the list provided by the "mkdskcmd --list" command execution or the disk geometry specification (see below).
--shrink or -k - used in the case where the target disk is transferred to a smaller disk.

Example:

$ mkdskcmd --transfer /etc/rz22.vdisk rz25

It is also possible to specify the disk parameters manually with "--blcount / -c" (blocks count) and "--blsize / -z" (blocks size) switches:

$ mkdskcmd --transfer <source disk file name> -blsize <number> -blcount <number>

Example:

$ mkdskcmd -t /etc/custom.vdisk -z 512 -c 262134

Warning
There is a certain delay between the moment when the utility reports that a disk image has been transferred and its actual availability to CHARON. This delay can reach to several minutes in case of very big disks transfers. It happens because the host operating systems needs some time for actual allocation of the enlarged file on HDD.

Back to Table of Contents

Div

class	pagebreak

Anchor
mtd
mtd
'mtd' utility

...

Create a CHARON tape image from a physical tape
Write a tape image to a physical tape.

Usage is the following:

$ mtd [options] <tape device name> <tape container name>

where the options are:

Parameter	Description
`-l <file name>`	Creates an execution log “file name”.
`-r <number>`	Specifies a number of attempts to read a damaged data bock
`-i`	Directs to ignore bad blocks and continue processing without interruption. It implies "-r 0"
`-n`	Do not rewind tape
`-p`	Disable progress reporting
`-v`	Enable verbose trace of data transfer (implies "-p")

Example:

$ mtd -l tape1.txt -r 10 /dev/st5 /charon/tapes/tape1.vtape

Use the following syntax to write the content of a tape container to a physical tape:

$ mtd <tape container name> <tape device name>

Example:

$ mtd /charon/tapes/tape1.vtape /dev/st5

Back to Table of Contents

Div

class	pagebreak

Anchor
hasp_srm_view
hasp_srm_view
'hasp_srm_view' utility

...

Run the utility without any options to display the license details.

# hasp_srm_view -help

CHARON Sentinel HASP utility
Copyright: STROMASYS SA, 2013

Options:
    -? or -h or -help - to see help screen
   -l - to see CHARON license details
   -c2v <C2V file> - to collect the key status information (C2V file)
   -fgp <C2V file> - to collect the host fingerprint information (C2V file)
   -tfr <LicenseID> <recipient file> - to transfer HASP SL license (V2C file)
   -tfr <LicenseID> - to remove HASP SL license (V2C file) from the local host
   -idf - to get transfer recipient (ID) file "recipient.id"

The specific type of CHARON license defines what switches may be used in each case.

...

For remote collection of status information it is recommended to use "ssh" as shown in the following examples:

# ssh root@CHARON_HOST /opt/charon/bin/hasp_srm_view -c2v /opt/charon/bin/my_hasp_key.c2v
# ssh root@CHARON_HOST /opt/charon/bin/hasp_srm_view -fgp /opt/charon/bin/my_host_fingerprint.c2v

To see the license text on the console:

# ssh root@localhost /opt/charon/bin/hasp_srm_view

To collect license text to an output file on host server:

# ssh root@localhost /opt/charon/bin/hasp_srm_view > /opt/charon/bin/hasp_srm_view.txt

The "hasp_srm_view" utility always reports the ID and IP address of the host(s) where active licenses are found.

...

Run "hasp_srm_view" utility on the "RecipientHost" with the following parameters to collect the host ID info:
$ hasp_srm_view -idf
The "recipient.id" file will be created in the current directory.
Copy the "recipient.id" file to the "SourceHost".
Info
"recipient.id" is an ASCII file, so use the "ascii" option for FTP transfer.
On the "SourceHost", open the "Sentinel Admin Control Center" (ACC) ( http://localhost:1947). Note the number of the software license you are going to transfer.
Run the "hasp_srm_view" utility in the following way to create a transfer license for the host "RecipientHost":
$ hasp_srm_view -tfr <license number> recipient.id
The "license number" is the value collected at the step 3.
Example of collecting a transfer license:
$ hasp_srm_view -tfr 12345678 recipient.id
A "<license number>.v2c" file will be created in the current directory. In the example above, the name of the transfer license will be "12345678.v2c"
Copy the resulting "<license number>.v2c" file to the "RecipientHost".
Info
"<license number>.v2c" is an ASCII file, so use the "ascii" option for FTP transfer.
On the "RecipientHost", open "Sentinel Admin Control Center" (ACC) (http://localhost:1947) and apply the "<license number>.v2c" file as described above.

...

Open "Sentinel Admin Control Center" (ACC) (http://localhost:1947). Note the number of the software license you are going to remove.
Run the "hasp_srm_view" utility in the following way to remove the license:
$ hasp_srm_view -tfr <license number>
The "license number" is the value collected at step 1.
Example:
$ hasp_srm_view -tfr 12345678
The "<license number>.v2c" file will then be created in the current directory. In the example above the name of the transfer license will be "12345678.v2c"
It is always possible to re-apply the created ".v2c" file to restore the deleted software license.

Back to Table of Contents

...

To invoke the "hasp_update" utility login as "root" and use the following syntax:

# hasp_update <option> [filename]

where:

Parameter	Value	Description
<option>	u	Updates a Sentinel protection key / attaches a detached license
	i	Retrieves Sentinel protection key information
	d	Detaches a license from a Sentinel Software License (SL) key
	r	Rehost a license from a Sentinel Software License (SL) key
	h	Display help
[filename]		Path to the V2C/H2R file when used with the 'u' option
[filename]		Optional path to the C2V file when used with the 'i' option Uses "stdout" if file name is not specified

Example:

# hasp_update u license_update.v2c

Info
We recommend to use this tool only for "Update a Sentinel protection key / attach a detached license" function ("u" option). For the rest use "hasp_srm_view" utility.

...

The utility allocates chosen network interfaces (both physical and virtual) and configures the offload parameters.

Note
The NetworkManager service must be running in order to have all the functionalities enabled with "ncu". If the service is not enabled please configure the network using the manual operations described in the section "Manual configuration of CHARON networking" of the Installation chapter of this Guide.

Div

class	pagebreak

Dedication of a host physical interface to CHARON

Login as root and enter "ncu". The following menu will appear:

Interfaces Dedicated to State
---------- ------------ ------------
eth0 host         connected to host
eth1       host         connected from host
lo         host         unmanaged from host

==================================================================
bridge name bridge id STP enabled interfaces

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
:> 6

The utility lists available network interfaces (both physical and virtual) and indicates whether they are dedicated to the host or to CHARON and whether they are currently in use by host operating system.

...

Enter "1", then type "eth1" and press Enter:

Specify the interface to dedicate to CHARON:eth1
Turning off offloading for eth1.. Please wait

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
:> 5

Div

class	pagebreak

Now the interface "eth1" is dedicated to CHARON-AXP:

Interfaces Dedicated to State
---------- ------------ ------------
eth0       host         connected to host
eth1       CHARON       disconnected from host
lo         host         unmanaged from host

==================================================================
bridge name bridge id STP enabled interfaces

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit

Enter "6" to return to console prompt.

...

Login as root and enter "ncu". The following menu will appear:

Interfaces Dedicated to State
---------- ------------ ------------
eth0       host         connected to host
eth1       CHARON       disconnected from host
lo         host         unmanaged from host

==================================================================
bridge name bridge id STP enabled interfaces

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
:> 2

Let's say that we want to return the interface "eth1" (currently dedicated to CHARON) back to host. To do that enter "2" then "eth1":

Specify the interface to release to HOST:eth1
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/3)

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
:> 6

Enter "6" to quit the "ncu" utility.

...

Login as root and enter "ncu":

# ncu
CHARON Network Configuration Utility, STROMASYS (c) 2015 Version 1.4

Interfaces Dedicated to State
---------- ------------ ------------
eth0       host         connected to host
eth1       host         connected to host
lo         host         unmanaged from host

==================================================================
bridge name bridge id STP enabled interfaces

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Destroy Bridge
5 - Print status
6 - Exit
:> 3

Enter "3" to create a bridge between the host physical network adapter and the LINUX virtual network interfaces (TAP) and specify the physical network interface ("eth1" in our example) and the number of virtual network interfaces to be created (2 in our example):

Specify the interface to be used for BRIDGE:eth1
How many tap should be created:2
Forming the bridge: ..1..2..3..4..5.. addif tap0 .. addif tap1 ..7..8 done!
Formed bridge br0_eth1 attached over eth1...

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
:> 5

Div

class	pagebreak

Now enter "5" to see the created virtual interfaces:

Interfaces   Dedicated to    State
----------   ------------    ------------
eth0         host            connected to host
eth1         bridge          connected to bridge
lo           host            unmanaged from host
tap0         bridge          connected to bridge
tap1 bridge          connected to bridge
==================================================================
bridge name     bridge id STP enabled        interfaces
br0_eth1        8000.525400698995a no                 tap0
                                                       tap1

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
:> E

In the example above we see 2 virtual network Interfaces "tap0" and "tap1" connected to the created bridge. The physical network interface "eth1" is used for the bridge to the virtual network interfaces.

...

Back to Table of Contents

Div

class	pagebreak

Removal of a virtual network

Login a root. Start "ncu" utility:

# ncu

Interfaces Dedicated to State ---------- ------------ ------------ eth0 host connected to host eth1 bridge connected to bridge lo host unmanaged from host tap0 bridge connected to bridge tap1 bridge connected to bridge

==================================================================
bridge name     bridge id STP enabled        interfaces
br0_eth1        8000.525400698995a no                 tap0
                                                       tap1

select action:

1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
:> 4

Enter "4" then enter the interface name that is a bridge to the Linux virtual network on this host ("eth1" in our example):

Specify the phys interface used for BRIDGE:eth1
Cleanup bridge br0_eth1 with ip over eth1...
Removing the bridge: ..1..2 delif eth1
delif tap0
delif tap1
..5..6..7..8 done!

select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
:> 6

Enter "6" to quit "ncu" utility.

...

Versions Compared

Old Version 8

New Version Current

Key

Anchor
mtd
mtd
'mtd' utility

Anchor
hasp_srm_view
hasp_srm_view
'hasp_srm_view' utility

Dedication of a host physical interface to CHARON

Removal of a virtual network

Page Comparison

Versions Compared

Old Version 8

New Version Current

Key

Anchormtdmtd'mtd' utility

Anchorhasp_srm_viewhasp_srm_view'hasp_srm_view' utility

Dedication of a host physical interface to CHARON

Removal of a virtual network

Anchor
mtd
mtd
'mtd' utility

Anchor
hasp_srm_view
hasp_srm_view
'hasp_srm_view' utility