Versions Compared

Old Version 8

changes.mady.by.user Kirill Nikolaev (Unlicensed)

Saved on

compared with

New Version Current

changes.mady.by.user Bruno Miretti

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: example corrected for Linux

Anchor
TopUtilPageTOCTopUtilPage
TOC
Include Page
KBCOMMON:KB-CSSstyle
KBCOMMON:KB-CSSstyle

...

This set of utilities is located in the "charoncp011CHARONCP012.vdisk" disk file in the "/opt/charon/disks" folder.

Supported OpenVMS versions (depending on platform support): OpenVMS 6.1 and above.

...


Issue the following commands to install the package (example given for OpenVMS V8.4):

$ @SYS$UPDATE:VMSINSTAL

...

* Are you satisfied with the backup of your system disk [YES]? YES
* Where will the distribution volumes be mounted: <device name>:[CHARONCP011CHARONCP012.KIT]

Enter the products to be processed from the first distribution volume set.
* Products: CHARONCP011 CHARONCP012

* Enter installation options you wish to use (none): <press enter>

...

Do you want to install this product [NO]? YES

...

* Where should the CHARONCP root directory be located ? [SYS$SYSDEVICE:[CHARONCP]]: <press enter>

...

* Do you want to purge files replaced by this installation [YES]? <press enter>


Div
classpagebreak


Select all the components included to the package:

                           Component Selection

Select the CHARONCP components you wish to install from the menu below.
An asterisk appears next to the packages that have already been
selected. You can remove a package from the list by selecting it
again. You may enter more than one selection by separating your
choices with commas.

1. [*] CHARONCP Guest Utility (REQUIRED)
2. [*] Compatability Utilities
3. [*] Install DCL Commands & Help

4. Exit

* Your choice [4]: 1,2,3

...

* Your choice [4]: 4

...

* Is this correct [YES]: <press enter>

...

* Products: <press enter>

        VMSINSTAL procedure done at hh:mn

$

Proceed with installation using all the default options.

Once the installation is completed, add the following line to the "SYS$STARTUP:SYSTARTUP_VMS.COM" ("SYS$STARTUP:SYSTARTUP_V5.COM" for VMS 5.5) file for the package to be loaded automatically at system startup:

$ @SYS$STARTUP:CHARONCP_STARTUP

After that the package will be loaded automatically on startup.

Back to the Table of Contents

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Performance optimization

CHARON takes 100% of host CPU even in case of idle state of guest OpenVMS operating system. To get rid of such resources consumption there is a specific option provided by CHARON Guest Utilities - "idle" mode.


$ CHARONCP SET IDLE /ENABLE

Loads the OpenVMS idle loop detection software. This allows CHARON to detect when the emulated CPU(s) are idle and use the host power saving instructions to reduce power usage.

$ CHARONCP SET IDLE /DISABLEUnloads the OpenVMS idle loop detection software.
Back to the Table of Contents

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Div
classpagebreak


Virtual tapes management

...

set <adapter name> container[<unit name>] = ".vtape" removable[<unit name>] = true

.

Warning
  • It is mandatory to set the "removable" parameter to "true"
  • The container name must either be ".vtape" (and nothing else) or a valid file name (Example: "/charon/tapes/mytape.vtape") with an existing folder
  • The container name length must not be more than 255 characters


Example:

set PKA container[600] = ".vtape" removable[600] = true

...

(info) If some tape container has been already specified in the CHARON configuratioon file use the command "CHARONCP SET MAGTAPE <device> /UNLOAD" to unload it first.

...

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Div
classpagebreak


Defining keys

...

(info) For more information refer to the OpenVMS DCL Dictionary (DEFINE/KEY section).

...

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Displaying version

$ CHARONCP SHOW VERSION

Displays the CHARONCP package version number and architecture. This can be useful for customers reporting issues with the CHARONCP software.

Example:

$ CHARONCP SHOW VERSION

CHARONCP version id is: V1.1

...

2



Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc