...
Parameter | rx_fifo_size |
---|---|
Type | Numeric |
Value | "rx_fifo_size" sets the receive FIFO size. The value is specified in Kb and, by default, is pre-calculated from the connected port’s size of the receive queue. Typically, you do not need to change the "rx_fifo_size" parameter. It is available for extended tuning and debugging purposes. |
Example
|
...
Parameter | rx_fifo_size |
---|---|
Type | Numeric |
Value | "rx_fifo_size" sets the receive FIFO size. The value is specified in Kb and by default is pre-calculated from the connected port’s size of the receive queue. Typically, you do not need to change the "rx_fifo_size" parameter. It is available for extended tuning and debugging purposes. |
Example
|
...
Example:
load DEMNA/DEMNA EXA |
DEMNA Ethernet DEMNA Ethernet controllers offer the following configuration parameters that can be specified using the "set" command:
...
Parameter | rx_fifo_size |
---|---|
Type | Numeric |
Value | The "rx_fifo_size" sets the receive FIFO size. The value is specified in Kb and, by default, is pre-calculated from the connected port’s size of the receive queue. Typically, you do not need to change the "rx_fifo_size" parameter. It is available for extended tuning and debugging purposes. |
Example
|
...
Parameter | rx_fifo_size |
---|---|
Type | Numeric |
Value | The "rx_fifo_size" sets the receive FIFO size. The value is specified in Kb and, by default, is pre-calculated from the connected port’s size of the receive queue. Typically, you do not need to change the "rx_fifo_size" parameter. It is available for extended tuning and debugging purposes. |
Example
|
...
Parameter | rx_fifo_size |
---|---|
Type | Numeric |
Value | The "rx_fifo_size" sets the receive FIFO size. The value is specified in Kb and by default is pre-calculated from the connected port’s size of receive queue. Typically, you do not need to change the "rx_fifo_size" parameter. It is available for extended tuning and debugging purposes. |
Example
|
...
Parameter | legacy_mode | |||
---|---|---|---|---|
Type | Boolean | |||
Value | If this parameter is set to "true" CHARON-VAX tries to use very first implementation of "packet_port" having certain restrictions such as inability to automatically change MAC address on given interface etc. This setting may be needed if CHARON-VAX runs in VMware environment for example. In other situations please do not change its default value ("false"). Example:
|
Example
|
Info |
---|
CHARON supports VLAN adapters. If for some reasons you are going to use them, proceed with their installation and configuration according to the network adapter's vendor's User's Guide and then use the resulting VLAN interface the same way as the regular network interface. |
...