...

• When typing text, press <ESC> once finished. In case you’re blocked, press also <ESC> before executing commands described below
• both editors use case sensitive commands

'vim' has also a graphical version named 'gvim'. If not installed, you can run: # yum -y install gvim

‘gedit’ graphical editor

‘gedit’ is a graphical text editor, users familiar with Windows notepad should not encounter difficulties to use it.

‘nano’ text editor

‘nano’ is a basic text editor, very simple to use and displaying available commands at the bottom of the screen. For example, to leave ‘nano’ , use ^X (press CTRL + X)

How to setup ‘ssh’ trusts between Linux and

...

HP-UX

Please note:

• The prompts will tell you where to execute the commands, "

...

• HPUX#" (root user) or "Linux#"  (root user)
• Remember Linux/Unix is case sensitive
• If hosts are not known by each other, fill the /etc/hosts file for example (using vi for example)
• linuxhost represents the name of your

...

• Charon server (can be any name you want)

...

• hpuxhost represents the hostname of your

...

• HP-UX virtual machine

• Generate the key

...

On the HP-UX system, enter the following commands if the folder does not already exist:

On the Linux server, enter:

...

Tru64# cd /.ssh2
Tru64# echo "Key linuxhost.pub" >> authorization

• Initialize the first ssh connection (answer 'yes' to confirm)

...

Linux# ssh tru64host date

then retry the same command to verify the trust is working.

...

...

On the HP-UX system, add the Linux server key to the authorized keys:

Perform a simple test on the Linux server:

If trying to execute a remote command on the Tru64 HP-UX system, a message telling "no matching cipher found" is displayed, the cipher has to be setup on the Linux server side in the /root/.ssh/config file:

How to install 'rsh' on RHEL 8

How to setup

...

‘rsh’ trusts between Linux and

...

HP-UX

Please note:

• The prompts will tell you where to execute the commands, "

...

• HPUX#" (

...

• root user) or "Linux#"  (root user)
• Remember Linux/Unix is case sensitive

...

• If hosts are not known by each other, fill the /etc/hosts file for example

...

VMS$ SET DEF SYS$LOGIN
VMS$ @TCPIP$CONFIG

...

...
* Create a new default server host key? YES: YES
     Creating private key file: TCPIP$SSH_DEVICE:TCPIP$SSH.SSH2]HOSTKEY
     Creating public key file: TCPIP$SSH_DEVICE:TCPIP$SSH.SSH2]HOSTKEY.PUB
...

...

Linux# ssh-keygen -t rsa


→ Do not specify a passphrase
Linux# ssh-keygen -e -f /root/.ssh/id_rsa.pub > /root/.ssh/linuxserver.pub

• Copy the generated file /root/.ssh/linuxserver.pub (or use copy/paste between putty session for example) to the VMS system in the SYS$SYSROOT:[SYSMGR.SSH2] directory
  If this folder does not exist, create it using the following command: $ CREATE /DIRECTORY SYS$SYSROOT:[SYSMGR.SSH2]

...

VMS$ SET DEF SYS$SYSLOGIN
VMS$ SET DEF SYS$SYSROOT:[.SSH2]
VMS$ OPEN/WRITE TMP AUTHORIZATION.

If the file already exists, use /APPEND instead of /WRITE
VMS$ WRITE TMP "KEY LINUXSERVER.PUB"
VMS$ CLOSE TMP

Do not forget the dot at the end of the authorization file name

...

...

• (using vi for example)
• linuxhost represents the name of your Charon server (can be any name you want)
• hpuxhost represents the hostname of your HP-UX virtual machine

Introduction

RSH executes commands on a remote host. It can be used to issue a shutdown on the Charon Tru64 virtual machine.

...

The RSH method requires the 'rsh' package. It can be installed using the following command:

Notes

On the Tru64 HP-UX system issuing the shutdown, create a proxy between the root user of the Charon server and the user.

Example ('ceres' is the Charon server name):

If the Charon server name is not known to the TCPIP database, edit the /etc/hosts file and add the server ip address and its name.

Ensure manual commands can be passed to the Tru64 HP-UX system from the Charon server.

Example ('pluto' is the Tru64 hostname):

If a "poll: protocol failure in circuit setup" is returned, the firewall settings have to be set to open ports 113 and 1022.

Please always refer to your network administrator when changing the firewall rules, commands below are given as example only.

Example for Red Hat Enterprise Linux 6.x servers:

...

# iptables -I INPUT -p tcp --dport 113 --syn -j ACCEPT

# iptables -I INPUT -p tcp --dport 1022 --syn -j ACCEPT

# service iptables save

Example for Red Hat Enterprise Linux 7.x and CentOS 7.x servers:

...

# firewall-cmd --permanent --new-service=Charon

# firewall-cmd --permanent --service=Charon --add-port=113/tcp

# firewall-cmd --permanent --service=Charon --add-port=1022/tcp

# firewall-cmd --get-active-zones

public

interfaces: ens34 ens35

# firewall-cmd --zone=public --permanent --add-service=Charon

# firewall-cmd --reload

How to setup ‘rsh’ trusts between Linux and OpenVMS

Introduction

RSH executes commands on a remote host. It can be used to issue a shutdown on the Charon OpenVMS virtual machine.

Pre-requisites

The RSH method requires the 'rsh' package. It can be installed using the following command:

...

Notes

RSH and REXEC services must be available on the OpenVMS virtual machine. This depends on the OpenVMS version and a valid UCX license is required.

To enable these services, run @SYS$MANAGER:TCPIP$CONFIG, select the "Client components" and then enable and start "REXEC and RSH" services.

Create a proxy between the root user of the Charon server and the user on the OpenVMS system issuing the shutdown.

Example ('ceres' is the Charon server name):

...

If the Charon server name is not known to the TCPIP database, use the following command to add it.

Example:

...

Copy charon_shutdown.com script located in the /opt/charon/utils folder to SYS$MANAGER:CHARON_SHUTDOWN.COM on the OpenVMS system (using copy/paste for example). This is required as if the shutdown is executed directly from the 'rsh' command directly, 'rsh' will not timeout when the shutdown will be completed and the virtual machine will not be stopped cleanly, it will timeout depending on the service settings.

Ensure manual commands can be passed to the OpenVMS system from the Charon server.

Example ('vms084' is the OpenVMS hostname):

...

If a "poll: protocol failure in circuit setup" is returned, the firewall settings have to be set to open ports 113 and 1022.

1011 to 1023.

Please always refer to your network administrator when changing the firewall rules, commands below are given as example only.Example for Red Hat Enterprise Linux 6.x servers:

...

...

Example for Red Hat Enterprise Linux 7.x and CentOS 7.x servers:

Shutdown guests with Expect tool

Introduction

In case SSH cannot nor RSH can not be used to perform clean shutdown of the guests, the "expect" tool can be used to connect to the console, perform the login operation and execute the shutdown command depending on the console status (at login prompt, shell prompt or SRM prompt).

The operations performed during the "expect" script execution are detailed in the VM management - Create/Edit guest stop script chapter.

 In this case the password is sent without encryption.

To facilitate use of "expect" for shutdown, an example is provided in the "guest_shutdown.exp" script located in the /opt/charon/utils folder. If you plan to customize the script, you'll have to create a copy and not use it directly as it will be overwritten in case of Toolkit upgrade.

Please note:

'telnet' and 'expect' packages must be installed in order to use this feature.

The following error message can be returned when stopping the virtual machine when trying to use the expect script example:

• if expect package is not installed: "Stop script returned error code 126".
• if telnet is not installed: "%EXPECT-F-NOSRM, Cannot continue, 'telnet' is not installed" then "Stop script returned error code 4"

Caution: the virtual machine process will be however killed by service management process

...

.

If console is locked:

Any active session to the console must be killed before the "expect" script is executed.

For example, if you are connected via "telnet" on the localhost/port (the kill is not done inside the expect script). Using the "/opt/charon/utils/charon_gstart_expect" script file the necessary operations will be performed.

If the console is locked from another host (if you use putty for example), you will have to cancel the connection by yourself otherwise the shutdown will not be performed cleanly.

...

This script can handle the following situations:

• No user connected on the console:
  
  • Expect: "Username: " (VMS) or "login: " (Tru64)
  • Action: An interactive session will be initiated based on <user> and <password> provided in the parameters
• A user is connected on the console:
  
  • Expect: <prompt> provided in the parameters
  • This user must have privileges to perform shutdown as no logout will be issued
  • Action: Depending on the Operating system parameter (see <opsys> below), the shutdown command will be sent
• Console is at SRM prompt:
  
  • Expect: ‘>>>’ (so works with VAX and Alpha with "P00>>>")
  • Action: A 'power off' command will be issued. If the command is not recognized, the F6 key will be sent (this must be enabled within the configuration file). If the F6 key did not stop the emulator, the script will exit with error code 9 meaning you will have to kill the emulator process yourself. Using the "/opt/charon/utils/charon_gstart_expect" script file the necessary operations will be performed.

Script usage

...

# path/script <port> <user> <password> <prompt> <opsys>

Parameters:

Example:

...

Example for HP-UX:

Example for MPEIX:

How to restart CHARON-

...

PAR on Linux automatically on failure

This part only applies to Linux distributions using systemd thus Red Hat Enterprise Linux 6.x versions are not concerned.

...

Automatic restart on failure is managed by systemd at Linux level, please refer to systemd man pages.

For example, edit the service configuration file and add the following parameters

...

: