...
To view or change the current virtual machine SCSI configuration, select SCSI in the Device column of the left-hand pane of the configuration Settings window. This opens the SCSI configuration window similar to the one shown below.
From this window, you can create virtual disk and tape container files using the Create Virtual Storage button. You can also attach virtual storage devices (both physical devices and container files) to the virtual machine (Add button). When selecting an existing virtual storage device, you can modify edit or remove it (Edit and Remove buttons are only visible if a device is selected) .
The Create Virtual Storage option is also available in the Tools menu of the Charon-SSP Manager. The functions provided are identical to the functions provided via the Virtual Machine Settings window shown above.
...
Before the disk can be used by the Solaris guest system, it must be added to the system configuration and formatted/labeled by the Solaris guest according to the customer specific requirements.
...
The Charon-SSP virtual machines offer additional options when adding physical disks as virtual SCSI devices. The windows for adding a new device and for editing an existing device contain the same fields. The configuration windows are different for Charon-SSP/4U/4V and Charon-SSP/4M because only Charon-SSP/4U and Charon-SSP/4V support a second SCSI bus. The two different configuration windows are shown below:
Add physical disk on Charon-SSP/4U/4V | Add physical disk on Charon-SSP/4M |
|
|
The following table describes the additional parameters available for physical disks on Charon-SSP:
...