...

General description

Charon-AXP supports emulation of PBXGA graphics card(s) by direct virtualization and provides a virtual console for displaying graphics.

The console starts automatically upon starting the emulator. Its resolution is 800 x 600 by default.

Support for AXP graphics is provided with two components:

...

• PBXGA graphics console cannot be used as the system console. Use OPA0 for this purpose.
• If PBXGA graphics card is going to be used, the resolution of CHARON host screen must be sufficient to provide ability to display the graphics console properly.
• If PBXGA graphics card is used, CHARON cannot configured, starting with version 4.12, Charon can now run as a service (so it and is not therefore compatible with the Linux Toolkit). It can however work Alternatively the emulator can also be run in detached mode (# <emulator exe> -d <configuration file>)
• If the window of the PBXGA graphics card console is closed by user or killed as a process, it will not re-appear automatically ( the Charon emulator will continue to work). In this situation the user has to restart the pbxga_tv program with the correct parameters, as defined in the configuration file, to restart the graphical display (see application 18401789411432 chapter further)

...

Example (more examples below):

On Charon startup a window will appear on CHARON host monitor to display graphics.

...

All the parameters described in the "Placement of peripheral devices on PCI bus" chapter, such as "bus", "device", "function", "irq", "irq_bus" are applicable for PBXGA graphics card.

Configuration parameters

size

cpu_draw

.

application

Parameter	application
Type	Text string
Value	Specifies the application to open for displaying the

graphical console

emulated graphics device. The pbxga_tv executable file is provided for this. It is located in the same folder as the Charon emulator executable file. Syntax: pbxga_tv -c <configuration_name> -n <device name(s)>

When several graphics cards are loaded, the <device name(s)> have to be separated by a pipe character and the application has to be defined for the latest loaded PBXGA card. See examples below. Note that correct consolidation is only possible when screens are of the same depth and size. Example: set GYA application = "pbxga_tv -c DS20 -n GYA" There is no need to supply display size to PBXGA_TV application. Using PanoramiX/XINERAMA extensions to DECwindows is also possible (topics of proper configuration OpenVMS/Tru64 are not covered here). These extensions allow to join multiple heads in one big virtual screen. The PBXGA_TV virtual display unit has special notation allowing to consolidate multiple frame buffers in single window (topology is flexible, to some extent): Screens are joined horizontally when separated by "|" Screens are joined vertically when separated by "/" Example: set GYD application = "pbxga_tv -c MYCONF -n GYA|GYB/GYC|GYD"

Div
class pagebreak

Using PBXGA_TV

General Information

The PBXGA_TV display unit starts in passive mode. It displays content of frame buffer but does not react on keyboard input and/or mouse movements. In order to switch it to active mode, place mouse cursor with the window and click once. When PBXGA_TV is active, mouse cursor is stuck to PBXGA_TV window. Press CTRL+

SHIFT

ALT+R to release.

The PBXGA_TV display unit starts in Window Mode. Use CTRL+

SHIFT

ALT+F to toggle Full Screen Mode.

The PBXGA_TV application uses

libsdl

the SDL2 library to draw its window.

On Linux libsdl package is prerequisite (checked by yum/rpm when Charon-AXP for Linux is installed). Note, that using

The PBXGA_TV

in VNC sessions is not suggested. There are known issues with mouse cursor

driver is statically linked with SDL2. You may need to install the "libdecor" package additionally.

Running PBXGA_TV remotely is not supported.

The

Please note: PBXGA_TV can only consolidate

screens belonging to the same virtual machine. It can't consolidate screens belonging to different machines

multiple screens from a single emulator instance.

Command-Line Parameters

The "pbxga_tv" application accepts the following parameters:

Parameter	Description
-c, --configuration-name <CONF>	Specify the configuration-name in the emulator configuration file
-n, --device-name <DEVICE>	Specify the device-name in the emulator configuration file
--guest-os <GUEST> -Tru64 -OpenVMS	Specify guest operating-system running in emulator. Values for <GUEST> are Tru64 or OpenVMS. -Tru64 and -OpenVMS are the same as --guest-os Tru64 and --guest-os OpenVMS
-u,--screen-update-period-ms <PERIOD>	Screen update period in milliseconds. If omitted, the default is 100

Multiple Screens

The PBXGA_TV application supports using multiple PBXGA adapters in screen consolidation mode, provided that guest OS is configured for PANORAMIX/XINERAMA extension. In order to join multiple PBXGA displays in a single window the value of device-name must list the desired device names as follows:

...

...

...