...
Example for OPA0 console ("COM1" port):
set COM1 alias=OPA0 |
Starting with Charon-AXP V4.11 build 204-13, the line above is optional. OPA0 is mapped by default to COM1.
Example when using the TTA0 console ("COM2" port):
...
General parameters
CHARON-AXP console lines COM1 and COM2 have the following parameters:
All the values in the following tables are case insensitive.
alias
| Parameter | alias | |||||
|---|---|---|---|---|---|---|
| Type | Identifier | |||||
| Value | This parameter is used to set an useful name for COM1 or COM2 ports. It can be any name, for example "Console1", but usually it is "OPA0" for COM1 and "TTA0" for COM2. This name is logged in CHARON log file, it can also be used for parametrization in CHARON configuration file along with "COM1" and "COM2" identifiers. The main purpose of this parameter is migration from old CHARON systems (which do not have the described implementation of consoles) to the current design, since it allows retaining the original name used for parametrization, since the rest of the parameters stay the same in both implementations.
Example:
|
| Div | ||
|---|---|---|
| ||
...
| Parameter | application |
|---|---|
| Type | Text string |
| Value | A command line for calling some host application for communication to Charon on a given COM line. Typically this parameter is used for mapping COM1 or COM2 or some "xterm" terminal emulator Example:
If "putty" terrminl emulator is going to be used as an option copy the following file to your home directory:
Example:
|
connection_override
| Parameter | connection_override |
|---|---|
| Type | text string |
| Value | "enable" Allows new connection to override existing connection, if any. Enabled connection override on OPA0 allows to intercept virtual serial console. When emulator detects new connection request on the port (10003 for the below example), it closes old connection, if any, and switches to the new one. Example: set COM1 alias = OPA0set OPA0 port = 10003 connection_override = enable This is implemented only for serial lines using the new syntax, not for lines using the legacy syntax (load virtual_serial_line ...). |
access_control
Available only since build 204-13
| Parameter | access_control |
|---|---|
| Type | text string |
| Value | " set XXX alias=YYY" syntax. Lines using the legacy syntax are not supported.disable" Since build 204-13, Incoming connection requests are by default filtered for virtual serial lines and then allowed only for the localhost. This is to avoid security scanners that can block the port. Example:
|
| Div | ||
|---|---|---|
| ||
Notes on "port" and "application" parameters
...
set COM1 alias=OPA0 port=10003 application="xterm -title OPA0 -e chterm -h 127.0.0.1:10003" |
In this example CHARON-AXP OPA0 console connects to port 10003 of localhost ("127.0.0.1") and at the same time it starts "xterm" with parameters "-title OPA0 -e chterm -h 127.0.0.1:10003", instructs it to connect to the port 10003 of the host with TCP/IP address "127.0.0.1" (localhost)
| Include Page | ||||
|---|---|---|---|---|
|
...
...
| class | pagebreak |
|---|
Mapping Serial line controllers to system resources
...
| Mapping | Type | Commentary |
|---|---|---|
"/dev/tty<N>" where N is from 0 to 11 | Linux virtual tty | Those tty devices must be free from the Linux "getty/mgetty" and similar programs (specified in "/etc/inittab") Example:
|
"/dev/ttyS<N>" where N is a number | Onboard serial lines | Example:
|
"/dev/tty<XXX>" where XXX is a complex letter/number notation | Proprietary (depending on a driver) devices | Example for a first port of a MOXA card:
Example for a first port of a DIGI card:
|
"/dev/ttyUSB<N>" where N is a number | Modem or USB serial lines adapters | Example:
|
OPA0 console configuration examples
Using legacy syntax (not recommended)
This example maps OPA0 to port 10003, enable F6 key (emulator stop) and logs the console input/output to a rotating log file in /charon/myaxp/logs folder:
|
Using new syntax (recommended)
This example maps OPA0 to port 10003, enable F6 key (emulator stop), logs the console input/output to a rotating log file in /charon/myaxp/logs folder and enables the connection_override feature:
|
| Include Page | ||||
|---|---|---|---|---|
|