| Anchor | ||||
|---|---|---|---|---|
|
| Include Page | ||||
|---|---|---|---|---|
|
...
CHARON-AXP supports DE435, DE450, DE500AA, DE500BA and , DE602 virtual and DE602AA virtual network adapters.
All of them are configured in a similar way:
|
load DE602/i8255x EIA interface=EIA0load packet_port/chnetwrk EIA0 interface="connection:Charon" |
In the example examples above the first line loads DE500BA/DE602 virtual adapter with a name "EWA"/"EIA" (note that "/i8255x" syntax must be used only in case of DE602 and DE602AA adapters); the following line maps it to host network interface having a name "Charon" ("connection" is a key word). Note that the mapping is performed in 2 steps:
- A mapping object "packet_port" with a name "EWA0"/"EIA0" is loaded and connected to host interface having a name "Charon", so CHARON-AXP will use this interface for its networking
- The loaded DE500BA virtual DE500BA/DE602 virtual adapter "EWA"/"EIA" is connected to the "packet_port" object "EWA0"/"EIA0".
It is possible to load several DE435, DE450, DE500AA, DE500BA or DE602 controllers, for example (for DE500BA):
|
...
Follow this link for details of KZPBA controllers configuration.
Back to Table of Contents
KGPSA-CA PCI FC disk controller
...
Follow this link for details of KGPSA-CA controllers configuration.
Back to Table of Contents
KGPSA-CA mapping to the host resources
...
Numbers in the square brackets represent KGPSA-CA units. They can be in the range 0..32766, but no more than 255 units can be configured on a single controller.
Back to Table of Contents
KGPSA-CA mapping to a storage controller using its "presentation" mode
...
| Type of mapping | Description |
|---|---|
| storage_controller_path_id = <Storage controller path ID> | "Storage controller path ID" is a storage (for example SAN) controller path ID. This ID can be obtained from the special utility "Host Device Check". Once specified, all the disks attached to the storage are automatically mapped as disk units to CHARON-AXP. |
Back to Table of Contents
KGPSA-CA pass through mode
...
| Supported | Not Supported | Not tested |
|---|---|---|
LP8000 | LPe1150 (FC2142SR, A8002A) | LPe11000 |
Back to Table of Contents
| Div | ||
|---|---|---|
| ||
|
FDDI support via DEFPA PCI FDDI controller in "pass through" mode
...
Non-US-EN installations of Windows may present “Location:” string in local language, but "host_bus_location" parameter requires English notation, so the words “PCI”, “bus”, “device”, and “function” must be specified in English.
Back to Table of Contents
| Div | ||
|---|---|---|
| ||
|
Serial lines support via emulated PBXDA-xx family PCI controllers in "pass through" mode
...