...

Prerequisites

As this description shows the basic setup of a Linux instance in OCI, it does not list specific prerequisites. However, depending on the use case, the following prerequisites should be considered:

• To set up a Linux instance in OCI, you need an OCI account.
• If this instance is to be used as a Charon host system, refer to the user's guide of your Charon product to determine the exact hardware and software prerequisites that must be taken into account for the Linux instance. The image you use for your instance and the instance type you chose determine which hardware and software your cloud instance has.
• If this instance is to be used as a Charon host system, a product license is required to run emulated systems. Contact your Stromasys representative or Stromasys VAR for details.
• Certain legacy operating systems that can run in emulated systems provided by Charon emulator products require a license of the original vendor of the operating system. The user is responsible for any licensing obligations related to the legacy operating system and has to provide the appropriate licenses.

OCI New Instance Launch

Please note: This section only shows a very basic example. Please refer to the Oracle Cloud documentation for more detailed information.

To start the creation of a new Linux cloud instance in OCI, perform the following steps:

Step 1: log in to your Oracle Cloud environment.

Step 2: go to the instance list in the compute section and select to create an instance.

Image Removed

This opens the Create Compute Instance window.

Step 3: on the first part of Create Compute Instance window, name your instance and select an appropriate Linux image for it.

 Image Removed

To select the correct image, select Change Image Source. This will allow you to browse the different available categories. 

The image below shows an example:

Image Removed

Selecting the image and confirming your selection will take you back to the Create Compute Instance window.

Step 4: on the middle part of the Create Compute Instance window, select the appropriate shape (i.e., the virtual Linux host hardware), the subnet membership of the instance and whether to assign a public IP address.

Image Removed

To select an appropriate shape conforming to the hardware requirements of the emulated SPARC system, click on Change Shape.

...

This will open a window where you can select the correct system type.

Image Removed

Confirming you selection will take you back to the Create Compute Instance window.

Step 5: on the bottom of the Create Compute Instance window configure your boot device as required and upload the public SSH key of the key-pair you will use to access your instance.

Image Removed

Click on Create to create your instance.

Step 6: verify your instance is running.

Your instance should now be visible in the list of compute instances.

...

Initial Access to the Instance

Once you have access to the instance, you can create the access you require for your applications. This section just shows the basic steps for initial access to the instance.

SSH Interactive Access

To connect to the instance interactively, you must connect as the management user of your instance. Use the following command:

$ ssh -o ServerAliveInterval=30 -i <path-to-your-private-key> <management-user-name>@<cloudhost-IP-address>

Please note:

• Depending on the type of connection, you will have to use either the public IP address of the cloud system or its address in a customer-specific VPN.
• The management user account normally allows sudo access to privileged commands (use sudo -i).

File Transfer with SFTP

SFTP enables file transfers to and from the cloud instance. Use the management user of your instance. The security rules must allow SSH access to allow SFTP access to the cloud instance.

Please note: Depending on the type of connection, you will have to use either the public IP address of the cloud system or its address in a customer-specific VPN.

To connect to the instance, use the following command:

$ sftp -i <path-to-your-private-key> <management-user>@<cloudhost-IP-address>