Include Page |
---|
| KBCOMMON:KB-CSSstyle |
---|
| KBCOMMON:KB-CSSstyle |
---|
|
...
size
Parameter | size |
---|
Type | Numeric |
---|
Value | Size of the emulated memory in MB. |
---|
...
The following table lists the values of emulated RAM for various hardware models of virtual VAX/PDP11 systems:
Hardware Model | RAM size (in MB) |
---|
| Min | Max | Default | Increment |
PDP1193 | 2 | 4 | 2 | 2 |
PDP1194 | 2 | 4 | 2 | 2 |
MicroVAX_II | 1 | 16 | 16 | 1,8,16 |
MicroVAX_3600 | 16 | 64 | 16 | 16 |
MicroVAX_3900 | 16 | 64 | 16 | 16 |
VAXserver_3600 | 16 | 64 | 16 | 16 |
VAXserver_3900 | 16 | 64 | 16 | 16 |
VAXserver_3600_128 | 32 | 128 | 32 | 32 |
VAXserver_3900_128 | 32 | 128 | 32 | 32 |
MicroVAX_3100_Model_96 | 16 | 128 | 16 | 16 |
VAXstation_4000_Model_90 | 16 | 128 | 16 | 16 |
VAX_4000_Model_106 | 16 | 128 | 16 | 16 |
VAX_6000_Model_310 | 32 | 512 | 32 | 32 |
VAXserver_3600_512 | 32 | 512 | 32 | 32 |
VAXserver_3900_512 | 32 | 512 | 32 | 32 |
MicroVAX_3100_Model_98 | 16 | 512 | 16 | 16 |
VAX_4000_Model_108 | 16 | 512 | 16 | 16 |
Hardware Model (cont.) | RAM size (in MB) |
---|
| Min | Max | Default | Increment |
VAX_4000_Model_700 | 64 | 512 | 64 | 64 |
VAX_4000_Model_705 | 64 | 512 | 64 | 64 |
VAX_6610 | 128 | 3584 | 128 | 128 |
VAX_6620 | 128 | 3584 | 128 | 128 |
VAX_6630 | 128 | 3584 | 128 | 128 |
VAX_6640 | 128 | 3584 | 128 | 128 |
VAX_6650 | 128 | 3584 | 128 | 128 |
VAX_6660 | 128 | 3584 | 128 | 128 |
Include Page |
---|
| KBCOMMON:DOC-GoToToc |
---|
| KBCOMMON:DOC-GoToToc |
---|
|
...
The KW11-L timer is used in PDP-11 system emulation. It supports a 50Hz, 60Hz and 70Hz frequency.
kw11 frequency
A time correction mechanism handles any time slips between the emulated and the host system time. The KW11-L frequency can be set in the configuration file as follows:
...
Parameter | ext_rom |
---|
Type | Text string |
---|
Value | Specifies a file containing external boot code |
---|
ext_rom_address
Parameter | ext_rom_address |
---|
Type | Numeric |
---|
Value | Specifies an offset to be used for the file specified by the ext_rom parameter |
---|
...
Parameter | container |
---|
Type | Text string |
---|
Value | A string specifying a file name to store the content of the EEPROM. Example: set eeprom container="vx6k610.rom" |
This command enables EEPROM parameters (e.g., default boot drive) to be automatically saved to a specified file. The EEPROM file is created in the directory in which CHARON-VAX starts. The EEPROM file is created or overwritten each time any parameter relevant to the EEPROM content is changed. it is recommended to specify the full path to this file
|
---|
Example:
set eeprom container="C:\Charon\my_virtual_system.rom" |
Include Page |
---|
| KBCOMMON:DOC-GoToToc |
---|
| KBCOMMON:DOC-GoToToc |
---|
|
...