...
Syntax for loading PBXDA-xx PCI serial adapter:
load digi <name> |
Example:
load digi SERIAL_A |
| Note | |
|---|---|
In AlphaStation 400 configuration use the following syntax for PBXDA-xx PCI serial adapter loading:
|
By default PBXDA-xx adapter uses first available PCI slot. If instead some particular slot is needed, refer to this section for details of specific placement of PCI peripherals on CHARON-AXP PCI bus.
| Div | ||
|---|---|---|
| ||
|
Configuration parameters
The PBXDA-xx PCI serial adapter emulation has only one configuration parameter:
...
Parameter
...
Type
...
host_bus_location
| Parameter | host_bus_location | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | Text String | ||||||||||
| Value | Establish connection between virtual PBXDA-xx PCI serial adapter and physical DIGI AccelePort PCI serial adapter installed on CHARON-AXP host (pass through mode) Syntax:
where:
Example:
|
...
| Div | ||
|---|---|---|
| ||
|
Mapping to host DIGI AccelePort PCI serial adapter
Open “Computer Management” application and select “Device Manager”:
| Div | ||
|---|---|---|
| ||
|
In the right panel select proper physical DIGI adapter:
| Div | ||
|---|---|---|
| ||
|
Open its properties sheet by double-clicking on the selected adapter:
The “Location:” on the above picture gives X, Y, and Z for the "host_bus_location" parameter, for example:
|
Non-US-EN installations of Windows may present “Location:” string in local language, but "host_bus_location" parameter requires English notation, so the words “PCI”, “bus”, “device”, and “function” must be specified in English.
...