Page Comparison

Anchor

	TOC
	TOC

Include Page

	KBCOMMON:KB-CSSstyle
	KBCOMMON:KB-CSSstyle

...

Software licenses

The CHARON-VAX / CHARON-PDP Software License (SL) is a "virtual" key with exactly the same functionality as the hardware dongle. It does not require any hardware but the installation of the Sentinel run-time environment is required.

Note

The Software Licenses (SL) are best suited for stable environments because their correct function depends on certain characteristics of the host system. Changing any of these characteristics will invalidate the license.

If the CHARON host runs on real hardware, the software licenses are by default tightly bound to the hardware for which they were issued. If major hardware characteristics of the system are changed, the license will be disabled.
If the CHARON host runs in a virtual environment (e.g. VMware), software licenses are normally bound to the virtual machine ID and a set of additional characteristics of the virtual machine. If any of these parameters are changed, the license will be disabled.

For a more detailed description of the restrictions, please refer to Software Licensing restrictions or contact your Stromasys representative.

Software licenses are always network-wide on Windows, so they behave the same way as Network HASP keys.

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Multiple licenses configuration and backup license

For any type of licensing, a CHARON VM can use only one valid ("active") license (of given vendor code) at a time.

The "HASP License details" utility (it can be started from CHARON Virtual Machines Manager) displays a range of available licenses but note that, by default, a CHARON VM may use any of them as the "active" one - unless it is directly specified by the "license_key_id" parameter (see below). The utility provides the license numbers and ID / IP addresses of the hosts where the licenses are installed.

The general recommendation is to avoid the usage of multiple keys in one network segment. Use only one locally installed license per host or one network license per local network segment containing several CHARON hosts.

When needed, it is possible to use a special parameter in the CHARON VM configuration files to specify exactly which license must be used by each particular CHARON VM:

Parameter

license_key_id

Type Text string

Value

A set of Sentinel Key IDs that specifies the license keys to be used by CHARON. It is also possibly to use a keyword "any" to force CHARON to look for a suitable license in all available keys if the license is not found in the specified keys.

Example:

set session license_key_id = "1877752571,354850588,any"

Based on the presence of this parameter in the configuration file, CHARON behaves as follows:

No keys are specified (the parameter is absent)
CHARON performs an unqualified search for any suitable key in unspecified order. If no key is found, CHARON exits.
One or many keys are specified
CHARON performs a qualified search for a regular license key in the specified order. If it is not found, CHARON exits (if the keyword "any" is not set).

If the keyword "any" is specified then if no valid license has been found in the keys with specified ID’s all other available keys are examined for valid license as well.

The order in which keys are specified is very important. If a valid license was found in the key which ID was not the first one specified in configuration file, then available keys are periodically re-scanned and if the key with the ID earlier in the list than the current one is found CHARON tries to find a valid license there and in case of success switches to that key.

This parameter also specifies the license which will be used as backup if the active license expires.

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

License installation

Installation from scratch

...

class	pagebreak

...

Installation of the Sentinel run-time environment on the CHARON-VAX / CHARON-PDP host (regular and network keys) or on the host that will distribute CHARON-VAX / CHARON-PDP licenses over a local network segment (network key only). The Sentinel software is installed automatically by CHARON-VAX / CHARON-PDP for Windows.
Physical connection of the HASP license dongle to the CHARON-VAX / CHARON-PDP host or to the host distributing the CHARON-VAX / CHARON-PDP license over the local network segment.
Collecting the system fingerprint (*.c2v file), sending it to STROMASYS and applying the update (*.v2c file) in case of software license (and in case of updating HASP dongle license). See the details below.

When a manual installation of the Sentinel run-time is required (in the case of the network license server that does not have CHARON-AXP installed):

Login as Administrator
Open the CHARON-VAX/PDP kit folder
Switch to the "hasp_install" subfolder
Unzip the archive "haspdinst.zip" located in this folder
Open "cmd.exe" and switch to the folder where the files were unzipped
Execute the following commands:

...> haspdinst.exe -fr -kp -nomsg
...> haspdinst.exe -install -cm
Extract the contents of this archive "hasplib.zip" to the same directory.
Copy the file "haspvlib_68704.dll" to "C:\Program Files (x86)\Common Files\Aladdin Shared\HASP" (in case of x64 host) or "C:\Program Files\Common Files\Aladdin Shared\HASP" (in case of x86 host)

Info

Note that the following operations have to be performed on installation phase for network licenses:

On the server side (where the network license will reside): open port 1947 for both TCP and UDP
On the client side, if broadcast search for remote licenses is to be used, UDP traffic from port 1947 of the license server to ports 30000-65535 of the client must be permitted.
Both on server and client sides: setup default gateway

Please consult with your Windows User's Guide on details.

If stricter firewall rules are required, it is possible to open the ports 30000-65535 and 1947 only for the "Sentinel HASP License Manager" (hasplms.exe) service (it will be installed by CHARON-VAX / CHARON-PDP).

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Replacement of currently installed Sentinel run-time

Replacement of the currently installed Sentinel Run-time can be needed in case of installation of specific run-time provided by STROMASYS.

To proceed, remove the current version of Sentinel run-time:
- Login as Administrator
- Extract the content of the unique ZIP file residing in “hasp_install” directory of the CHARON distribution to the same folder.
- Run “cmd.exe” from the “Start” menu of host computer
- “cd” to the “hasp_install” directory
- Issue the following command:
  
  ...> haspdinst.exe -fr -kp -nomsg
Install the other Sentinel run-time:
- “cd” to the directory where the target run-time resides
- Issue the following command:
  
  ...> haspdinst.exe -install -cm
- “cd” to the “hasp_install” directory
- Extract the contents of this archive "hasplib.zip" to the same directory.
- Copy the file "haspvlib_68704.dll" to "C:\Program Files (x86)\Common Files\Aladdin Shared\HASP" (in case of x64 host) or "C:\Program Files\Common Files\Aladdin Shared\HASP" (in case of x86 host)
.

Info
You do not need to perform this procedure for Sentinel HL keys - local and network ones (red dongle) used as local.

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Installation and update of CHARON-VAX/PDP Software License or HL/HASP dongle License

...

Install CHARON-VAX / CHARON-PDP together with Sentinel run-time (Sentinel run-time is an essential part of CHARON-VAX / CHARON-PDP for Windows distribution)
Reboot the host system
In case of Software License (SL) installation and if there are already installed network-wide SL's on the local network, disable access to the network licenses in the following way:
Open the CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "Sentinel Admin Control Center" button:
Image Removed
or - alternatively - go to the http://localhost:1947 page using your browser to access the "Sentinel HASP Admin Control Center" (ACC).

Select the "Configuration" option in the left pane then switch to the "Access to Remote License Managers" tab.

Uncheck the highlighted options:

Image Removed

Press the "Submit" button to apply the settings

Switch to the "Network" tab.

Set the "Network visibility" to "None":

Image Removed

Press the "Submit" button to apply the settings.

Do not forget to return these settings back after the software license installation.

Connect the HASP dongle to the host system (in case of update of a license located on a dongle)
Connect the HASP dongle to the host system (in case of update of a license located on a dongle)
Collect the CHARON-VAX / CHARON-PDP host fingerprint file ("*.c2v")
Open the CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "License Update tool" button to envoke the "License Update Service" utility:

.

In the utility dialog popup switch to the "Collect Status Information" tab (opened by default) then select:

"Installation of new protection key" in case of Software License if no Software License has been already installed on the host.
Example:

.

"Update of existing protection key" in case of HL/HASP dongle or Software License that has been already installed on the host and needs updating.

Div

class	pagebreak

Example:

Note

When using HASP dongles, select only the "Update of existing protection key" option.

In case of Software License use the "Installation of new protection key" option if the host does not have any Software License installed and the "Update of existing protection key" option if an already installed Software License has to be updated.

Press the "Collect Information" button. In the popup dialog choose the place to store the "Fingerprint.c2v" file and press the "Save" button:
Div
class pagebreak
A message should appear similar to this example, confirming the fingerprint has been collected successfully.
Send the ".c2v" file ("Fingerprint.c2v" in the example above) to STROMASYS
STOMASYS will send you a ".v2c" file in return. Put it somewhere on the CHARON-VAX / CHARON-PDP host.
Open up the "License Update Service" utility the way described above and open the "Apply License File" tab:
Div
class pagebreak

Press the "..." button beside the "Update File" edit-box. In the popup select the license file received from STROMASYS:

Press the "Open" button and apply the license.
Open the CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "Sentinel Admin Control Center" button:

or - alternatively - start any web browser on this system and go to the http://localhost:1947 page to access the "Sentinel HASP Admin Control Center" (ACC).
Div
class pagebreak
Ensure that the license appears in the “Sentinel Keys” menu.

...

or - alternatively - start any web browser on this system and go to the http://localhost:1947 page.

Example:

Image Modified

This example demonstrates that 4 license keys are available:

A network key ("HASP-HL NetTime") on the host "XEON4WAYW7"
A network key installed locally
An HASP-HL installed locally
A network-wide software license on the host "RH64"

The Sentinel Admin Control Center reports that there is one opened session on key #4. The other keys are not being used at the moment.

For a more detailed description of the Sentinel Admin Control Center, please refer to its "Help" section.

...

Disable remote keys access

A helpful feature of the Sentinel Admin Control Center is the ability to disable access to remote keys. If the network key is installed locally, access to the key from remote hosts can be disabled. The following examples demonstrate how this can be done.

...

Removing CHARON-VAX / CHARON-PDP software licenses

The following procedure must be applied to remove the software license (SL):

Open the CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "Sentinel Admin Control Center" button:

or - alternatively - start any web browser on this system and go to the http://localhost:1947 page.
In the "Sentinel HASP Admin Control Center" (ACC), select the "Sentinel Keys" option in the left pane and locate the target "Sentinel SL AdminMode" license.
Press the "Certificates" button at the right side of the SL description:

.
Div
class pagebreak
Note the name of the correspondent certificate in the "Certificates" section. The name is in the form of <KeyID>_base.v2c
Remove the corresponding certificate file in the "C:\Program Files\Common Files\SafeNet Sentinel\Sentinel LDK\installed\68704" folder.
Reboot the CHARON host.
Start the "Sentinel HASP Admin Control Center" (ACC) again to ensure the SL has been removed.

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

License Deinstallation

...

Versions Compared

Old Version 23

New Version Current

Key

Software licenses

Multiple licenses configuration and backup license

License installation

Installation from scratch

Replacement of currently installed Sentinel run-time

Installation and update of CHARON-VAX/PDP Software License or HL/HASP dongle License

Disable remote keys access

Removing CHARON-VAX / CHARON-PDP software licenses

License Deinstallation