Anchor

	TOC
	TOC

Include Page

	KBCOMMON:KB-CSSstyle
	KBCOMMON:KB-CSSstyle

...

To be able to perform a clean shutdown of your Tru64 or OpenVMS virtual machine, you will have either to use the provided scripts (see above) or to add your own shutdown scripts.

If you plan to use the "expect" utility, please read Tips and Tricks - Shutdown guests with Expect tool for more.

Basic knowledge of shell programming is needed to implement the clean shutdown / stop script.

Method Comments

expect

Requires you pass user and password to the script so that it can connect to the OPA0 console via "telnet" and execute the shutdown commands. The "guest_shutdown.exp" script, located in the /opt/charon/utils folder, can perform operations to:

log off a user connected on the console

run the shutdown if the prompt is detected,
enter a username/password to login if "

login

Console Login:"

or "username:"

is detected,
execute the shutdown command if the prompt is detected,
detect the

SRM prompt (>>>)

Main Menu or ISL prompt to issue the "

power off

exit" command

(AXP) or send the F6 key (AXP & VAX) if enabled

.

This method is useful if the virtual machine has no telnet connection available and cannot handle "rsh" and "ssh" remote connections. For more, please read Tips and Tricks - Shutdown guests with Expect tool.

Important notes:

For MPE/iX systems, this is the only available method. Username and password are then not necessary. A <CTRL-A> will be sent on the console then if the "=" prompt is detected the "SHUTDOWN SYSTEM" command will be sent (other cases are also taken into account like Main menu prompt, ISL> prompt or text garbage on the console)
Note any local existing connection to the console has to be killed before executing the expect script.
If the console is locked from an external connection or if the prompt is not detected after sending a carriage return, the expect script will fail.

rsh

Requires : a trust to be created between the Linux server and the

Tru64 or OpenVMS guest (proxy)

HP-UX guest to issue password free remote commands

if the virtual machine is running OpenVMS, the CHARON_SHUTDOWN.COM script, located in the /opt/charon/utils folder, has to be copied in the SYS$MANAGER folder on the OpenVMS machine

. For more, please read the Tips and Tricks chapter dedicated to rsh trusts.

If 'rsh' is not installed on the Linux server, please run "# yum install rsh" (CentOS7/RHEL7) or "dnf install rsh" (CentOS8). For RHEL 8, please read the Tips and Tricks chapter dedicated to rsh installation on RHEL8.

ssh

Requires : a secured trust to be created between the Linux server and the

Tru64 or OpenVMS

HP-UX guest (key pair) to issue password and passphrase free remote commands

if the virtual machine is running OpenVMS, the CHARON_SHUTDOWN.COM script, located in the /opt/charon/utils folder, has to be copied in the SYS$MANAGER folder on the OpenVMS machine

. For more, please read the Tips and Tricks chapter dedicated to ssh trusts.

Div

class	pagebreak

Info

title	Note for Red Hat Enterprise Linux 7.x and CentOS 7.x

If your application and server

...

need time to shutdown, it could be necessary to give more time in the service definition to prevent from the service stop procedure to fail due to timeout.

To do so, open the "Manage 'systemd' services" option and edit the service configuration file. You can then add the TimeoutStopSec= parameter in the Service section. The default value is 20 minutes and can be changed in the preferences menu options.

Example:

[Service]...
TimeoutStopSec=3min

More information can be found using the "# man systemd.service" command on your Linux server

Options

Options 1 to 5 3 are explanations on how to setup and prepare the virtual machine and the Charon Linux server (if necessary) to use the three available methods.
Option 6 4 edits the script. This script is in a form of "case in <configuration filename> do ..."
Option 7 5 is used to test the script. Use with caution on production machines.

...

You'll find in options 1 to

...

3 all the details to setup the remote connection: packages to install, proxy settings for rsh, key pair definition for ssh (password and passphrase free), the necessary firewall settings if needed, etc...

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

...

When the script is initialized using option 6 or when a new virtual machine is added, the following lines are added:

...

# Parameter $1: contains full path to cfg file# Parameter $2: contains full path to emulator exe file## Important notes:# - comments & commands must be on separate lines# - respect the structure of the file with case/in/esac# - only place your commands between the selection and the ';;' line#. /opt/charon/utils/charon_common#case "$1"in <configuration file>) #-- Uncomment and complete one of the following lines: #\$#${CHARONDIR}/utils/charon_gstop_expect \ $1 \ $2 root <password> "<prompt>" <TRU64<HPUX/VMS>MPEIX> #\$#${CHARONDIR}/utils/charon_gstop_rsh \ $1 \ $2 <hostname> <TRU64<HPUX/VMS>MPEIX> #\$#${CHARONDIR}/utils/charon_gstop_ssh \ $1 \ $2 <hostname> <TRU64<HPUX/VMS>MPEIX> #/<path>/<myscript> ;;

...

esac

One of the blue colored lines above has to be uncommented depending on the method chosen. Other lines can remain in the script or can be deleted.

...

The values between the < and > signs have to be filled manually.
The operating system must be set to either TRU64 HPUX or VMS MPEIX (case insensitive).
If the "rsh" or "ssh" method is used, the <hostname>, corresponding to the virtual machine hostname, must be known by the Charon Linux server.
if MPEIX is defined, only the "expect" method can be used. Username, password and prompt can be set to "X" as they are not needed. Example: ${CHARONDIR}/utils/charon_gstop_expect \$1 \$2 X X X MPEIX

Stop script content example:

The editor defined in the Preferences is used to edit the script.

...

#
. /opt/charon/utils/charon_common
#
case "$1"
in
/charonRP7400/rp7400.

...

cfg)
    ${CHARONDIR}/utils/charon_gstop_ssh $1 $2 rp7400 HPUX
    ;;
*)
    echo "Invalid parameter '$1'"
    exit 1
    ;;
esac

Div

class	pagebreak

Stop script execution example with "ssh" on Red Hat Enterprise Linux 7.5/ HP-UX 11.23:

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Div

class	pagebreak

Stop script execution example with "expect" / MPEiX:

Image Added

Provided shutdown scripts explanation

...

title	Note for Red Hat Enterprise Linux 7.x and CentOS 7.x

Whatever the shutdown script execution result is, the stop request sent by the systemctl command will stop the emulator. It is very important then to ensure the stop script has been tested and validated.

charon_gstop_expect

Check if there's an active connection to the console on the local host, kill if any.
Execute the /opt/charon/utils/guest_shutdown.exp expect script with the values provided: username (root), password, prompt (for HP-UX only), operating system (either TRU64 HPUX or VMSMPEIX). This script is able to send the shutdown command depending on the returned characters on the console. This can be the SRM prompt ">>>", the "login:" or "username:" prompts or the prompt of the logged in user.
Report all output to /opt/charon/log/console.stop.<guest name>.log.

Notes:

With Charon-AXPIf the "Main Menu" prompt is found, the "power offexit" command is sent at the SRM promptWith Charon-VAX, the "power off" command does not exist. To power off the virtual machine, the F6 key has to be enabled in the configuration file (set OPA0 stop_on="F6"). If not set, the emulator process is killedto stop the emulator.
If the "ISL>" prompt is found, a "reset" command is sent then waits for the "Main Menu" prompt and sends the "exit" command is sent to stop the emulator.
If the console is locked from an external connection or if the prompt is not detected after sending a carriage return, the expect script will fail.

Div

class	pagebreak

charon_gstop_rsh

Check the guest can be reached via ping, if yes:
- Issue the shutdown command via "rsh" (depends on the operating system),
- Wait for a few seconds
- Check if the guest can be "pinged" and repeat with an interval of 5 seconds
- If the guest cannot be pinged, assume the shutdown procedure is complete
Kill the emulator process (Red Hat Enterprise Linux 6.x) or use the service kill command (RHEL 7.x and CentOS 7.x). and reset the service state. The shutdown commands does not power off nor stop the emulator process, that's why this operation is needed
Report the stop information within the guest log file

...

Check the guest can be reached via ping, if yes:
- Issue the shutdown command via "ssh" (depends on the operating system),
- Wait for a few seconds
- Check if the guest can be "pinged" and repeat with an interval of 5 seconds
- If the guest cannot be pinged, assume the shutdown procedure is complete
Kill the emulator process (Red Hat Enterprise Linux 6.x) or use the service kill command (RHEL 7.x and CentOS 7.x). and reset the service state. The shutdown commands does not power off nor stop the emulator process, that's why this operation is needed
Report the stop information within the guest log file

...

Optional guest display status script

It is possible to create a script, "/opt/charon/utils/charon_gstart.chkrun" (an example is provided in the 'charon_gstart.chkrun.example' file) that will add a status line while displaying the guests list for running guests only. This script, if needed, has to be created manually and must be executable.

...

file

...

Display output example from the "vmlist" command:

Image Removed

...

In this example, we use "ssh" to display the guest "uptime" and the result of the "uname -nr" command (name of the node + release number of the operating system)

The last 2 lines containing the RETVAL variable are mandatory

To create the script, the following commands were executed to copy the provided example to the one that will be used:

...

# cp /opt/charon/utils/charon_gstart.chkrun.example /opt/charon/utils/charon_gstart.chkrun

# vim /opt/charon/utils/charon_gstart.chkrun

# chmod 744 /opt/charon/utils/charon_gstart.chkrun

Image Removed

Example file provided (contains example for Tru64 and OpenVMS):

...

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Versions Compared

Old Version 19

New Version Current

Key

Options

Provided shutdown scripts explanation

charon_gstop_expect

charon_gstop_rsh

Optional guest display status script

Page Comparison

Versions Compared

Old Version 19

New Version Current

Key

Options

Provided shutdown scripts explanation

charon_gstop_expect

charon_gstop_rsh

Optional guest display status script