...
Console Parameters
CHARON-AXP console line TTA0 (COM2) has the following parameters:
All the values in the following tables are case insensitive.
communication
| Parameter | communication |
|---|---|
| Type | Text string |
| Value |
|
line
| Parameter | line | |
|---|---|---|
| Type | Identifier | |
| Value | This parameter is used to connect a particular serial line mapping interface to the controller. Example:
|
Example
|
...
| Parameter | break_on | ||||
|---|---|---|---|---|---|
| Type | Text string | ||||
| Value | Specifies what byte sequences received over the physical serial line will trigger a HALT command. This parameter works only for the console line. Specify the following values: "CrtlCtrl-P" , "Break" or "none" ("none" disables triggering a HALT condition).
Example:
The default value is "Break".
|
This parameter can be specified only for COM1 (OPA0) console...
| Parameter | break_on | ||||
|---|---|---|---|---|---|
| Type | Text string | ||||
| Value | Specifies what byte sequences received over a virtual serial line triggers a HALT command. Specify one of the following values: "CrtlCtrl-P" , "Break" or "none" to disable triggering a HALT condition. The commands are case insensitive.
Example:
The default value is "Break".
|
...