Versions Compared

Old Version 14

changes.mady.by.user Bruno Miretti

Saved on

compared with

New Version Current

changes.mady.by.user Bruno Miretti

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Div
classpagebreak


SHAC host adapter

To connect an emulated VAX 4000 model 106, 108, 700 and 705 node to a virtual DSSI network, the CHARON-VAX configuration must load at least one emulated SHAC host adapter.

...

A virtual SHAC has the following configuration parameters:

port

Parameter

port[N]

N=0…7

TypeNumeric
Value

An integer value that specifies the TCP/IP port number on which the emulated SHAC host adapter listens for connections from another emulated SHAC host adapter with DSSI node id: N.

Possible values are from 1024 through 32767.

Initially not set.

host

Parameter

host[N]

N=0…7

Type

Text String

Value

A string value that specifies the TCP/IP hostname (and optionally the TCP/IP port number) to connect to another emulated SHAC host adapter with DSSI node id: N.

The syntax for the string is “host-name[:port-no]”, with possible values for port-no in the range of 1024 through 32767.

Initially not set.

scs_node_name

Parameter

scs_node_name[N]

N=0…7

TypeText String
Value

A string value that specifies the SCSNODENAME of the emulated storage element. This string can contain up to 6 characters. Possible characters are uppercase letters A through Z and integers 0 through 9.

Initially set to an arbitrary value that is guaranteed to be unique within the running emulated VAX 4000 model 106, 108, 700 or 705 node.


Div
classpagebreak


scs_system_id

Parameter

scs_system_id[N]

N=0…7

Type

Numeric

Value

An integer value that specifies the SCSSYSTEMID of the emulated storage element.

Initially set to an arbitrary value that is guaranteed to be unique within the running emulated VAX 4000 model 106, 108, 700 or 705 node.

...

mscp_allocation_class

Parameter

mscp_allocation_class[N]

N=0…7

TypeNumeric
Value

An integer value that specifies the ALLOCLASS of the emulated storage element.

Possible values are from 0 through 255.

Initially set to 0 which means no allocation class assigned.


Div
classpagebreak


container

Parameter

container[N]

N=0…7

TypeText String
Value

A string value that specifies the container of the storage element with DSSI node id: N and MSCP unit number: N. This storage element might be either a (virtual) disk or tape. In VMS, running on an emulated VAX 4000 model 106 or 108 node, these storage elements appear as DSSI disks (DIAN:) or DSSI (TF86) tapes (MIAN:).

Possible values of the parameter are strings in one of the following forms:

  • Physical disk drives
    • "\\.\PhysicalDrive<X>", where X is 0, 1, …
    • "\\.\PhysicalDrive(DevID =XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX)"

      DevID addresses the target physical disk by its WWID (hexadecimal 128-bit identifier assigned to the disk drive by its manufacturer/originator).

      Example:

      Div
      classsmall

      set PAA container[2]="\\.\PhysicalDrive(DevID= 6008-05F3-0005-2950-BF8E-0B86-A0C7-0001)"


      .The WWID values can be obtained from "Host Device Check" utility ("All drives" section).

      Note

      If the "Host Device Check" utility does not display any WWID, this means the target disk does not have one. Use the "\\.\PhysicalDrive<N>" mapping in this case.


  • iSCSI disks
    • "\\.\PhysicalDrive(iScsiTarget = <iSCSI target>, LUN = <LUN number>)"

      iScsiTarget addresses the disk by its iSCSI target name. LUN specifies LUN on connected iSCSI disk. 

      Example:

      Div
      classsmall

      set PAA container[3]="\\.\PhysicalDrive(iScsiTarget= iqn.2008-04:iscsi.charon-target-test1, LUN= 1)"

      .

  • Physical tape drives recognized by Windows
    • "\\.\Tape<X>", where X is 0, 1, …
      ..
  • Floppy drives
    • "\\.\A:" or
    • "\\.\B:"
      .
  • CD-ROM drives (read-only)
    • "\\.\CdRom<X>", where X is 0, 1, …
      .
  • CHARON-VAX disk images
    • [<drive>":\"<path-name>"\"]<file-name>[".vdisk"]
      .
  • CHARON-VAX tape images

    • [<drive>":\"<path-name>"\"]<file-name>".vtape"
      .

This parameter is initially not set, thus creating NO storage elements on the bus with corresponding DSSI node id.

...

Div
classpagebreak


media_type

Parameter

media_type[N]

N=0…7

Type

Text String

Value

Overrides default (automatically determined) MSCP media type of the device.

Syntax:

"<device-name>,<device-type>"

where:

  • <device-name> is either: “DU”, “MU”, “DK”, “MK”, “SCSI”, “DI”, “MI”, “DSSI”, “DJ” or “MJ”

  • <device-type> is the form of: “LLD” or “LLLD”, where “L” is a letter from A through Z, and “D” is a decimal number from 0 through 99

If not specified, the device name is set to “DI”, and the device type is selected based on disk size for the disk storage elements. For tape storage elements, the device name and type are set to “MI” and “TF86”, respectively.

Initially not specified.

geometry

Parameter

geometry[N]

N=0…7

TypeText String
Value

This formatted string value specifies the explicit geometry of the disk storage element with DSSI node ID: N and MSCP unit number: N. This parameter is not applicable to tape storage elements.

The string format is <X>”/”<Y>[“/”<Z>] where:

  1. X is the number of sectors per track

  2. Y is the number of tracks per cylinder

  3. Z (optional) is the number of cylinders on the unit. If omitted, Z is calculated based on X, Y and the total number of sectors on the unit that reflects the size of the disk storage element

If this parameter is not set, CHARON-VAX will configure the geometry based on the most probable disk type.

Initially not set.

The syntax above is applicable only to disk storage elements.

If the container is a tape image, the following format is used:

Syntax:

"<image-size>[, <early-warning-zone-size>]"

where:

  • <image-size> is the tape size in MB

  • <early-warning-zone-size> is the size (in KB) of the space left on the tape when a warning to the OS is issued. If omitted, 64K is assumed.

...

Div
classpagebreak


use_io_file_buffering

Parameter

use_io_file_buffering[N]

N=0…7

Type

Text String

Value

Instructs CHARON-VAX to enable host operating system I/O cache on reading/writing operations.

The following values are possible:

  • "true" or "write-back" - the "write back" caching mode is used

  • "write-through" - the "write through" caching mode is used

  • "false" - caching is switched off

(info) Note that this caching has a significant effect only in case of mapping to disk and tape containers, not physical drives.

When enabled, host operating system I/O cache may significantly improve I/O performance of the virtual system. At the same time maintaining I/O cache requires additional host resources (CPU and memory) which may negatively affect overall performance of the virtual system.

Initially is set to "false".

Example:

set PAA use_io_file_buffering[0]=true


These parameters are configured with the "set" command.


Example: Standalone VAX system with 2 virtual DSSI disks on a PAA SHAC controller


Div
classcommandline

set session hw_model="VAX_4000_Model_108"
load virtual_serial_line/chserial OPA0 port=10003 application="putty.exe -load OPA0"
set quart line[3]=OPA0
set PAA container[0]="C:\Charon\Disks\dia0-rz24-vms-v6.2.vdisk"
set PAA container[1]="C:\Charon\Disks\dia1-rz24-vms-v6.2.vdisk"



The emulated VAX 4000 model 106 or 108 can then boot VMS with the following command:

>>> BOOT DIA0

After logging into VMS, the “SHOW DEVICE D” command displays the following:

$ show devices d
Device                 Device           Error   Volume         Free  Trans Mnt
  Name                  Status           Count    Label        Blocks Count Cnt
004200$DIA0:           Mounted              0   DSSI01         32022   147   1
004201$DIA1:           Online               0


Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc
Div
classpagebreak


HSD50 storage controller

To connect a storage controller to the virtual DSSI network, the CHARON-VAX configuration file must load at least one emulated HSD50 storage controller. In most cases one emulated HSD50 storage controller per virtual DSSI network is enough. The CHARON-VAX configuration file must supply a unique reference name for that instance. Even though this name is only valid within the configuration file, it is recommended, for clarity, to use the VMS SCSNODENAME as the instance name.The line below loads an emulated HSD50 storage controller, assigns it the instance name SCSNODE and connects it to the primary built-in DSSI controller:


load HSD50 MYDISKS dssi_host=PAA

The HSD50 emulation has the following configuration parameters:

dssi_host

Parameterdssi_host
TypeText String
ValueA string value that specifies the instance name of an emulated SHAC host adapter serving the virtual DSSI network.If this value is not set, CHARON-VAX will try to locate the host adapter automatically. This automatic lookup works only if the CHARON-VAX configuration has exactly one instance of an emulated SHAC host adapter.

dssi_node_id

Parameterdssi_node_id
TypeNumeric
ValueAn integer value that specifies the address of an emulated HSD50 storage controller on the virtual DSSI network.Possible values are from 0 through 7 (initially set to 0).

scs_node_name

Parameterscs_node_name
TypeText String
ValueA string value that specifies the SCSNODENAME of the emulated HSD50 storage controller.The string can contain as many as 6 characters. Possible characters are uppercase letters: A through Z, and the integers: 0 through 9.Initially set to the name of the emulated HSD50 controller. Therefore, the name of the emulated HSD50 controller should follow the above rules.

scs_system_id

Parameterscs_system_id
TypeNumeric
ValueAn integer value that specifies the SCSSYSTEMID of the emulated HSD50 storage controller.Initially set to an arbitrary value that is guaranteed to be unique within the running emulated VAX 4000 model 106, 108, 700 and 705 node.


Div
classpagebreak


mscp_allocation_class

Parametermscp_allocation_class
TypeNumeric
ValueAn integer value that specifies the ALLOCLASS of the emulated HSD50 storage controller.Possible values are 0 through 255 (initially set to 0).

container

Parametercontainer[N]N=0…9999
TypeText String
Value
A string value that specifies the container of the storage element with MSCP unit number: N. This storage element might be either a (virtual) disk or tape. In VMS running on an emulated VAX 4000 node, these storage elements appear as HSX00 disks (DUAN:) or HST00 tapes (MUAN:).Possible values of the parameter are strings in one of the following forms:
  • Physical disk drives
    • "\\.\PhysicalDrive<X>", where X is 0, 1, …

    • "\\.\PhysicalDrive(DevID =XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX)"
      DevID addresses the target physical disk by its WWID
      (hexadecimal 128-bit identifier assigned to the disk
      drive by its manufacturer/originator).
      Example:

      Div
      classsmall
      set DISKS container[2]="\\.\PhysicalDrive(DevID= 6008-05F3-0005-2950-BF8E-0B86-A0C7-0001)"

      .The WWID values can be obtained from "Host Device Check" utility ("All drives" section)


      Note

      If the "Host Device Check" utility does not display any WWID, this means the target disk does not have one. Use the "\\.\PhysicalDrive<N>" mapping in this case.


  • iSCSI disks

    • "\\.\PhysicalDrive(iScsiTarget = <iSCSI target>, LUN = <LUN number>)"
      iScsiTarget addresses the disk by its iSCSI target name.
      LUN specifies LUN on connected iSCSI disk. 
      Example:

      Div
      classsmall
      set DISKS container[3]="\\.\PhysicalDrive(iScsiTarget= iqn.2008-04:iscsi.charon-target-test1, LUN= 1)"

      .

  • Physical tape drives recognized by Windows
    • "\\.\Tape<X>", where X is 0, 1, …
      .
  • Floppy drives
    • "\\.\A:" or
    • "\\.\B:"
      .
  • CD-ROM drives (read-only)
    • "\\.\CdRom<X>", where X is 0, 1, …
      .
  • CHARON-VAX disk images
    • [<drive>":\"<path-name>"\"]<file-name>[".vdisk"]
      .
  • CHARON-VAX tape images
    • [<drive>":\"<path-name>"\"]<file-name>".vtape"
      .
This parameter is initially not set, thus creating NO storage elements on the controller


Div
classpagebreak


media_type

Parametermedia_type[N]N=0…9999
TypeText String
Value

Overrides the default (automatically determined) MSCP media type of the device.

Syntax:

"<device-name>,<device-type>"

where:

  • <device-name> is either: “DU”, “MU”, “DK”, “MK”, “SCSI”, “DI”, “MI”, “DSSI”, “DJ” or “MJ”
  • <device-type> is the form of: “LLD” or “LLLD”, where “L” is a letter from A through Z, and “D” is a decimal number from 0 through 99
If not specified, the device name is set to “DI” and the device type is selected based on disk size for disk storage elements. For tape storage elements, the device name and type are set to "MI" and "TF86" respectively. 
Initially not specified.

geometry

Parametergeometry[N]N=0…9999
TypeText String
ValueThis formatted string value specifies the explicit geometry of the disk storage element with DSSI node ID: N and MSCP unit number: N. This parameter is not applicable to tape storage elements.The string format is <X>”/”<Y>[“/”<Z>] where:
  1. X is the number of sectors per track
  2. Y is the number of tracks per cylinder
  3. Z (optional) is the number of cylinders on the unit. If omitted, Z is calculated based on X, Y and the total number of sectors on the unit that reflects the size of the disk storage element

If this parameter is not set, CHARON-VAX will configure the geometry based on the most probable disk type.Initially not set.The syntax above is applicable only to disk storage elements.

If the container is a tape image, the following format is used:Syntax:

"<image-size>[, <early-warning-zone-size>]"

where:

  • <image-size> is the tape size in MB
  • <early-warning-zone-size> is the size (in KB) of the space left on the tape when a warning to the OS is issued. If omitted, 64K is assumed.

use_io_file_buffering

Parameteruse_io_file_buffering[N]N=0…9999
TypeText String
ValueInstructs CHARON-VAX to enable host operating system I/O cache on reading/writing operations.The following values are possible:
  • "true" or "write-back" - the "write back" caching mode is used
  • "write-through" - the "write through" caching mode is used
  • "false" - caching is switched off

(info) Note that this caching has a significant effect only in case of mapping to disk and tape containers, not physical drives.When enabled, host operating system I/O cache may significantly improve I/O performance of the virtual system. At the same time maintaining I/O cache requires additional host resources (CPU and memory) which may negatively affect overall performance of the virtual system.Initially is set to "false".

Example:

set DISKS use_io_file_buffering[0]=true


Div
classpagebreak



Example:

load HSD50 DISKS dssi_host=PAA dssi_node_id=5

The configuration file below emulates a VAX 4000 Model 108 node with one HSD50 storage controller serving two disks and another instance of an HSD50 controller that serves a tape drive to the VAX over a virtual DSSI:


Div
classcommandline

set session hw_model="VAX_4000_Model_108"
load virtual_serial_line/chserial OPA0 port=10003 application="putty.exe -load OPA0"
set quart line[3]=OPA0
load HSD50 DISKS dssi_host=PAA dssi_node_id=1
set DISKS container[0]="C:\Charon\Disks\dua0-rz24-vms-v6.2.vdisk"
set DISKS container[1]="C:\Charon\Disks\dua1-rz24-vms-v6.2.vdisk"
load HSD50 TAPES dssi_host=PAA dssi_node_id=2set TAPES container[3]="\\.\Tape0"


In this example we emulate two HSD50 instances. They are both connected to the same virtual DSSI bus, therefore we must assign them different DSSI node ID values.

The emulated VAX 4000 Model 108 can boot VMS with the following command:

>>> BOOT DUA0


After logging into VMS, the “SHOW DEVICE D” and "SHOW DEVICE M" command displays the following:


Div
classcommandline

$ show devices d
Device                 Device           Error    Volume         Free  Trans Mnt
  Name                  Status           Count     Label        Blocks Count Cnt
DISKS$DUA0:           Mounted              0      DSSI01       31932   147   1
DISKS$DUA1:           Online               0
$ show devices m
Device                 Device           Error    Volume         Free  Trans Mnt
 Name                  Status           Count     Label        Blocks Count Cnt
TAPES$MUA3:           Online               0


Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc