Versions Compared

Old Version 14

changes.mady.by.user Bruno Miretti

Saved on

compared with

New Version Current

changes.mady.by.user W.Erber

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Preparation for PDF export

Anchor
TOC
TOC
Include Page
KBCOMMON:KB-CSSstyle
KBCOMMON:KB-CSSstyle

...

The numbers in the square brackets represent line number on the virtual PBXDA adapter starting from 0.

Controller typeMaximum number of lines
PBXDA 2
PBXDA_BA4
PBXDA_BB8
PBXDA_AC16

...


All the parameters described in the "Placement of peripheral devices on PCI bus", such as "bus", "device", "function", "irq", "irq_bus" are applicable for PBXDA controller.


Div
classpagebreak


Please note:

DIGI drivers for OpenVMS and Tru64 are sensitive to PBXDA location on PCI, therefore it is recommended to fix PBXDA location with explcit configuration.

...

Example:

load

...

PBXDA

...

TXA

...

bus=pci_1

...

device=4

...

function=0


Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Configuration parameters

The PBXDA serial lines adapter emulation has the following configuration parameters:

port

Parameterport
TypeText String
Value

Specifies a local port for incoming telnet connections

By default the "port" configuration option is not specified.

Syntax:

port[line-number]=<local port>

Example:

set TXA port[2]=17060


Div
classpagebreak


line

  • "/dev/tty<N>"
Virtual
  • for virtual console
  • "/dev/ttyS<N>"
Onboard
  • for onboard serial lines
  • "/dev/ttyUSB<N>"
Modem
  • for modem or USB serial lines adapters
  • "/dev/tty<XXX>"
Proprietary
  • for proprietary (depending on a driver) devices such as DIGI or MOXA cards

Example:

set TXA line[2]="/dev/ttyS1"

Please note:

  • If a virtual console "/dev/tty<N>" is going to be used, it must be freed from all the processes running on it at first. Refer to your OS documentation for details, also some description on how to do it is available here.
note
  • A specific account for running CHARON ("charon") does not allow usage of physical consoles "/dev/tty<N>" as CHARON consoles. If you plan to map CHARON console to "/dev/tty<N>" use only "root" account for CHARON running.


Parameterline
TypeText string
Value

A defined TTY port on host system:

SyntaxDescription

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Div
classpagebreak


log


Parameterlog
TypeText string
Value

The optional log file or directory name is where the log file for the serial line is stored.

Example:

set TXA log[0]="/charon/logs/txa0.log"


"ttyY" notation specifics

Note that the "ttyY" notation can have different forms depending on the nature of the device used:

MappingTypeCommentary

"/dev/tty<N>"

where N is from 0 to 11

Linux virtual tty

Those tty devices must be free from the Linux "getty/mgetty" and similar programs (specified in "/etc/inittab")

Example:

"/dev/tty1"

"/dev/ttyS<N>"

where N is a number

Onboard serial lines

Example:

"/dev/ttyS1"

"/dev/tty<XXX>"

where XXX is a complex letter/number notation

Proprietary (depending on a driver) devices 

Example for a first port of a MOXA card:

"/dev/ttyR01"

Example for a first port of a DIGI card:

"/dev/ttyaa"

"/dev/ttyUSB<N>"

where N is a number

Modem or USB serial lines adapters

Example:

"/dev/ttyUSB1"

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc