Page Comparison

If log rotation is enabled, the log_file_size parameter determines the log file size threshold at which the log is automatically rotated.

• "unlimited" or "0" (default) - the feature is disabled
• "default" - default size is used (4Mb)
• <size>[KMG] - size of the current log file in bytes with additional multipliers:

  • K - Kilobyte - multiply by 1024

  • M - Megabyte - multiply by 1024*1024

  • G - Gigabyte - multiply by 1024*1024*1024

Examples:

 Minimum log file size is 64K, maximum is 1G. Setting size less then 64K effectively makes the log file unlimited.

Specifies what byte sequences received over virtual serial line must trigger HALT command.

This parameter works only for console line (for CHARON-VAX it is the only line of UART and the "line[3]" of QUART).

Specify the following values: "Ctrl-P", "Break" or "none" to disable triggering HALT condition.

Example:

If log rotation is enabled, the log_file_size parameter determines the log file size threshold at which the log is automatically rotated.

• "unlimited" or "0" (default) - the feature is disabled
• "default" - default size is used (4Mb)
• <size>[KMG] - size of the current log file in bytes with additional multipliers:

  • K - Kilobyte - multiply by 1024

  • M - Megabyte - multiply by 1024*1024

  • G - Gigabyte - multiply by 1024*1024*1024

Examples:

 Minimum log file size is 64K, maximum is 1G. Setting size less then 64K effectively makes the log file unlimited.