| Anchor |
|---|
| TopNetPageTOCTopNetPage |
|---|
| TOC |
|---|
|
| Include Page |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
|
...
| Info |
|---|
The interface name can be either "(disabled)" for a disabled interface or "<network interface name>" Examples: load packet_port/chnetwrk NIC1 interface="(disabled)"
load packet_port/chnetwrk
|
|
...
Network booting is supported with exception of VAX6xxx models.
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
SGEC Ethernet Controller
The built-in SGEC controller emulator ("eza") has the following parameters that are specified with the "set" command:
...
| Div |
|---|
| load packet_port/chnetwrk EZA0 interface = "eth0"
set EZA interface = EZA0
set EZA station_address="0C:FE:35:AA:67:3B"
|
|
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
DEQNA / DESQA / DELQA Ethernet Controller
...
| Div |
|---|
| load DESQA/DEQNA QNA interface = QNA0
set QNA station_address="0C:FE:35:AA:67:3B"
load packet_port/chnetwrk QNA0 interface = "eth0"
|
|
Back to Table of Contents
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
DEMNA Ethernet Adapter
...
| Div |
|---|
| load DEMNA/DEMNA EXA xmi_node_id = 11 interface = EXA0
set EXA station_address = "0C:FE:35:AA:67:3B"
load packet_port/chnetwrk EXA0 interface = "eth0"
|
|
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
DEBNI Ethernet Adapter
CHARON-VAX/63X0 systems provide support for the DEBNI Ethernet controller.
...
| Div |
|---|
| load DEBNI/DEMNA EXA vax_bi_node_id = 11 interface = EXA0
set EXA station_address = "0C:FE:35:AA:67:3B"
load packet_port/chnetwrk EXA0 interface = "eth0"
|
|
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
PMAD-AA TurboChannel Ethernet Adapter
...
| Div |
|---|
| load PMADAA/PMADAA ECA interface = ECA0
set ECA station_address = "0C:FE:35:AA:67:3B"
load packet_port/chnetwrk ECA0 interface = "eth0"
|
|
Back to Table of Contents
Packet Port
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
Packet Port
The CHARON-specific "packet_port" interface establishes a connection between an Ethernet adapter in the Linux host system and a network adapter in the virtual VAX system.
...
| Div |
|---|
| load DEQNA/DEQNA XQA
load packet_port/chnetwrk XQA0 interface="eth0"
set XQA interface=XQA0
|
|
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
Supported Ethernet Q-bus Adapters for DECnet OSI (DECnet Plus)
...
| Info |
|---|
The integrated SGEC Ethernet "EZA" on MicroVAX 3100 & VAX 4000-106/108 is supported by DECnet OSI. The integrated ESA (AMD Lance 7990) device is not currently implemented in Charon-VAX. |
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
Ethernet Q-bus Adapter and Cluster configuration rules
...
The default DEQNA device is not supported for SCS Cluster protocol and the emulated VAX will fail with a CLUEXIT Bugcheck.
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|