Specifies a name of a file in which CHARON-VAX preserves time and date during its “offline” period.

This file also keeps some console parameters (such as default boot device).

By default it is left unspecified.

It is recommended to specify the full path to the file

Specifies the name of a file in which CHARON-VAX stores an intermediate state of its Flash ROM. 

This state includes, for example, most of the console parameters.

By default it is left unspecified.

It is recommended to specify the full path to the file

A string specifying a file name to store content of EEPROM .for VAX 6000 series

Example:

set eeprom container="vx6k610.rom"

This command enables EEPROM parameters (e.g., default boot drive) to be automatically saved to a specified file. 

The EEPROM file is created in the directory in which CHARON-VAX starts and is created or overwritten each time any parameter relevant to EEPROM content is changed.

It is recommended to specify the full path to the file

Determines whether the MicroVAX3100, VAXstation 4000, VAX6310 and VAX 4000 boot automatically if correct boot flags are set (and saved in the VAX console files).

The value is "reboot"

Example:

>>>set halt reboot

Determines whether the MicroVAX II, MicroVAX 3600, MicroVAX 3900, VAXserver 3600 and  VAXserver 3900 boot automatically if correct boot flags are set (and saved in the VAX console files).

The value is "auto"

Example:

set bdr boot=auto

Determines whether the CHARON VAX66x0 startup procedure stops at the ">>>" prompt after self-tests.

The values are:

Example:

set xmi boot = "auto"

The value "auto" enables automatic boot from a default boot specification previously configured in the VAX console.The value "manual" disables automatic boot once the self tests are passed.