When typing text, press <ESC> once finished. In case you’re blocked, press also <ESC> before executing commands described below
both editors use case sensitive commands

Request	Command
To quit without saving	Press ‘:’ then enter ‘q!’
To quit with saving	Press ‘:’ then enter ‘x’ or ‘wq’
Go to top of file	Press ‘:’ then enter ‘0’
Go to last line	Press ‘G’
Search pattern	Press ‘/’ then enter your search text. Press then ‘n’ for next (forward) or ‘N’ for backward
Remove current character	Press ‘x’
Insert text	Press ‘i’ (press ESC once text completed)
Insert line	Press ‘o’ for a line below cursor, ‘O’ for a line above cursor (press ESC once text completed)
Delete a line	Press ‘dd’

'vim' has also a graphical version named 'gvim'. If not installed, you can run: # yum -y install gvim

‘gedit’ graphical editor

‘gedit’ is a graphical text editor, users familiar with Windows notepad should not encounter difficulties to use it.

Request	Command
To quit	close the window by clicking on the cross top right corner
Save file	Press <CTRL-S>

Div

class	pagebreak

‘nano’ text editor

‘nano’ is a basic text editor, very simple to use and displaying available commands at the bottom of the screen. For example, to leave ‘nano’ , use ^X (press CTRL + X)

How to setup ‘ssh’ trusts between Linux and

...

title	Notes

HP-UX

Please note:

The prompts will tell you where to execute the commands, "

...

HPUX#" (root user) or "Linux#" (root user)
Remember Linux/Unix is case sensitive
If hosts are not known by each other, fill the /etc/hosts file for example (using vi for example)
linuxhost represents the name of your

...

Charon server (can be any name you want)

...

hpuxhost represents the hostname of your

...

HP-UX virtual machine

Generate the key

...

On the HP-UX system, enter the following commands if the folder does not already exist:

HPUX# mkdir /.ssh
HPUX# chmod 600 /.ssh

On the Linux server, enter:

Linux# ssh-keygen -t rsa

→ → Do not specify a any passphrase.

Linux# ssh-keygen -e -f cd /root/.sshLinux# chmod 600 id_rsa*
Linux# scp id_rsa.pub > linuxhost hpuxhost:/.ssh/linuxhost_rsa.pub

...

Tru64# cd /.ssh2
Tru64# echo "Key linuxhost.pub" >> authorization

Initialize the first ssh connection (answer 'yes' to confirm)

...

Linux# ssh tru64host date

then retry the same command to verify the trust is working.

If an error occurs, you can check and clean the /root/.ssh/known_host file on the Linux host

How to setup ‘ssh’ trusts between Linux and VMS

...

title	Notes

→ Enter the password for the copy operation to complete

On the HP-UX system, add the Linux server key to the authorized keys:

HPUX# cd /.ssh
HPUX# cat linuxhost_rsa.pub >>authorized_keys
HPUX# chmod 600 authorized_keys

Perform a simple test on the Linux server:

Linux# ssh hpuxhost hostname
hpuxhost

If trying to execute a remote command on the HP-UX system, a message telling "no matching cipher found" is displayed, the cipher has to be setup on the Linux server side in the /root/.ssh/config file:

Linux# cat /root/.ssh/config

Host hpuxhost Hostname hpuxhost KexAlgorithms +diffie-hellman-group1-sha1 HostKeyAlgorithms +ssh-rsa Ciphers +3des-cbc

Div

class	pagebreak

How to install 'rsh' on RHEL 8

To setup 'rsh' on RHEL8, use the following commands:

# dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm

# ARCH=$( /bin/arch )

# subscription-manager repos --enable "codeready-builder-for-rhel-8-${ARCH}-rpms"

# dnf -y install rsh

More information in this article: rsh and rsh-server packages missing in RHEL 8

How to setup ‘rsh’ trusts between Linux and HP-UX

Please note:

The prompts will tell you where to execute the commands, "

...

HPUX#" (

...

root user) or "Linux#" (root user)
Remember Linux/Unix is case sensitive

...

If hosts are not known by each other, fill the /etc/hosts file for example

...

VMS$ SET DEF SYS$LOGIN
VMS$ @TCPIP$CONFIG

...

...
* Create a new default server host key? YES: YES
Creating private key file: TCPIP$SSH_DEVICE:TCPIP$SSH.SSH2]HOSTKEY
Creating public key file: TCPIP$SSH_DEVICE:TCPIP$SSH.SSH2]HOSTKEY.PUB
...

...

Linux# ssh-keygen -t rsa

→ Do not specify a passphrase
Linux# ssh-keygen -e -f /root/.ssh/id_rsa.pub > /root/.ssh/linuxserver.pub

Copy the generated file /root/.ssh/linuxserver.pub (or use copy/paste between putty session for example) to the VMS system in the SYS$SYSROOT:[SYSMGR.SSH2] directory
If this folder does not exist, create it using the following command: $ CREATE /DIRECTORY SYS$SYSROOT:[SYSMGR.SSH2]

On the VMS system add the Linux server key to the authorized keys:
VMS$ SET DEF SYS$SYSLOGIN
VMS$ SET DEF SYS$SYSROOT:[.SSH2]
VMS$ OPEN/WRITE TMP AUTHORIZATION.
If the file already exists, use /APPEND instead of /WRITE
VMS$ WRITE TMP "KEY LINUXSERVER.PUB"
VMS$ CLOSE TMP
Do not forget the dot at the end of the authorization file name
Perform some tests (examples)
Charon server name "charon", vms system name "pluto":
charon# ssh system@pluto "show system /noproc"
OpenVMS V7.3-2 on node PLUTO 27-SEP-2013 11:50:14.37 Uptime 0 19:20:07(using vi for example)
linuxhost represents the name of your Charon server (can be any name you want)
hpuxhost represents the hostname of your HP-UX virtual machine

Introduction

RSH executes commands on a remote host. It can be used to issue a shutdown on the Charon Tru64 virtual machine.

Pre-requisites

The RSH method requires the 'rsh' package. It can be installed using the following command:

Linux# yum install rsh

Notes

On the HP-UX system issuing the shutdown, create a proxy between the root user of the Charon server and the user.

Example:

HPUX# echo "linuxhost root" >>~/.rhosts

If the Charon server name is not known to the TCPIP database, edit the /etc/hosts file and add the server ip address and its name.

Ensure manual commands can be passed to the HP-UX system from the Charon server.

Example:

Linux# rsh linuxhost date

If a "poll: protocol failure in circuit setup" is returned, the firewall settings have to be set to open ports 1011 to 1023.

Please always refer to your network administrator when changing the firewall rules, commands below are given as example only.

Example:

# firewall-cmd --permanent --new-service=Charon# firewall-cmd --permanent --service=Charon --add-port=1011-1023/tcp# firewall-cmd --get-active-zonespublicinterfaces: ens34 ens35# firewall-cmd --zone=public --permanent --add-service=Charon# firewall-cmd --reload

Div

class	pagebreak

Shutdown guests with Expect tool

Introduction

In case SSH cannot nor RSH can not be used to perform clean shutdown of the guests, the "expect" tool can be used to connect to the console, perform the login operation and execute the shutdown command depending on the console status (at login prompt, shell prompt or SRM prompt).

The operations performed during the "expect" script execution are detailed in the VM management - Create/Edit guest stop script chapter.

In this case the password is sent without encryption.

To facilitate use of "expect" for shutdown, an example is provided in the "guest_shutdown.exp" script located in the /opt/charon/utils folder. If you plan to customize the script, you'll have to create a copy and not use it directly as it will be overwritten in case of Toolkit upgrade.

Please note:

'telnet' and 'expect' packages must be installed in order to use this feature.

The following error message can be returned when stopping the virtual machine when trying to use the expect script example:

if expect package is not installed: "Stop script returned error code 126".
if telnet is not installed: "%EXPECT-F-NOSRM, Cannot continue, 'telnet' is not installed" then "Stop script returned error code 4"

Caution: the virtual machine process will be however killed by service management process

...

.

If console is locked:

Any active session to the console must be killed before the "expect" script is executed.

For example, if you are connected via "telnet" on the localhost/port (the kill is not done inside the expect script).

...

Using the "/opt/charon/utils/charon_gstart

...

_expect" script file the necessary operations will be performed.

If the console is locked from another host (if you use putty for example), you will have to cancel the connection by yourself otherwise the shutdown will not be performed cleanly.

...

This script can handle the following situations:

...

Expect: "Username: " (VMS) or "login: " (Tru64)
Action: An interactive session will be initiated based on <user> and <password> provided in the parameters

...

Expect: ‘>>>’ (so works with VAX and Alpha with "P00>>>")
Action: A 'power off' command will be issued. If the command is not recognized, the F6 key will be sent (this must be enabled within the configuration file). If the F6 key did not stop the emulator, the script will exit with error code 9 meaning you will have to kill the emulator process yourself (see examples in the "/opt/charon/utils/charon_gstart.stop.example" file)

Div

class	pagebreak

Script usage

...

# path/script <port> <user> <password> <prompt> <opsys>

Parameters:

Parameter	Description
<port>	telnet port number (example: 1000330001)
<user>	username for login (must be able to perform shutdown)
<password>	password
<prompt>	shell prompt (including end space) or last characters of the prompt
<opsys>VMS	or UNIXHPUX or MPEIX (case sensitive)

Example for HP-UX:

Image Removed

Examples are given in the

# /opt/charon/utils/guest_shutdown.exp 30001 root 12345 "# " HPUX

Example for MPEIX:

# /opt/charon/utils/

...

guest_

...

shutdown.exp 30001 X X X MPEIX

How to restart CHARON-

...

PAR on Linux automatically on failure

This part only applies to Linux distributions using systemd thus Red Hat Enterprise Linux 6.x versions are not concerned.

...

Automatic restart on failure is managed by systemd at Linux level, please refer to systemd man pages.

For example, edit the service configuration file and add the following parameters

...

:

Parameter	Type	Description
`Restart`	text	Configures whether the service shall be restarted when the service process exits, is killed, or a timeout is reached
`RestartSec`	numeric	Configures the time to sleep before restarting a service (as configured with `Restart=`). Takes a unit-less value in seconds, or a time span value such as "5min 20s". Defaults to 100ms.
`StartLimitInterval`	numeric	Configure service start rate limiting. By default, services which are started more than 5 times within 10 seconds are not permitted to start any more times until the 10 second interval ends. With these two options, this rate limiting may be modified. Use `StartLimitInterval=` to configure the checking interval (defaults to `DefaultStartLimitInterval=` in manager configuration file, set to 0 to disable any kind of rate limiting). Use `StartLimitBurst=` to configure how many starts per interval are allowed (defaults to `DefaultStartLimitBurst=` in manager configuration file).
`StartLimitBurst`	numeric

Include Page

	KBCOMMON:DOC-GoToToc
	KBCOMMON:DOC-GoToToc

Versions Compared

Old Version 1

New Version Current

Key

‘gedit’ graphical editor

‘nano’ text editor

How to setup ‘ssh’ trusts between Linux and

HP-UX

How to setup ‘ssh’ trusts between Linux and VMS

How to install 'rsh' on RHEL 8

How to setup ‘rsh’ trusts between Linux and HP-UX

Shutdown guests with Expect tool

Introduction

Script usage

How to restart CHARON-

PAR on Linux automatically on failure

Page Comparison

Versions Compared

Old Version 1

New Version Current

Key

‘gedit’ graphical editor

‘nano’ text editor

How to setup ‘ssh’ trusts between Linux and

HP-UX

How to setup ‘ssh’ trusts between Linux and VMS

How to install 'rsh' on RHEL 8

How to setup ‘rsh’ trusts between Linux and HP-UX

Shutdown guests with Expect tool

Introduction

Script usage

How to restart CHARON-

PAR on Linux automatically on failure