...
| Table of Contents | ||||
|---|---|---|---|---|
|
Charon-HPA Model Names
HP9000 Model Names
The model names of Charon-HPA emulated HP9000 systems consist of three parts:
...
- family-name describes the model family, e.g., rp2400,
- number-of-cpus describes the number of emulated CPUs, and
- clock-speed describes the CPU clock frequency in MHz.
Example:
rp2470-2-750 stands for an rp2470 model with two 750-MHz CPUs.
Abbreviations are possible, e.g,, rp2470-1 stands for an rp2470-1-750 model.
HP3000 Model Names
The model names of Charon-HPA
...
This chapter describes the hardware configuration of the supported emulated HP9000 models. This information will be referred to in other section, e.g., the configuration file reference.
Terminology:
In the following sections, an important part of the hardware configuration of an emulated model are the so called device emulated HP3000 systems consist of three parts:
<family-name>-<number-of-cpus>-<clock-speed>
Parameters:
- family-name describes the model family, e.g., A400,
- number-of-cpus describes the number of emulated CPUs multiplied by 100, and
- clock-speed describes the CPU clock frequency in MHz.
Example:
A400-100-110 is single-CPU A400 system running at 110 MHz.
Device Addressing Terminology
In the following sections, an important part of the hardware configuration of an emulated model are the so called device paths.
A device path has the following structure: SBA/LBA/device-number/function[.target.LUN]. These components have the following meaning:
...
- SBA 0, LBA 0, device number 1, function 0 results in a device path of 0/0/1/0
- SBA 0, LBA 2, device number 1, function 1 results in a device path of 0/2/1/1
- SBA 0, LBA 0, device number 1, function 0, SCSI target ID 1, LUN 0 results in a device path of 0/0/1/0.1.0
...
Charon-HPA - Supported Emulated HP9000 Models
This chapter describes the hardware configuration of the supported emulated HP9000 models. This information will be referred to in other section, e.g., the configuration file reference.
A400 Model Family
A400 Family Overview
...
Ten PCI slots are available for expansion:
Slot number | Device path (SBA/LBA/device) |
|---|---|
| 3 | 0/4/2 |
| 4 | 0/4/0 |
| 5 | 0/2/0 |
| 6 | 0/5/0 |
| 7 | 0/1/0 |
| 8 | 0/3/0 |
| 9 | 0/9/0 |
| 10 | 0/8/0 |
| 11 | 0/12/0 |
| 12 | 0/10/0 |
...
| class | pagebreak |
|---|
N4000 (rp7400) Model Family
...
path (SBA/LBA/device) | |
|---|---|
| 3 | 0/4/2 |
| 4 | 0/4/0 |
| 5 | 0/2/0 |
| 6 | 0/5/0 |
| 7 | 0/1/0 |
| 8 | 0/3/0 |
| 9 | 0/9/0 |
| 10 | 0/8/0 |
| 11 | 0/12/0 |
| 12 | 0/10/0 |
| Div | ||
|---|---|---|
| ||
N4000 (rp7400) Model Family
N4000 (rp7400) Family Overview
| Model name | No. of CPUs | Max. RAM in GB | CPU Freq. MHz | HP-UX Model String | Configuration model name (for max. no. of CPUs) |
|---|---|---|---|---|---|
| N4000, rp7400 | 1-8 | 32 | 360 440 550 650 750 | 9000/800/N4000-36 9000/800/N4000-44 9000/800/N4000-5X 9000/800/N4000-6X 9000/800/N4000-7X | rp7400-8-360 rp7400-8-440 rp7400-8-550 rp7400-8-650 rp7400-8-750, rp7400-8, rp7400 |
N4000 (rp7400) Hardware Configuration
N4000 systems have 14 PCI buses.
Built-in controllers (all on PCI bus 0 of system bus adapter 0):
| Controller | Device path(s) |
|---|---|
| DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller | 0/0/0/0 |
| SCSI-2 Controller | 0/0/1/0 |
| Dual SCSI-3 LVD controller | 0/0/2/0 and 0/0/2/1 |
| Diva serial PCI card with 2 available serial ports | 0/0/4/0.0 and 0/0/4/0.1 |
Twelve PCI slots are available for expansion:
Slot number | Device path (SBA/LBA/device) |
|---|---|
| 1 | 0/5/0 |
| 2 | 0/4/0 |
| 3 | 0/12/0 |
| 4 | 0/8/0 |
| 5 | 0/10/0 |
| 6 | 0/2/0 |
| 7 | 1/12/0 |
| 8 | 1/10/0 |
| 9 | 1/4/0 |
| 10 | 1/2/0 |
| 11 | 1/8/0 |
| 12 | 1/0/0 |
| Div | ||
|---|---|---|
| ||
Charon-HPA - Supported Emulated HP3000 Models
This chapter describes the hardware configuration of the supported emulated HP3000 models. This information will be referred to in other section, e.g., the configuration file reference.
A400 Model Family
A400 Family Overview
| Model name | No. of CPUs | Max. RAM in GB | CPU Freq. MHz | Configuration model name (for max. no. of CPUs) |
|---|---|---|---|---|
| A400 | 1 | 2 | 110 150 | A400-100-110 A400-100-150 |
A400 Family Hardware Configuration
Models of the A400 family have 3 PCI buses.
Built-in controllers (all on PCI bus 0):
| Controller | Device path(s) |
|---|---|
| DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller | 0/0/0/0 |
| Dual SCSI-2 Controller | 0/0/1/0 and 0/0/1/1 |
| Dual SCSI-3 LVD controller | 0/0/2/0 and 0/0/2/1 |
| Diva serial PCI card with 2 available serial ports | 0/0/4/0.0 and 0/0/4/0.1 |
Two PCI slots are available for expansion:
Slot number | Device path (SBA/LBA/device) |
|---|---|
| 1 | 0/2/0 |
| 2 | 0/4/0 |
A500 Model Family
A500 Family Overview
| Model name | No. of CPUs | Max. RAM in GB | CPU Freq. MHz | Configuration model name (for max. no. of CPUs) |
|---|---|---|---|---|
| A500 | 1-2 | 8 | 140 | A500-200-140 A500-200-200 |
A500 Family Hardware Configuration
Models of the A500 family have 4 PCI buses.
Built-in controllers (all on PCI bus 0):
| Controller | Device path(s) |
|---|---|
| DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller | 0/0/0/0 |
| SCSI-2 Controller | 0/0/1/0 |
| Dual SCSI-3 LVD controller | 0/0/2/0 and 0/0/2/1 |
| Diva serial PCI card with 2 available serial ports | 0/0/4/0.0 and 0/0/4/0.1 |
Four PCI slots are available for expansion:
Slot number | Device path (SBA/LBA/device) |
|---|---|
| 1 | 0/2/0 |
| 2 | 0/4/0 |
| 3 | 0/6/0 |
| 4 | 0/6/2 |
N4000 Model Family
N4000 Family Overview
| Model name | No. of CPUs | Max. RAM in GB | CPU Freq. MHz |
|---|
| Configuration model name (for max. no. of CPUs) |
|---|
| N4000 |
| 1- |
| 4 | 16 | 220 330 380 440 500 550 |
650
750 |
9000/800/N4000-44
9000/800/N4000-5X
| N4000-100- |
| 220 |
| N4000- |
| 100-330 |
| N4000- |
| 200- |
| 380 |
| N4000- |
| 400-440 |
| N4000- |
| 400- |
| 500 |
| N4000- |
| 400- |
| 550 |
| N4000- |
| 400-750 |
N4000
Hardware Configuration
N4000 systems have 14 PCI buses.
Built-in controllers (all on PCI bus 0 of system bus adapter 0):
| Controller | Device path(s) |
|---|---|
| DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller | 0/0/0/0 |
| SCSI-2 Controller | 0/0/1/0 |
| Dual SCSI-3 LVD controller | 0/0/2/0 and 0/0/2/1 |
| Diva serial PCI card with 2 available serial ports | 0/0/4/0.0 and 0/0/4/0.1 |
Twelve PCI slots are available for expansion:
Slot number | Device path (SBA/LBA/device) |
|---|---|
| 1 | 0/5/0 |
| 2 | 0/4/0 |
| 3 | 0/12/0 |
| 4 | 0/8/0 |
| 5 | 0/10/0 |
| 6 | 0/2/0 |
| 7 | 1/12/0 |
| 8 | 1/10/0 |
| 9 | 1/4/0 |
| 10 | 1/2/0 |
| 11 | 1/8/0 |
| 12 | 1/0/0 |
| Include Page | ||||
|---|---|---|---|---|
|