Versions Compared

Version Old Version 2 New Version 3
Changes made by

W.Erber

W.Erber

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Integrate discussion results; continue chapter

...

Model names of Charon-HPA emulated systems consist of three parts:

<family-name>-<number-of-cpus>-<clock-speed>

Parameters:

  • family-name describes the model family, e.g., rp2400,
  • number-of-cpus describes the number of emulated CPUs, and
  • clock-speed describes the CPU clock frequency in MHz.

...

Charon-HPA - Supported Emulated HP9000 Models

This section chapter describes the hardware configuration of the supported emulated HP9000 models. This information will be referred to in other section, e.g., the configuration file reference.Terms used in

Terminology:

In the following sections:

...

, an important part of the hardware configuration of an emulated model are the so called device paths.

A device path has the following structure: SBA/LBA/device-number/function[.target.LUN]. These components have the following meaning:

  • SBA: system bus adapter
  • LBA: local bus adapter
  • Device number: identification of an individual device (e.g., and Ethernet card).
  • Function: identification of a particular unit of functionality (e.g., one Ethernet port or one SCSI bus) of on a PCI specific device. There can be up to four functions per device.Device path
  • Target: unique identification of a device and function on a PCI bus.

...

  • optional further identification. Its use depends on the type of device connected. For example, a SCSI target ID.
  • LUN: logical unit number of SCSI devices (e.g., disks and tapes). Used to address a logical unit associated with a SCSI target ID.

Examples:

  • Realm SBA 0, PCI bus number LBA 0, device number 1, function 0 results in a full device path of 0/0/1/0,
  • Realm SBA 0, PCI bus number LBA 2, device number 1, function 1 results in a full device path of 0/2/1/1
  • SBA 0, LBA 0, device number 1, function 0, SCSI target ID 1, LUN 0 results in a device path of 0/0/1/0.1.0

A400 Model Family

A400 Family Overview

Model nameNo. of
CPUs		Max. RAM
in GB		CPU Freq.
MHz		HP-UX Model StringConfiguration model name
(for max. no. of CPUs)
A400, rp240012360
440		9000/800/A400-36
9000/800/A400-44		rp2400-1-360
rp2400-1-440, rp2400-1, rp2400
A400, rp243012550
650		9000/800/A400-5X
9000/800/A400-6X		rp2430-1-550
rp2430-1-650, rp2430-1, rp2430
rp2405126509000/800/A400-6Xrp2405-1-650-A7121A

...

ControllerDevice path(s)
DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller0/0/0/0
Dual SCSI-2 Controller0/0/1/0 and 0/0/1/1
Dual SCSI-3 LVD controller0/0/2/0 and 0/0/2/1
Diva serial PCI card with 2 available serial ports0/0/4/0.0 and 0/0/4/0.1


Two additional PCI slots are available for expansion:

Slot number
Device path without functionpath 
(realmSBA/busLBA/device)
10/2/0
20/4/0

A500 Model Family

A500 Family Overview

Model nameNo. of
CPUs		Max. RAM
in GB		CPU Freq.
MHz		HP-UX Model StringConfiguration model name
(for max. no. of CPUs)
A500, rp24501-28

360
440
550

9000/800/A500-36
9000/800/A500-44
9000/800/A500-5X		rp2450-2-360
rp2450-2-440
rp2450-2-550, rp2450-2, rp2450
A500, rp24701-28650
750		9000/800/A500-6X
9000/800/A500-7X		rp2470-2-650
rp2470-2-750, rp2470-2, rp2470
rp24051-286509000/800/A500-6Xrp2405-2-650, rp2405-2, rp2405

...

ControllerDevice path(s)
DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller0/0/0/0
SCSI-2 Controller0/0/1/0
Dual SCSI-3 LVD controller0/0/2/0 and 0/0/2/1
Diva serial PCI card with 2 available serial ports0/0/4/0.0 and 0/0/4/0.1


Four additional PCI slots PCI slots are available for expansion:

Slot number
Device path 
(SBA/LBA/device)
10/2/0
20/4/0
30/6/0
40/6/2

L-Class and rp54xx Model Families

L-Class and rp54xx Families Overview

Model nameNo. of
CPUs		Max. RAM
in GB		CPU Freq.
MHz		HP-UX Model StringConfiguration model name
(for max. no. of CPUs)
L1000, rp54001-28360
440
550		9000/800/L1000-36
9000/800/L1000-44
9000/800/L1000-5X		rp5400-2-360
rp5400-2-440
rp5400-2-550, rp5400-2, rp5400
L2000, rp54501-416360
440
550		9000/800/L2000-36
9000/800/L2000-44
9000/800/L2000-5X		rp5450-4-360
rp5450-4-440
rp5450-4-550, rp5450-4, rp5450
L1500, rp54301-28

360
440
550
650
750

875

9000/800/L1500-36
9000/800/L1500-44
9000/800/L1500-5X
9000/800/L1500-6X
9000/800/L1500-7X

9000/800/L1500-8X

rp5430-2-360
rp5430-2-440
rp5430-2-550
rp5430-2-650
rp5430-2-750, rp5430-2, rp5430

rp5430-2-875

L3000, rp54701-416

550
650
750

875

9000/800/L3000-5X
9000/800/L3000-6X
9000/800/L3000-7X

9000/800/L3000-8X

rp5470-4-550
rp5470-4-650
rp5470-4-750, rp5470-4, rp5470

rp5470-4-875

rp54051-4166509000/800/L3000-6Xrp5405-4-650

L1000 (rp5400) Hardware Configuration

L1000 systems have 8 PCI buses.

Built-in controllers (all on PCI bus 0):

ControllerDevice path(s)
DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller0/0/0/0
SCSI-2 Controller0/0/1/0
Dual SCSI-3 LVD controller0/0/2/0 and 0/0/2/1
Diva serial PCI card with 2 available serial ports0/0/4/0.0 and 0/0/4/0.1


Six PCI slots are available for expansion:

Slot
number
Device path 
(SBA/LBA/device)
30/1/3
80/2/0
90/6/0
100/3/0
110/7/0
120/4/0
Device path without function (realm/bus/device)
10/2/020/4/030/6/040/6/2

L2000 (rp5450) Hardware Configuration

L2000 systems have 8 PCI buses.

Built-in controllers (all on PCI bus 0):

ControllerDevice path(s)
DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller0/0/0/0
SCSI-2 Controller0/0/1/0
Dual SCSI-3 LVD controller0/0/2/0 and 0/0/2/1
Diva serial PCI card with 2 available serial ports0/0/4/0.0 and 0/0/4/0.1


Ten PCI slots are available for expansion:

Slot
number
Device path 
(SBA/LBA/device)
30/1/3
40/1/2
50/1/1
60/1/0
70/5/0
80/2/0
90/6/0
100/3/0
110/7/0
120/4/0

L1500 (rp5430) Hardware Configuration

L1500 systems have 7 PCI buses.

Built-in controllers (all on PCI bus 0):

ControllerDevice path(s)
DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller0/0/0/0
SCSI-2 Controller0/0/1/0
Dual SCSI-3 LVD controller0/0/2/0 and 0/0/2/1
Diva serial PCI card with 2 available serial ports0/0/4/0.0 and 0/0/4/0.1


Six PCI slots are available for expansion:

Slot
number
Device path 
(SBA/LBA/device)
30/4/2
80/3/0
90/9/0
100/8/0
110/12/0
120/10/0

L3000 (rp5470) and rp5405 Hardware Configuration

L3000 and rp5405 systems have 10 PCI buses.

Built-in controllers (all on PCI bus 0):

ControllerDevice path(s)
DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller0/0/0/0
SCSI-2 Controller0/0/1/0
Dual SCSI-3 LVD controller0/0/2/0 and 0/0/2/1
Diva serial PCI card with 2 available serial ports0/0/4/0.0 and 0/0/4/0.1


Ten PCI slots are available for expansion:

Slot
number
Device path 
(SBA/LBA/device)
30/4/2
40/4/0
50/2/0
60/5/0
70/1/0
80/3/0
90/9/0
100/8/0
110/12/0
120/10/0


N4000 (rp7400) Model Family

N4000 (rp7400) Family Overview

Model nameNo. of
CPUs		Max. RAM
in GB		CPU Freq.
MHz		HP-UX Model StringConfiguration model name
(for max. no. of CPUs)
N4000, rp74001-832360
440
550
650
750		9000/800/N4000-36
9000/800/N4000-44
9000/800/N4000-5X
9000/800/N4000-6X
9000/800/N4000-7X		rp7400-8-360
rp7400-8-440
rp7400-8-550
rp7400-8-650
rp7400-8-750, rp7400-8, rp7400

N4000 (rp7400) Hardware Configuration

N4000 systems have 14 PCI buses.

Built-in controllers (all on PCI bus 0 of system bus adapter 0):

ControllerDevice path(s)
DEC 21142 Tulip 10/100Gbit/sec. Ethernet controller0/0/0/0
SCSI-2 Controller0/0/1/0
Dual SCSI-3 LVD controller0/0/2/0 and 0/0/2/1
Diva serial PCI card with 2 available serial ports0/0/4/0.0 and 0/0/4/0.1
Diva serial PCI card with ??? available serial ports0/0/5/0.x


Twelve PCI slots are available for expansion:

Slot
number
Device path 
(SBA/LBA/device)
10/5/0
20/4/0
30/12/0
40/8/0
50/10/0
60/2/0
71/12/0
81/10/0
91/4/0
101/2/0
111/8/0
121/0/0



Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc