| Include Page |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
|
...
In some emulator products it is possible to configure the number of retries and the waiting time between them by adding parameters to the emulator configuration file. Please refer to the product documentation for the details regarding the relevant parameters: license_retry_period and license_retry_count parameters (obsolete starting with version 1.10)
2. At regular intervals during the runtime of the emulator (the default license check period of 1 hour can be changed by Stromasys using the appropriate license parameters):
...
A software license does not require any special hardware but it still requires installation of the Sentinel runtime environment.
Please note:
- To avoid unexpected problems, do not use any Sentinel runtime software that was not provided by Stromasys without being advised to do so by your Stromasys representative.
- Software licenses are best suited for stable environments, because their correct function depends on certain characteristics of the host system. Changing any of these characteristics will invalidate the license.
- If the Charon host runs on real hardware, software licenses are by default tightly bound to the hardware for which they were issued. If major hardware characteristics of the system are changed, the license will be disabled.
- If the Charon host runs in a virtual environment (e.g., VMware), software licenses are normally bound to the virtual machine ID and a set of additional characteristics of the virtual machine. If any of these parameters are changed, the license will be disabled.
- Software licenses are very sensitive to even small changes on the host system. Therefore, it is especially important to provide for a backup license that will ensure continued operation should there be a problem with the software license. See Handling Multiple License Keys and Product Licenses for details.
...
| Excerpt |
|---|
|
If the VE license server is not installed on the same system as the emulator, any intermediate firewall must allow at least the port on which the license is served. Optionally, the firewalls must allow the port on which the web-based GUI is available. These ports are configurable on the VE license server. The default values are the following: - Default port on which licenses are served by the VE license server: TCP 8083.
- Default port on which the web-based GUI runs: TCP 8084.
|
Creating a C2V File on a VE License Server
...
| Insert excerpt |
|---|
| PDC:__Include: Installing a License on the VE License Server |
|---|
| PDC:__Include: Installing a License on the VE License Server |
|---|
| name | VEesxi_bind |
|---|
| nopanel | true |
|---|
|
Creating a VE C2V File and Sending it to Stromasys
...