Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Update lif information.

...

Important commands in the main menu:

CommandDescription

boot pri

Boot from the primary boot device.
boot alt
Boot from the alternative boot device.
boot deviceBoot from device with specified device path. Example device path: 0/0/1/0.0.0
path priDisplay primary boot path.
path altDisplay alternative boot path.
path <pri | alt> pathSet the boot path. If neither PRI nor ALT is specified, the primary path will be set.
searchSearch for boot devices
lif path lifimage

Boot a lif file.

This parameter is currently

There are currently two use cases:

  • When used to boot a single image, it is mostly used for testing. Use only as advised by Stromasys. The path parameter is a SCSI device path for 64-bit systems, on a 32-bit system it can be the device path of a network card or a SCSI device path. The lifimage parameter contains the path of the bootable lif file (absolute path or path relative to the directory in which the emulator runs).
  • Used to emulate booting a system from a Ignite-UX server (for example, to install the operating system). In this case, the content of the TFTP boot directory is downloaded from the Ignite server to a path accessible by the emulator. The feature was introduced in version 3.0.9. Please refer to Installing a client system from an Ignite-UX server for more information.
resetRestart the system.


Div
classpagebreak


Important commands only available in the configuration menu:

...